纬纱这一术语是来自机织工艺。
可选配abs纬纱制动装置。
纵长方向的纱线叫经纱，横向的叫纬纱。
In weaving, lengthwise yarns are called warp and crosswise yarns are called weft, or filling.
纬停机构的作用是在没有纬纱时使织机停车。
The function of a filling stop motion is to stop the loom when filling is not present.
纱线条干的不均匀有掩盖纬纱间距不匀的作用。
Yarn irregularities tend to mask variations in pick - spacing.
在引纬过程中，纬纱可能会断头，纬纱卷装会用。
During filling insertion a yarn can possibly break or the filling supply package might run out of yarn.
织物在印染过程中，纬纱歪斜或弯曲是不可避免的。
The skewness or bending of Weft yarn is unavoidable in finishing process of printing and dyeing.
片梭织机使用一个带有夹子的片梭将纬纱引过梭口。
The projectile loom USES a projectile with grippers to carry the yarn through the shed.
塑料纬纱管物理力学性能是其质量特性的重要指标。
Physical and mechanical properties of a plastic pirn are important indexes of its quality Characteristics.
（织品的）纬纱在纺织品中穿过纵向线的水平纱线；
The horizontal threads that cross the warp in weaving; weft.
经纱工卷取，纬纱式卷取，复合式卷取，组合式卷取。
认为在设计和生产过程中，纬纱捻度的选择较为重要。
The selection of twist for weft is much important in design and production.
最后，举例阐述了纬纱在打纬过程中，在织口处往复运动的经过。
Finally, an example is given to illustrate pick movement at cloth-fell during multiple beat-up operations.
光电整纬机是一种能够对织物纬纱变形自动检测和矫正的自动控制设备。
The Photoelectric Abb-Finishing Apparatus is an equipment which can automatically measure and straighten weft abb distortion.
在沿纬纱的飞行方向上，布置一系列的孔道，孔道上开有打纬时的脱纬槽。
A series of orifices, with slots to permit the removal of the filling at beat - up, can be placed along the filling axis.
斜纹组织中，经纱位于（或浮于）两根纬纱之上，然后位于一根纬纱之下。
The warp yarn goes over, or floats over, two filling yarns and under one in the 2/1 twill.
并采用平行四边形法，分析了经纬纱密度等织物参数对织物变形能力的影响。
The deformation capability affected by the fabric parameters such as warp and weft yarn density is also analyzed based on the parallelogram method.
由于有效的边撑作用限制了织口处纬纱的屈曲，织口处的经纱屈曲会相应增加。
Since effective templing prevents the Weft at the fell from crimping, it follows that the warp crimp at the fell must be correspondingly high.
AIT能模拟引纬过程，并且可以测试在引纬过程中纬纱的速度和速度的变化。
The AIT provides a simulation of the welt insertion and measures the speed and speed variation of the weft yarn as it is inserted.
在多数情况下是以均匀的纬纱间距为目的的，在这种情况下使用积极式卷取装置。
In most cases uniform pick - spacing is the objective, and we use a "positive" take -up motion.
将引入梭口的纬纱推向织口，其中的钢筘和走梭板有导梭的作用；（4）卷取机构。
Will be introduced into the weaving shed weft mouth, one of the reed , and take the shuttle plate to guide the role of shuttle; (4) take-up mechanism.
介绍了可以扩大被检纬纱种类和织造工艺要求的15级纬纱检测器灵敏度调节电路；
Moreover, we presented that the circuit can modulate the weft detector 's sensitivity of 15 grades, it can enlarge the scope of detected weft and improve technological level.
本文通过对喷气引纬过程中气流对纬纱作用力的分析，建立了纬纱运动的微分方程。
Through an analysis of the forces acting on a weft which is inserted by air-jet in a loom, a differential equation of weft flying movement is estabilislied.
如果卷纬完成之后，纬管纱并不马上使用，通常被送到纬纱室，纬纱室内的温湿度较高。
If the quills are not to be used immediately after winding, they are usually taken to a room to be conditioned with hot, humid air.
研究了原纱和织物上拆解下来的高中低支纬纱的诸如断裂强力、强度、伸长和断裂功等性能。
In gray yarn and unraveled weft yarn from fabric, yarn properties such as breaking force, tenacity, elongation and breaking work are studied with weft breaks of coarse, medium and fine count yarns.
剑杆仅仅是这样一个装置，它由金属或复合材料制成，在其头部有一个附件携带纬纱穿过梭口。
A rapier is merely a device made of metal or a composite material with an attachment on the end to carry the filling yarn through the shed.
花式组织，又称为装饰组织或复杂组织，是通过预先确定的经纬纱交织规律的变化而形成的。
Figure weaves, also identified as fancy weaves, decorative weaves, or complex weaves, are formed by predetermined changes in the interlacing of the warp and filling yarns.
本文在假设纬纱的抗扭刚度为有限值的基础上，建立了平纹织物在织口处组织单元的数学模型。
A plain weave weaving model at cloth-fell, where the torsional rigidity of pick is assumed to have a finite value, is developed.
纬纱张力系统是一个非线性、时变的系统，针对这一特点，采用模糊pid算法进行伺服控制。
Tension of warp system is time-variant and nonlinear system. According to characteristic of tension of warp system, Fuzzy-PID algorithm is adopted.
纬纱前端的速度低于后部的速度，纬纱会弯曲，这就要求喷气织机的梭口应大于有梭织机的梭口。
The front moves slower than the rear and the yarn buckles. The result is that usually the warp shed must be larger than that for a shuttle loom.
应用推荐