再结晶织构的强度趋于一致。
变形织构主要源自变形前的初始织构。
The deformation texture came mainly from initial texture before compression.
ODF分析是现代织构材料分析的最有效手段。
ODF analysis is the most effective method for modern texture material analysis.
药芯罩材料的织构对其穿透深度具有很大影响。
Texture of metal cone materials produces a great impact for the depth ofpenetration.
在液晶态可以观察到近晶相和向列相的典型织构。
The typical smectic phase and nematic phase texture can be observed.
在液晶态可以观察到向列相的丝状织构和纹影织构。
The threaded texture and schlieren texture of nematic phase can be observed.
研究了不同的甲烷浓度对金刚石织构变化趋势的影响。
The tendency of diamond texture change was studied on the condition of various methane concentration.
尝试了小形变量轧制对立方织构电工钢织构形成的影响。
Effects of temper rolling on the cubic texture formation in primary recrystallized electrical steel were investigated.
XRD数据显示ECAP加工增加了织构并使衍射峰变宽。
XRD data indicate that this ECAP processing causes the XRD peaks to broaden.
考察了脉冲峰值电流密度对纳米晶镍镀层织构和硬度的影响。
The effects of pulse peak current density on the texture and hardness of electrodeposited Ni were investigated.
板带的最终组织中含有残留的热轧织构，织构组分较杂且弱。
The retained hot rolling structure and weak texture in final strip product are observed.
介绍了采用电子背散射衍射测定深冲用再结晶铌板织构的结果。
Textures in deep punching niobium sheets have been examined by the EBSD technology in the present paper.
主要研究基带厚度对其立方织构、晶界角分布以及晶粒尺寸的影响。
The influence of the substrate thickness on cube texture, misorientation Angle and average grain size was studied.
讨论了钢板的织构类型及其均匀性对硅钢电磁性能及冲压性能的影响。
The influences of texture typos and their homogeneity on the properties of magnetic and press were discussed.
这些再结晶织构与冷轧织构之间存在与某些重合点阵关系相近的位向关系。
Orientation relationships between the annealing textures and the rolling textures were found to be close to some coincidence lattice relationships.
然后用高斯分布函数作为取向分布函数模拟了弹性常数随织构的变化情况。
Then, Gaussian distribution function was adopted as orientation distribution function to simulate the variety of the elastic constants with the texture.
本文介绍显微组织，合金成分，热处理和织构等对钛合金断裂韧性的影响。
The influence of microstructure, chemical composition, heat treatment and texture in titanium alloys has been reviewed in this article.
在受到切应力作用后，液晶溶液形成条带织构，条带的方向与应力方向垂直。
The band-like texture is formed in the liquid crystalline solution after shearing and the band direction is perpendicular to the shearing direction.
并用示差扫描量热分析和偏光显微镜进行表征，确定其相变温度和液晶织构。
Its liquid crystalline phases were studied using differential scanning calorimeter (DSC) and a polarizing microscope with a hot stage.
低分辨织构分析指用有限的织构函数值或少量的织构系数进行织构分析的方法。
Using limited values of the texture function or a few of its coefficients to carry out texture analysis is the so called low resolution texture analysis.
共混物的织构形态除与织构调节剂、组分比有关外，还与尼龙的结构有很大关系。
Results show that the morphology relates to not only texture regulator and composition of the blends, but also to the structure of polyamide.
对连续退火或罩式退火后的深冲钢板和超深冲钢板的组织以及织构进行了观测和分析。
The structure and texture of continuous or batch annealing deep drawing and extra-deep drawing steel sheets were observed and analyzed.
射线衍射分析：材料结构的微观分析，如物相定性、定量分析，应力测试，织构分析等。
X-ray diffraction analysis: analyzing the microstructure of materials, such as phase qualitative, quantitative analysis, stress testing and structural analysis.
采用电化学及X射线衍射法研究了硫脲在铜电极表面的吸附作用及其对铜沉积织构的影响。
Adsorption of thiourea on the copper electrode surface and the effects of thiourea on the cathode electrodeposition were studied by electrochemical method and X ray diffraction.
应用取向分布函数(odf)研究和分析了3104铝合金经不同工艺退火后的再结晶织构。
The recrystallization textures after different annealing processes of 3104 aluminium alloy had been investigated by means of orientation distribution functions (ODFs).
研究了悬浮于永磁圈之上的熔融织构(MTG)高温超导球所受到的悬浮力的静态和动态性质。
The static and dynamic property of magnetic levitation force of melt texture growth (MTG) high temperature superconducting ball levitated above a permanent magnetic ring is investigated.
织构不仅对应力阈值有影响，而且也影响B值，因此控制织构仍可以制约氢化物发生应力再取向。
The threshold stress is affected by both the texture and the value of B . So controlling texture could still restrict hydride reorientation under tensile stress.
应用取向分布函数(odf)研究了3104铝合金经不同温度固溶及时效处理后的冷轧织构组态。
The cold rolling textures of 3104 aluminium alloys after solution and aging were studied by means of orientation distribution functions (ODFs).
含有粗大的铁素体晶粒和残留的热轧织构，引起力学性能的各向异性，导致了抗拉强度和延伸率的降低。
Big ferrites and hot rolling texture are left behind in particle structures, Which leads the anisotropy of mechanics, so the tensile strength and elongation rate reduce.
含有粗大的铁素体晶粒和残留的热轧织构，引起力学性能的各向异性，导致了抗拉强度和延伸率的降低。
Big ferrites and hot rolling texture are left behind in particle structures, Which leads the anisotropy of mechanics, so the tensile strength and elongation rate reduce.
应用推荐