球形挡头和锥形入口模结构较好。
The structures of ball stopper and taper entry din are better.
给出了链轮传动自动脱螺纹注塑模结构。
The structure of the injection mould with automatic thread demoulding by the chain gear transmission is given.
介绍了通风道栅门塑料产品的注射模结构。
Introduced the injection mold structure of the plastic products of the air chute fence gate.
介绍了多弯弯曲件冲模的凸模、凹模结构。
The structure of the punch and die of a stamping die for a multi-bending component was presented.
对透明塑料罩壳注射模结构，采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
分析了一种型芯较长的注射模结构及成型特点。
The structure and shaping characters of injection mold with long core get analyzed.
重点阐述了锥形套注射模结构中脱模机构的设计要点。
Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.
模结构，利用该结构的构图方法，和制造液晶显示器的方法。
Mold structure, patterning method using the same, and method of fabricating liquid crystal display device.
采用该方法设计的吸塑模结构紧凑，抽芯可靠，生产效率高。
T he plastics suction mould by this design is impact in structure and reliable in core pulling, and has high production efficiency.
最后达到了凹模结构的各个参数的优化设计，得到了预期的结果。
Finally, each optimized design parameter of the concave die structure had achieved, and obtained the anticipated result.
喷油器体因形状所致，其挤压成形无法采用传统的整体凹模结构。
The conventional structure of a entire concave die is not applicable for extrusion of fuel injector bodies because of shape of fuel injector bodies.
随着场模结构参量的增大，熵压缩的演化周期缩短，压缩时间延长；
The influences of the atomic motion and the field mode structure on the atomic entropy squeezing are discussed.
分析了锥面斜孔冲裁的工艺，介绍了一种新型的锥形件冲孔模结构。
Piercing technology for oblique holes on conical surface was analyzed and a new piercing die structure for the conical part was introduced.
介绍了铝箔快餐盒拉伸模结构及压边的设计方案，此模结构较复杂。
The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.
计算并绘出了非稳区域边界，分析了非稳振荡波形变化规律及其模结构。
The regularity of the change of the unstable oscillation wave form and the structure of the power spectrum were analysed.
在模具结构设计方面，斜刃口模具可采用快速换模结构，以提高生产率。
In designing of the die pattern, a high-speed die-changing structure can be applied to die with the inclination edge to raise the efficiency of blanking.
通过对U形件侧面冲孔工艺的分析，介绍了U形件冲孔、压字复合模结构。
On the basis of technology analysis for the U shape pierced side holes, this paper introduced the struture of compound dies for U shape stamped and pressed-word.
介绍了外壳注射模结构，阐述了流道系统、抽芯结构以及滑块的确定方法。
The injection mold structure of outer shell is introduced, whilst, flow system and the deciding method of pulling-core structure and slider are stated respectively.
分析了笔尖和笔杆的结构特点与成型工艺，介绍了该类零件的注射模结构特点。
Analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.
有时候用摇摆凸模结构来代替滑块结构，本文主要介绍了摇摆凸模的设计制造。
In this paper, mainly introduced the design and manufacturing of the swingwing punch.
分析了塑件的工艺性，给出了实用的压模结构，论述了模具结构设计和工作过程。
Based on the analysis of the technological characteristics of the moulded part, the practical die structure was presented, the structure design and working principle of the mould were discussed.
对硬质合金拉伸凹模结构及设计要点作了详细介绍，对同类型模具设计提供了参考。
The structure and design points of hard alloy drawing combination concave die were introduced in detail and provided the reference to the similar die design.
论述了用在通用冲床上的引出脚弯曲挤扁切断自动模结构形式、工作原理和设计要点。
A description is made on a structure operating principle and main points of the design of auto-feed progressive die of bending extruding flat and cutting for the leading foots.
介绍了几种连接盘塑件共用一套模架的快换注塑模结构及该模具设计中应注意的问题。
The structure of a rapid-shifting injection mould with a frame Shared by several connection tray work pieces and some remarkable essentials in the design are introduced.
从传统的思维模式无法解释分流模结构的角度出发，去探询型材的挤压成型和模具设计。
Extrusion forming and die designing of profiles are discussed in view of the structure of distribution die which can not be explained by traditional thinking mode.
分析了打印机导纸器塑件工艺特点，介绍了注塑模结构、浇口设计方案和模具工作过程。
It analyzed the technological characteristics of plastics article of leading paper device of printer, and introduced the structure of injection mould, the gate design, and the work process of mould.
通过对饮水杯盖产品结构和注射成型的工艺分析，确定了该塑件的注射模结构为一模两腔。
Through study on the structure of children potable water cup and existed technology problems in injection forming, an injection mould with one module and two cavities were determined.
冲裁侧刃是端子模具中的重要工序，其冲裁形状和凸、凹模结构对端子生产质量影响很大。
Punching side blade is an important procedure of terminals die, its punching shape, concave die and convex die structure greatly impact the terminals on manufacture quality.
介绍铝合金挤压型材平面分流组合模结构，系统地分析了平面分流组合模各结构要素及设计要求。
The structures of plane distribution composite die are introduced. The design needs and structure factors of plane distribution composite die are analysed.
介绍了医用一次性塑料镊子的成型工艺及注射模结构，模具试模一次成功，成型塑件满足用户要。
The forming process for the medical one_off plastic tweezers and the structure of the injection mould were introduced.
应用推荐