• 去年10月,成功地轧出了第一批低合金槽钢。

    Last October the first batch of low-alloy channel steel was successfully rolled.

    《新英汉大辞典》

  • 槽钢是一种经济断面型材,广泛应用于汽车、航空、轻工、机械制造以及建筑等各个行业。

    Channel section steel is a kind of economic cross section steel, the products are widely used in automobile, aviation, light industry, machinery manufacture and construction areas.

    youdao

  • 本文研究的重点是槽钢剪力连接件。

    The research emphasis of this paper is on channel shear connectors.

    youdao

  • 牵引机构由连接支架和槽钢架组成;

    The traction mechanism is composed of a connection support frame and a channel steel frame;

    youdao

  • 吊笼由角钢和槽钢焊接而成。

    The suspension coop is welded by the Angle steel and channel steel.

    youdao

  • 该机底座采用槽钢,机体采用钢板焊接而成。

    The machine USES the base channel, and the body with steel plates welded together.

    youdao

  • 该机底座采用槽钢,机体采用钢板焊接而成。

    The base of the machine adopts a channel steel and the body adopts welded steel plate.

    youdao

  • 安装主要材料:各种型号的槽钢、角铁及铁板。

    Main mate rial for installing: all kinds of channel steel Angle iron and plate iron.

    youdao

  • 安装主要材料:各种型号的槽钢、角铁及铁板。

    Main material for installing: all kinds of channel steel, Angle iron and plate iron.

    youdao

  • 基础槽钢的水平度、平直度应满足设计和规范要求。

    The levelness and straightness of the foundation channel steel should accord with the design and specifications.

    youdao

  • 机架采用槽钢作为主梁,中间加加强筋板焊接而成。

    The rack USES the channel steel to take the main body, the middle with stiffener board welded together.

    youdao

  • 底座由钢板与槽钢焊成,用于支撑壳体及传动装置。

    Base from steel plate and welded into a channel for supporting the shell and gear.

    youdao

  • 机架:板型槽钢与钢板焊接而成。表面油漆颜色为绿色。

    Frame: plate type channel steel welded with green paint color. Surface.

    youdao

  • 弯制各类钢管,槽钢,扁钢,角钢,工字钢,钢轨等型钢。

    Bending all kinds of steel pipe, channel steel, flat steel, Angle, I-beam, such as steel rails.

    youdao

  • 介绍一种考虑薄壁槽钢受压局部屈曲后强度的有效宽厚比法。

    Introducing the method of effective ratio of width to thickness by considering post buckling strength of channel sections in press.

    youdao

  • 以冷弯型钢中的槽钢为例,分析了其辊弯成型的特点及变形规律。

    Based on the cold roll forming steel, its characteristic of roll-forming and deforming rule was analyzed.

    youdao

  • 型钢选用工字钢、角钢或槽钢,或者采用钢板焊接为“十”字型截面。

    The bar steels adopt I steels, Angle steels or channel steels, or adopt steel plates which are welded into a cross shaped section.

    youdao

  • 介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数。

    This paper introduces the producing and technology characteristics of the square and rectangular double-welded seam pipe. And designing of the pass parameters of the cold-bent channel steel.

    youdao

  • 该项技术应用于轻型槽钢的轧制时,技术上的优越性更加充分地显露出来。

    When applied on rolling light channel steel the superiority in technique is more obvious.

    youdao

  • 底板是以槽钢焊接成框架,钢板为面板的平板结构,其尺寸与模框相对应。

    Channel bottom is welded into the frame, steel structure for the flat panel, and its size corresponds with the mold box.

    youdao

  • 介绍了等边槽钢冷轧过程中的技术特点及其轧制条件,以及轧辊的设计参数。

    It introduces the technical traits and cool rolling conditions of equal canal steel cool rolling process, and the roller designing parameter.

    youdao

  • 研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。

    Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.

    youdao

  • 本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性,定位方式及受力分析。

    This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.

    youdao

  • 二十世纪初期制造商们就已用钢管、角铁以及槽钢之类的材料建造温室的上部结构。

    Manufacturers of the early 1900s were using steel pipe, angle or channel for the greenhouse superstructures.

    youdao

  • 机身为槽钢机架,主机配有低中心齿轮减速机,具有传动平稳,扭矩大,维修方便之优点。

    The machine body is U-steel frame, and the main machine is collocated with low-center gear decelerator, with advantages of stable transmission, large torque, and convenient repair.

    youdao

  • 本文以槽钢为主要研究对象,假定材料为理想弹塑性体,在ANSYS中建立其有限元模型。

    The main study object of the paper is channel steel whose finite element models are founded in ANSYS the material is assumed as elastic-plastic body.

    youdao

  • 系列数值分析表明影响槽钢腹板压屈的主要参数是腹板的厚度、屈服强度、槽钢的内角半径。

    The numerical calculating results agreed well with the test data. The parameters affecting the web crippling capacity are researched through a series of numerical test specimens.

    youdao

  • 本发明公开了一种轻钢龙骨,成槽钢或工字钢结构,轻钢龙骨(12)上开设有预留口(22)。

    The invention discloses a light steel stud, which takes the structure of a channel beam or an I beam, and a preformed opening (22) is arranged on the light steel stud (12).

    youdao

  • 热轧槽钢、钢板螺栓组连接的工程实例计算表明:结合部非局部弹性介质弹性参数皆为时变参数;

    Calculation of bolt group connection between hot-rolling channelbar and armor plate shows that nonlocal elastic medium's elastic parameters for joint interface are all time-varying.

    youdao

  • 热轧槽钢、钢板螺栓组连接的工程实例计算表明:结合部非局部弹性介质弹性参数皆为时变参数;

    Calculation of bolt group connection between hot-rolling channelbar and armor plate shows that nonlocal elastic medium's elastic parameters for joint interface are all time-varying.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定