At last, the reason of why the TCSC can restrain the LFO is given by use of the plural coefficient torque method.
最后，应用复系数转矩分析法研究了可控串联补偿实现抑制低频振荡的机理。
Compared with the computed torque method, the algorithm can give error convergence bound clearly without acceleration measurement and inverse inertia matrix.
与传统计算力矩法相比，在不要求加速度测量和惯性矩阵求逆的情况下，算法给出清晰的跟踪误差收敛域。
Has introduced the principle of the air-gap torque method, give the hardware of the ventilator efficiency testing system and illustrated the efficiency testing process.
介绍了气隙转矩法的工作原理，给出了通风机效率现场测试系统的硬件组成，并阐述了效率测试过程。
Three methods that are computed torque method, robust control and variable structure sliding mode control were used in the precise control of the series-parallel 6-dof robot.
本文采用了三种方法：计算力矩法、鲁棒控制及变结构滑模控制，对6- DOF串并联机器人进行了精确控制。
By simultaneously sampling roll-bar speed and estimating tension by electric current-torque method the forward slip model for continuous shape rolling can be identified on-line.
在正常连轧生产条件下，同时在线采集轧辊与轧件速度并采用电流—力矩法估计机架问张力值，可以在线地识别前滑模型。
With this method the depth variance of plow, the variance of the revs and the torque of engine can be calculated, according to the given characteristic of stochastic disturbance.
这个计算方法，根据给定的系统随机输入的统计特征，可计算各犁铧耕深的方差、发动机转速和扭矩的方差。
A mutual model reference adaptive method for the rotor speed and stator resistance identification is proposed in this paper to implement a speed sensorless direct torque control of induction motors.
本文介绍了一种可互换模型参考自适应方法实现对电机转速和定子电阻的辨识，并将其应用于异步机的无速度传感器直接转矩控制中。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
The paper presents a method of controlling the motor torque using the motor lead Angle.
提出并实现了一种利用超前角实现变磁阻电机力矩控制的方案。
It is presented a method using fuzzy adaptive system to obtain torque ripple reduction in switched reluctance motor.
介绍用模糊自适应系统控制开关磁阻电机使转矩脉动减小的方法。
This method didn't need to integrate the torque control command of every flywheel and reduced calculation amount.
这种方法不需要对每个飞轮的力矩控制信号进行积分，减小了计算量。
Maxwell stress method is an available one to calculate electromagnetism torque of machines.
麦克斯韦应力张量法是计算电机电磁转矩的有效方法。
By using this method, the SNR of torque measurement is increased a lot.
采用这种方法后，转矩测量的信噪比得到了很大的提高。
This paper presents the realization method of the torque feedback control.
本文给出了力矩反馈控制的实现方法。
A test method of torque synchro rotor quadrature axle damping short-loop loss and current was introduced.
介绍力矩式自整角机转子交轴阻尼短路环损耗和电流的一种测试方法。
It directly controls the electromagnetic torque and stator flux, using the analyzing method of space vector and stator flux orientation.
它采用空间矢量的分析方法，采用定子磁场定向，直接对电动机的电磁转矩和定子磁链进行控制。
Direct torque control is a high-powered control method.
直接转矩控制是一种高性能的控制方法。
In this paper, discrete magnetic field is analysed. We present a method of torque Angle control for stepping synchronous motor.
本文分析了步进同步机的离散磁场，提出了步进同步机矩角直接控制的方法。
According to the theory of graph representation and fundamental circuits, Angle speed and torque equations are presented, and method of efficiency calculation is given.
根据图表示法和基本回路理论，建立角速度和力矩方程，给出了效率的计算方法，较传统方法直观、简便。
This paper introduced working principle of PM Claw-pole stepping motors, including magnetic circuits analysis and torque calculation method.
本文介绍永磁爪极步进电机的工作原理、磁路分析及转矩计算方法。
The measurement method of the torque for rotating machines is studied in this paper.
针对旋转动力机械扭矩的测量方法进行了研究。
In this paper, a new method of direct torque control with advanced invertor and several-value torque controller is introduced.
文章介绍了一种带改进型逆变器和多滞环转矩调节器的新型直接转矩控制方法。
Direct Torque Control (DTC) technology is a high-performance adjustable speed method with fast torque response.
直接转矩控制是一种转矩响应快的高性能的交流调速方法。
A new design method of state selector in asynchronous machines direct torque control system-neural networks design method is introduced.
介绍了异步电动机直接转矩控制系统中状态选择器的一种新型设计方法—神经网络设计方法。
Theoretical analysis and experimental result show that this torque control method is feasible and practical.
理论分析和实验结果均表明该转矩控制方法具有较高的可行性和实用性。
Aiming at characteristics of unpredictability the load torque used in ac motor servo system, a method of load torque adaptive identification based on state observer is presented.
针对交流电机伺服系统中负载转矩不可预测性的特点，提出一种基于状态观测器的负载转矩自适应辨识方法。
Aiming at characteristics of unpredictability the load torque used in ac motor servo system, a method of load torque adaptive identification based on state observer is presented.
针对交流电机伺服系统中负载转矩不可预测性的特点，提出一种基于状态观测器的负载转矩自适应辨识方法。
应用推荐