• 并采用一次成形的复合复位模结构,既保证了产品的质量,又提高了生产效率,同时降低了生产成本。

    The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.

    youdao

  • 球形挡头和锥形入口模结构较好。

    The structures of ball stopper and taper entry din are better.

    youdao

  • 给出了链轮传动自动脱螺纹注塑模结构。

    The structure of the injection mould with automatic thread demoulding by the chain gear transmission is given.

    youdao

  • 介绍了通风道栅门塑料产品的注射模结构。

    Introduced the injection mold structure of the plastic products of the air chute fence gate.

    youdao

  • 阐述了生产按键的注射模结构与工作过程。

    The injection mold structure and working process of manufacturing keystroke are stated.

    youdao

  • 介绍了多弯弯曲件冲模的凸模、凹模结构。

    The structure of the punch and die of a stamping die for a multi-bending component was presented.

    youdao

  • 详细介绍了注射模结构和热流道系统的设计。

    The design of the mould structure and hot runner system was introduced in detail.

    youdao

  • 实践证明,该压缩模结构合理,产品质量稳定。

    The practice shows that the compression_mould structure is reasonable and part quality is stable.

    youdao

  • 对透明塑料罩壳注射模结构,采用点浇口进料。

    For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.

    youdao

  • 分析了一种型芯较长的注射模结构及成型特点。

    The structure and shaping characters of injection mold with long core get analyzed.

    youdao

  • 介绍了注射模结构,浇口设计方案和模具工作过程。

    The structure of the injection mould, the design plan of the gate and the working course of the mould are introduced.

    youdao

  • 重点阐述了锥形套注射模结构中脱模机构的设计要点。

    Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.

    youdao

  • 模结构,利用该结构的构图方法,和制造液晶显示器的方法。

    Mold structure, patterning method using the same, and method of fabricating liquid crystal display device.

    youdao

  • 采用该方法设计的吸塑模结构紧凑,抽芯可靠,生产效率高。

    T he plastics suction mould by this design is impact in structure and reliable in core pulling, and has high production efficiency.

    youdao

  • 介绍了成形模具的设计技巧、成形模结构特点及设计关键要求。

    The designing techniques and structure characteristics of the die and the key requirements for the design of the die were stated.

    youdao

  • 喷油器体因形状所致,其挤压成形无法采用传统的整体凹模结构。

    The conventional structure of a entire concave die is not applicable for extrusion of fuel injector bodies because of shape of fuel injector bodies.

    youdao

  • 本文首先对注塑模结构CAD的重要性及尚存在的问题进行分析。

    The importance of the structure CAD of plastic injection mold and existing problems are reviewed first.

    youdao

  • 分析了锥面斜孔冲裁的工艺,介绍了一种新型的锥形件冲孔模结构。

    Piercing technology for oblique holes on conical surface was analyzed and a new piercing die structure for the conical part was introduced.

    youdao

  • 介绍了铝箔快餐盒拉伸模结构及压边的设计方案,此模结构较复杂。

    The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.

    youdao

  • 在模具结构设计方面,斜刃口模具可采用快速换模结构,以提高生产率。

    In designing of the die pattern, a high-speed die-changing structure can be applied to die with the inclination edge to raise the efficiency of blanking.

    youdao

  • 分析了笔尖和笔杆的结构特点与成型工艺,介绍了该类零件的注射模结构特点。

    Analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.

    youdao

  • 分析了塑件的工艺性,给出了实用的压模结构,论述了模具结构设计和工作过程。

    Based on the analysis of the technological characteristics of the moulded part, the practical die structure was presented, the structure design and working principle of the mould were discussed.

    youdao

  • 对硬质合金拉伸凹模结构及设计要点作了详细介绍,对同类型模具设计提供了参考。

    The structure and design points of hard alloy drawing combination concave die were introduced in detail and provided the reference to the similar die design.

    youdao

  • 然后,利用PDMS对所制作的SU-8微流沟道进行一次倒模,得到其负模结构;

    Then, the PDMS was used to cast firstly for the SU-8 microfluidic to obtain a PDMS negative mode structure.

    youdao

  • 冲裁侧刃是端子模具中的重要工序,其冲裁形状和凸、凹模结构对端子生产质量影响很大。

    Punching side blade is an important procedure of terminals die, its punching shape, concave die and convex die structure greatly impact the terminals on manufacture quality.

    youdao

  • 分析了凹模摆块机构的几何运动,设计了相应的弯曲模结构,可为类似零件的成形提供参考。

    The geometrical movement of the swaying block of the matrix is analyzed. The corresponding die structure has been designed. It can serve as a reference for forming similar parts.

    youdao

  • 分析了轴盖的冲压工艺性,对传统工艺进行了改进,介绍了其复合模和修边模结构及设计要点。

    The work process of the trimming die for vertically forming the thin-wall barrels of the shell top part of hot-water shower device was introduced.

    youdao

  • 介绍铝合金挤压型材平面分流组合模结构,系统地分析了平面分流组合模各结构要素及设计要求。

    The structures of plane distribution composite die are introduced. The design needs and structure factors of plane distribution composite die are analysed.

    youdao

  • 用一般的折弯模很难达到不擦伤表面,对此,提出了一种新的折弯模结构,并分析了其成形过程。

    It is so difficult to get non-scrape surface using ordinary bending die. Thus a new bending die structure is provided, and its forming process is analyzed as well.

    youdao

  • 提出新型切边模结构和刃口齿形设计计算公式,论述模具制造工艺、模块翻新和模具系列化方案。

    A new type of structure of the trimming dies and the formulae for designing the cutting edge of the dies are put forward, the manufacture process and the seriation of the dies are discussed.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定