• 您还将了解锥度对象、圆角选项和斜角功能的使用。

    You will also learn about the use of the Taper object, Fillet option and Bevel function.

    youdao

  • 在连铸过程中,结晶器锥度对提高连铸机的产量、改善铸坯质量、延长结晶器的寿命都起着决定性的作用。

    During continuous casting, the casting mold taper plays a decisive part in increasing the output of continuous caster, improving quality of casting slab and prolonging service life of casting mold.

    youdao

  • 随着连铸技术的进步和对产品质量要求的提高,结晶器锥度的优化设计已被越来越多的学者和生产者所关注。

    With the advancement of the casting process and to meet the demand of the quality, more and more expert and producer have been concerned about the optimization of the mould taper.

    youdao

  • 检查螺旋桨轴与螺旋桨锥度接触面。

    Check for surface contact area (metallic contact) between stern shaft and propeller hub tapers.

    youdao

  • 竿身锥度也直接影响它的动态。

    This taper contributes directly to the "action" of a rod.

    youdao

  • youdao

  • youdao

  • 磁场气隙及磁场锥度连续可调。

    The magnetic gap and magnetic field taper can be continuously adjusted.

    youdao

  • 实现线切割机锥度加工中的4轴联动加工技术。

    The 4-axis linkage in the taper machining is realized.

    youdao

  • API圆螺纹的锥度和中径是两个重要的参数。

    The taper and pitch diameter of API round thread casing are two of the most important parameters.

    youdao

  • 在锥度上,圆坯结晶器为连续的抛物线型锥度。

    The round mould taper is continuous parabola profile in the taper direction.

    youdao

  • 在小锥度角的假设下导得了相应的速度分布公式。

    The formula of velocity distribution is obtained under the small tapered angle condition.

    youdao

  • 提出一种考虑螺旋槽气体密封端面径向锥度的理论模型。

    A theory model considering the face radial coning of spiral groove gas face seals was given.

    youdao

  • 在机械制图中,通常需要进行大量的倒角和锥度的标注工作。

    Marking chamfer and taper is a routine work in Mechanical drawing.

    youdao

  • 如果锥度尺寸数据不完整,显示功能将有助于操作员计算角度。

    If taper dimension data are not complete, the display will help the operator to calculate the angles.

    youdao

  • 在同一锥度下,长锥形长度能提高饱和增益,降低偏振灵敏度。

    Saturation gain increases and polarization sensitivity decreases in condition of longer cone length remaining the same cone degree.

    youdao

  • 结果表明,应用单锥度辊可以有效降低带钢边降,减小带钢总凸度。

    The results show that the use of a taper roll can reduce the edge drop and total crown of strip steel efficiently.

    youdao

  • 铣刀系列:直柄铣刀、直柄键槽铣刀、锥度铣刀以及其它非标铣刀。

    Milling cutter series: straight shank milling cutter, straight shank keyway milling cutter, prick milling cutter, nonstandard milling cutter.

    youdao

  • 通过分析气动测头的测量原理,设计了高精度锥度气动测头及其校对规。

    Based on the analysis of measuring principle of pneumatic gauge head, a high-precision pneumatic gauge head for taper measurement and its reference device are designed.

    youdao

  • 本文介绍液压安装锥度过盈配合的原理、结构、安装技术和有关参数计算。

    It presents the principle and the construction of hydraulic mounting and dismounting, and the calculation of hydraulic interference fit.

    youdao

  • 锥度螺旋填料独特的结构,使其具有与常规填料完全不同的流体力学特性。

    Conical degree spiral packing has unique structure, and has completely different hydromechanical characteristics with the conventional packing.

    youdao

  • 本文阐明了结晶器锥度的实质,进而导出了水平连铸圆坯用结晶锥度的设计公式。

    This article expounds the crux of the mold taper and then deduces the taper engineering formula of the mold for the horizontal continuous caster to cast round billet.

    youdao

  • 本文介绍一种测量石油螺纹量规的螺旋线、中径、锥度和牙形半角的新方法及装置。

    This paper describes a new method and device for measuring helical line, pitch diameter, taper and half-angle of thread of petroleum thread gauges.

    youdao

  • 锥度减小设计为高抛光的锥形柄,允许假体柄在骨水泥套中下沉并再度获得稳定性。

    The taper slip is a highly polished tapered stem designed to settle within the cement mantle and re-engage the taper.

    youdao

  • 密封端面正锥度的增加能使密封气膜刚度显著提高,但同时也使密封的泄漏量有所增加。

    With the increasing of seal face's positive taper, the stiffness of gas film would obviously increase, but the leakage of seal would also increase.

    youdao

  • 轮胎因其结构不对称性导致的胎体锥度及帘布层转向效应,显著影响轮胎的力学特性。

    Tire structure unsymmetry results in conicity and ply-steering, and has significant influence on tire mechanical behavior.

    youdao

  • 其实除了切削圆锥面以外,小滑板还可以用来精车内孔和外圆或实现圆柱锥度误差补偿。

    In fact besides cutting the taper surface, the small feeding carriage can be also used to finish hole and other round or compensate cylinder's taper error.

    youdao

  • 密封端面正锥度的增加能使密封气膜刚度显著提高,但同时也使密封的泄漏量有所增加。

    With the increasing of seal face's positive taper, the stiffness of gas film is obviously increased, but the leakage of seal is also increased.

    youdao

  • 结论:根管预备后锥度在0.08以内对牙根的整体抗压性能和抗疲劳性能无明显影响。

    Conclusion: There is no effect on the whole compressive strength and resistance to cyclic fatigue of tooth root after prepared within 0.08 taper.

    youdao

  • 结论:根管预备后锥度在0.08以内对牙根的整体抗压性能和抗疲劳性能无明显影响。

    Conclusion: There is no effect on the whole compressive strength and resistance to cyclic fatigue of tooth root after prepared within 0.08 taper.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定