目前应用的镁合金中铸造镁合金占主要部分。
In all magnesium alloys cast Mg alloys were widely used by now.
概述了铸造镁合金的基本性质、研究进展及其应用。
The current status of basic properties, study and application of cast magnesium alloy is reviewed.
总结了采用石墨砂湿型铸造镁合金的经验，分析了镁合金铸造的特点。
The experience of cast Mg alloy in graphite green sand mold was summarized and its casting characteristics were analyzed.
系统地总结了各类铸造镁合金的成分、铸造方式与其高、低温力学性能之间的关系。
The relations among composition, casting methods, room-temperature properties and elevated temperature properties of magnesium alloys are summarized systematically.
论述了国外铸造镁合金的发展趋势，其中重点讨论了包括无熔剂熔炼在内的新的铸造工艺以及非铬酸阳极化表面处理工艺。
This article discusses the developments of cast magnesium alloys. New casting technologies including fluxless melting and nonchromated anodisation surface treatments are emphasised.
采用糊态挤压成型镁合金避免了压力铸造的缺点。
By using mushy extrusion molding for magnesium alloy, the disadvantage of pressure casting is avoided.
指出电磁泵低压铸造技术以其特有的优势，将在镁合金轮毂的生产中发挥重要作用。
It is indicated that, with it special merits, low pressure die casting based on the electromagnetic pump will play a important role to produce magnesium wheel.
对在两相区铸造进行半固态制浆所得az91 D镁合金坯料的部分重熔工艺条件及组织演变进行了研究。
The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.
利用消失模铸造压力凝固技术增强AZ91D镁合金补缩能力。
Feeding capacity of AZ91D magnesium alloy is enhanced by using pressure solidification in lost foam casting(LFC).
目前镁合金以压铸成型为主，所有金属成型工艺一般都可用于镁合金的成形加工，如铸造、压力加工和各种机械加工。
Magnesium alloys can be produced by nearly all the metal fabrication methods, such as casting, bulking working and mechanical forming etc.
具体分析了镁合金塑性成型技术与铸造成型工艺相比所具有的优越性，并针对该技术目前存在的问题及解决途径进行了阐述。
Analyze detailedly the superiority of magnesium alloy plastic shaping technology compared with foundry shaping technology, and expound the question and solution method.
研究了AZ91D镁合金在不同半固态温度下的挤压铸造。
The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.
结果表明，AM 60 B镁合金在铸造过程中具有明显的遗传性。
The results showed that AM60B magnesium alloys has an evident heredity in casting.
凝固技术国家重点实验室是国内最早从事镁合金熔炼与铸造研究工作的单位之一。
The State Key Laboratory on solidification is one of the earliest institute which is engaged in magnesium alloys melting and research on casting.
研制开发了一种新型镁合金低压铸造连续化生产技术。
A new type of continuous production technology of low pressure casting for magnesium alloy was developed.
目前，工业用各种镁合金主要的生产方式为铸造方法。
At present, the mainly production methods for all kinds of industrial use magnesium alloy's is casting.
镁合金密度小、粘度低、流动性好，很适合于反重力铸造。
Magnesium alloy with lower density, lower viscosity and excellent liquidity is suitable for anti-gravity casting.
镁合金铸造及镁合金产品的广泛应用造成了大量的镁合金废料。
The magnesium die casting and application of magnesium alloy products lead to significant amount of magnesium scrap.
近十多年来，先进的铸造工艺，例如镁合金压铸、触变压铸得到广泛的应用。
Some advanced casting processes, such as high pressure die magnesium casting and thixocasting, have been widely applied up to recent 10 years.
为了提高镁合金的力学性能和铸造性能，试验研究了典型镁合金zm5的各组元对性能的影响，特别研究了添加金属银对性能的改善。
Influence of the alloying elements, especially Ag addition on the properties of typical Mg alloy ZM5 is studied in order to improve mechanical and cast properties of Mg alloy.
综述了压力铸造和重力铸造两大类抗蠕变镁合金的研究开发现状及其在汽车上的应用状况。
The current research and application status of the creep resistant magnesium alloys used for high pressure die casting and for gravity casting in automobile were reviewed.
用差热分析及热裂环法研究了锑和混合稀土对AZ31镁合金铸造性能的影响。
The effects of antimony and mischmetal on the casting properties of AZ31 alloy were investigated using the differential thermal analysis and hot tearing ring method.
前言：研究了石墨砂对镁合金组织和性能的影响，并对铸造过程中产生的“黑点” 缺陷进行了分析。
The influence of graphite sand on the microstructure and mechanical properties of magnesium alloys were studied, and the black spot defeat on magnesium alloy castings were investigated.
在常规铸造条件下，向高锌镁合金熔体中加入适量混合稀土获得高锌镁合金。
The high zinc magnesium matrix composite was fabricated by adding mix race earth into the molten high zinc magnesium alloy using common casting.
采用常规铸造方法，向ZA155高锌镁合金熔体中加入适量富铈混合稀土获得了稀土合金化的高锌镁合金。
Rare-earth alloyed high zinc magnesium alloy was obtained by adding proper Ce-rich misch metals into high zinc ZA155 magnesium alloy under conventional condition.
主营产品有汽车刹车间隙自动调整臂(获得国家实用新型专利)、第三代轿车轮毂轴承单元、镁合金成型产品、铁膜覆砂铸造、车载pc等。
Our main products include Auto slack adjusters (patent technology), 3g wheel hubs, magnesium alloy die-casting parts, Sand-Coated die casting, mobile PC system etc.
主营产品有汽车刹车间隙自动调整臂(获得国家实用新型专利)、第三代轿车轮毂轴承单元、镁合金成型产品、铁膜覆砂铸造、车载pc等。
Our main products include Auto slack adjusters (patent technology), 3g wheel hubs, magnesium alloy die-casting parts, Sand-Coated die casting, mobile PC system etc.
应用推荐