• 去年10月,成功地轧出了第一批低合金槽钢。

    Last October the first batch of low-alloy channel steel was successfully rolled.

    《新英汉大辞典》

  • 槽钢是一种经济断面型材,广泛应用于汽车、航空、轻工、机械制造以及建筑等各个行业。

    Channel section steel is a kind of economic cross section steel, the products are widely used in automobile, aviation, light industry, machinery manufacture and construction areas.

    youdao

  • 该机底座采用槽钢,机体采用钢板焊接而成。

    The base of the machine adopts a channel steel and the body adopts welded steel plate.

    youdao

  • 基础槽钢的水平度、平直度应满足设计和规范要求。

    The levelness and straightness of the foundation channel steel should accord with the design and specifications.

    youdao

  • 机架采用槽钢作为主梁,中间加加强筋板焊接而成。

    The rack USES the channel steel to take the main body, the middle with stiffener board welded together.

    youdao

  • 弯制各类钢管,槽钢,扁钢,角钢,工字钢,钢轨等型钢。

    Bending all kinds of steel pipe, channel steel, flat steel, Angle, I-beam, such as steel rails.

    youdao

  • 介绍一种考虑薄壁槽钢受压局部屈曲后强度的有效宽厚比法。

    Introducing the method of effective ratio of width to thickness by considering post buckling strength of channel sections in press.

    youdao

  • 以冷弯型钢中的槽钢为例,分析了其辊弯成型的特点及变形规律。

    Based on the cold roll forming steel, its characteristic of roll-forming and deforming rule was analyzed.

    youdao

  • 型钢选用工字钢、角钢或槽钢,或者采用钢板焊接为“十”字型截面。

    The bar steels adopt I steels, Angle steels or channel steels, or adopt steel plates which are welded into a cross shaped section.

    youdao

  • 介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数。

    This paper introduces the producing and technology characteristics of the square and rectangular double-welded seam pipe. And designing of the pass parameters of the cold-bent channel steel.

    youdao

  • 底板是以槽钢焊接成框架,钢板为面板的平板结构,其尺寸与模框相对应。

    Channel bottom is welded into the frame, steel structure for the flat panel, and its size corresponds with the mold box.

    youdao

  • 介绍了等边槽钢冷轧过程中的技术特点及其轧制条件,以及轧辊的设计参数。

    It introduces the technical traits and cool rolling conditions of equal canal steel cool rolling process, and the roller designing parameter.

    youdao

  • 研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。

    Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.

    youdao

  • 本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性,定位方式及受力分析。

    This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.

    youdao

  • 二十世纪初期制造商们就已用钢管、角铁以及槽钢之类的材料建造温室的上部结构。

    Manufacturers of the early 1900s were using steel pipe, angle or channel for the greenhouse superstructures.

    youdao

  • 机身为槽钢机架,主机配有低中心齿轮减速机,具有传动平稳,扭矩大,维修方便之优点。

    The machine body is U-steel frame, and the main machine is collocated with low-center gear decelerator, with advantages of stable transmission, large torque, and convenient repair.

    youdao

  • 本文以槽钢为主要研究对象,假定材料为理想弹塑性体,在ANSYS中建立其有限元模型。

    The main study object of the paper is channel steel whose finite element models are founded in ANSYS the material is assumed as elastic-plastic body.

    youdao

  • 系列数值分析表明影响槽钢腹板压屈的主要参数是腹板的厚度、屈服强度、槽钢的内角半径。

    The numerical calculating results agreed well with the test data. The parameters affecting the web crippling capacity are researched through a series of numerical test specimens.

    youdao

  • 本发明公开了一种轻钢龙骨,成槽钢或工字钢结构,轻钢龙骨(12)上开设有预留口(22)。

    The invention discloses a light steel stud, which takes the structure of a channel beam or an I beam, and a preformed opening (22) is arranged on the light steel stud (12).

    youdao

  • 热轧槽钢、钢板螺栓组连接的工程实例计算表明:结合部非局部弹性介质弹性参数皆为时变参数;

    Calculation of bolt group connection between hot-rolling channelbar and armor plate shows that nonlocal elastic medium's elastic parameters for joint interface are all time-varying.

    youdao

  • 畸变屈曲作为控制冷弯薄壁卷边槽钢柱承载力的重要模式之一,正逐步受到国内外研究人员的重视。

    As one of the strength-governing modes for cold-formed channel columns, distortional buckling is receiving more attentions.

    youdao

  • 以槽钢辊式冷弯成型理论分析为基础,论述了槽钢辊式冷弯成型的孔型构成及孔型尺寸的确定方法。

    This paper based on the theory of Cold Roll Forming for groove steel, discuss the methods for confirming the figures and the dimension for groove steel.

    youdao

  • 将土层锚杆直接锚定在强度相对较低的“薄型”搅拌极墙上,锚下用槽钢作为受压铁件与搅拌极相接触。

    The anchor rod is anchored directly on the agitation pile wall of "thin type" with relatively low strength and channel bar is used under the anchor to contact with the agitation pile.

    youdao

  • 介绍了Q 2 35—d槽钢的研制开发情况。通过微合金化处理,试制产品达到了生产铁路豪华客车的要求。

    The development of the Q235-D channel steel is described. Through the micro alloying processing, the prototype products have met the requirements to manufacture luxurious railway passenger cars.

    youdao

  • 主要生产、经营各种型号的螺纹钢、角钢、槽钢等20多个品种,并获得国家颁发的《全国工业产品生产许可证》。

    The main production and operation of various types of steel, Angle steel, channel steel, such as more than 20 varieties, and awarded the country a "national industrial products production license."

    youdao

  • 结果表明,该工艺可缩短修复时间、提高生产效率、降低修复成本,为类似铝电解槽钢壳修复工艺的制定提供依据。

    The results show that the repairing process can decrease the repairing time, increase productivity and reduce the repairing cost. The conclusion can provide base for repairing such similar parts.

    youdao

  • 因此,对厚壁双冷弯槽钢焊接组合截面构件而言,确定其稳定承载力时应考虑焊接残余应力和冷弯残余应力的共同影响。

    So for thick-walled double channels with welding composite section, the combined effects of the cold-formed and welding residual stresses shall be considered to assure the stability bearing capacity.

    youdao

  • 本文对无支撑、钢带支撑、槽钢支撑和十字交叉钢带支撑的C型截面柱的墙柱骨架进行了在轴心压力作用下的足尺试验。

    The full-scale tests are carried out in this research for the wall-stud structures with C-type cross section stud which subject to centric axial loads.

    youdao

  • 当其他公司只提供作为另加选择时,美国旋风的真空泵的标准规格已包括有下列的重要配件-高品质入口过滤芯,高级的排气消音装置,抽吸软管和工业级槽钢底架。

    These vacuum pumps come standard with many important features that others offer as options - quality inlet filter, premium exhaust silencers, suction hose and industrial strength channel iron frame.

    youdao

  • 当其他公司只提供作为另加选择时,美国旋风的真空泵的标准规格已包括有下列的重要配件-高品质入口过滤芯,高级的排气消音装置,抽吸软管和工业级槽钢底架。

    These vacuum pumps come standard with many important features that others offer as options - quality inlet filter, premium exhaust silencers, suction hose and industrial strength channel iron frame.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定