They should also be realistic when measuring results.
在考量结果的时候也要实际一点。
Measuring results of two microscope objectives were also given.
并给出了对两个显微物镜测量的结果。
The plating measuring results were agreed well with the conclusion.
在实际施镀过程中也得到了一致的结论。
The principle, equiPment, calculation method and measuring results are described in detail.
本文详细介绍了该装置的原理、设备、计算方法以及测定结果。
Even if the measured frequency is low, the highly accurate measuring results can be obtained.
即使被测频率比较低，仍能取得很高的测量精度。
In addition to measuring results, you need to measure mood, mindset, and the mechanisms above.
除了衡量结果，还需要衡量上述的气氛、理念和机制。
Evidence provides the foundation for setting priorities, defining strategies, and measuring results.
证据能够为确定重点、制定战略和衡量成果提供依据。
The accuracy of the measuring results is also raised due to the reduction of intermediate links.
由于减少了中间环节，测量结果的精度也得到了提高。
If all the measuring results are the same, the checking fixture can be accepted, otherwise rejected.
如果所有的测量结果一致则接收该检具，否则应改进或重新评价该检具。
By the analysis of the measuring results, the basic factors which would change valve timing were given.
在对测定结果分析的基础上提出了影响配气正时变动的主要因素。
The practical measuring results can provide of reliable bases for aseismatic design of such structures.
测试结果为此类结构的抗震设计提供了基础资料。
It is found that the magnitude and stability of contact resistance greatly affect the measuring results.
发现接触电阻的大小和稳定程度对测量结果有极大的影响。
The temperature variation in dynamic measurement will cause temperature errors in the measuring results.
动态测量中的温度变化会使测量结果产生温度误差。
The changes of measuring results arising from the transformation of the working frequency are calculated.
本文还对由工作频率变化引起的测量结果的改变作了讨论。
Through robust statistics, put forward a robust estimation algorithm to estimate measuring results and error.
通过鲁棒统计，提出了一个鲁棒估计算法处理测量结果和误差。
Configurable for standard RS-232 output port, and then send measuring results to micro printers and computers.
可配置标准RS- 232输出端口，将测量结果输出至微型打印机或电脑。
When measuring, virtual instruments are inevitable to cause error damaging the precision of measuring results.
虚拟测试仪器在测试过程中不可避免地会产生误差，影响测试结果的精度。
Various measuring results of model machine of array neutron logging in the model are introduced simultaneously.
同时介绍了阵列中子测井样机在模型井中的各种测量结果。
Measuring results of flow and water holdup adopt continuous measuring modes with different depths in the logging field.
现场测井时，流量和含水率测量值均采用随不同深度连续测量方式。
The measuring results indicate that the accurate, real time and on line measuring of the roundness error can be realized.
测量结果表明，新的测量方法实现了圆度误差的实时精确在线测量。
In this paper, working principle of pump and its pumping performances are introduced, the measuring results are also given.
本文介绍了该泵的工作原理和抽气特性。文中还给出了测试结果。
The measuring results of the above sensors indicate that the micromachining is very important to improve their performances.
传感器性能的测试结果表明了微机械加工对提高传感器性能的重要性。
The influence of light source stability, CCD performance and AD sampling digit on the stability of measuring results is analyzed.
着重分析了光源稳定性、CCD性能、AD采样位数对测量结果稳定性的影响。
Graphical output directly displays on-line measuring results and is good for analysis and adjustment of a processing and production line.
图形化输出直观地显示在线测量结果，利于对加工生产线的分析和调整。
The involute pinion cutter grinding experiment made in the laboratory and the measuring results prove that the former calculate result is valid.
在实验室进行的渐开线插齿刀磨齿实验的测量结果证实了上述计算结果的正确性。
Curves of axial temperature affected by different inlet press and geometrical structures of vortex chamber were drawn according to the measuring results.
根据实测结果，得到了进气压力及涡流室几何结构对涡流管部分轴线温度分布的影响曲线。
The development background, casing property index, product process production property measuring results and casing used result in oil-field are presented.
介绍了该钢级套管的开发背景、套管的性能指标、基本生产工艺流程、实际性能检验结果及油田的使用结果。
Referred to American Holloman sled technical index, this paper introduces the estimate of Chinese XB rocket sled test track and gives the measuring results.
介绍了我国XB火箭橇试验滑轨参照美国霍洛曼滑轨有关技术指标进行评估的情况，并给出测量结。
The paper shows the measuring results of blunt radius of diamond tool, precision glass grating and profile and topography of ultra-precision polished ceramics.
给出了金刚石刀具钝圆半径与精密玻璃光栅和超精密抛光陶瓷的轮廓形貌的测量结果。
The paper shows the measuring results of blunt radius of diamond tool, precision glass grating and profile and topography of ultra-precision polished ceramics.
给出了金刚石刀具钝圆半径与精密玻璃光栅和超精密抛光陶瓷的轮廓形貌的测量结果。
应用推荐