• 集中力作用下钢筋砼板的承载力取决于板的抗弯强度与冲切强度。

    The carrying capacity of a reinforced concrete slab under concentrated load depends on its bending strength and punching strength.

    youdao

  • 并通过实际应用,证实了激光表面强化处理具有使硬质合金制品的抗弯强度、耐磨性能大为提高的显著效果。

    Practice shows that the laser treatment of hard metals surface can significantly increase the product's bending strength and wear resistance.

    youdao

  • 计算抗弯强度的平均值和标准差。

    Mean strengths and standard deviations were determined.

    youdao

  • 探讨了核化温度与抗弯强度之间的关系。

    The relationship between nucleation temperature and flexural strength was investigated.

    youdao

  • 此外,还对抗弯强度试样的断口进行了分析。

    Additionally, the fracture surfaces of bending strength specimen were also explained.

    youdao

  • 抗弯强度是水泥刨花板的主要力学性能指标。

    Bending strength is the main mechanical performance index for cemented chipboard.

    youdao

  • 随着温度降低,玻璃板的抗弯强度测定值增加。

    It is found that the bending strength of gauge glass increases when the temperature decreases.

    youdao

  • 复合盐芯的抗弯强度随增强体含量增加而增加。

    The bending strength of composite salt cores increased with the content of reinforcement increasment.

    youdao

  • 抗弯强度和抗冲击强度是普通玻璃的四倍以上。

    Bending strength and shock strength are four times higher than common glass.

    youdao

  • 研究了八种不同陶瓷试样的抗弯强度和韦布尔模数。

    Bending Strength and Weibull modulus of eight kinds of ceramics samples were studied.

    youdao

  • 系统研究了合成莫来石烧结工艺对其抗弯强度的影响。

    The effect of sintering technology of mullite on its bending strength was studied systematically.

    youdao

  • 测定了密度、硬度、抗弯强度、断裂韧性等性能指标。

    Their density, hardness, flexural strength and fracture toughness were measured.

    youdao

  • 为了评价焊接强度,还进行了抗弯强度(扭矩)测试。

    Bending (torque) test was also performed to evaluate strength of the brazed joints.

    youdao

  • 含木率之增加降低了抗弯强度及抗弯弹性率至为显著。

    Flexural strength and elasticity decreased significantly with increasing wood content.

    youdao

  • 随着骨料粒度的增大,材料气孔率降低,抗弯强度降低;

    The porosity and flexural strength of the material decrease with the rising of the aggregate particle size;

    youdao

  • 本实用新型构造简单,中间手柄抗弯强度大,安全性能好。

    The utility model has the advantages of simple structure, large anti-bending strength of the handle in the middle of the probe and favorable safety.

    youdao

  • 结果表明:低压烧结工艺可以有效提高硬质合金的抗弯强度;

    Results showed that sinter-HIP treatment can enhance the transverse rupture strength of WC-Co cemented carbides effectively.

    youdao

  • 结论:丙酮化学处理树脂断面可提高义齿基托修理后的抗弯强度。

    Conclusions: Treating the fractured surface of the acrylic resin denture base chemically with acetone can improve the repair strength efficiently.

    youdao

  • 对热压烧结后材料的硬度、断裂韧性和抗弯强度进行了测试和分析;

    The hardness, the fracture toughness and the bending strength of the composites were tested.

    youdao

  • 另外,发现分形维数与抗弯弹性模量、抗弯强度之间存在正相关趋势。

    In addition, there is positive correlation between fractal dimension and bending strength, bending elastic modulus.

    youdao

  • 研究了烧结温度和莫来石含量对复合材料的介电性能和抗弯强度的影响。

    The effect of the sintering temperature and the mullite content on the dielectric properties and the bending strength has been studied.

    youdao

  • 对脆性陶瓷材料来说,抗弯强度即为横向弯曲试验中样品断裂时的应力。

    For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.

    youdao

  • 结果表明:孔隙度与石墨含量呈线性关系,抗弯强度与孔隙度呈指数关系。

    The results show that porosity is a linear function of graphite content and that bending strength is an exponential function of porosity.

    youdao

  • 结果表明,磨削工艺所引入的残余应力是拉应力,显著降低陶瓷抗弯强度。

    As a result, in this study, the residual stresses introduced by grinding process were tensile and had a significant effect on reducing the bending strength.

    youdao

  • 还表明,在一定温度下,载荷-挠度曲线越陡,合金的抗弯强度一般也越高。

    It was also found that at a fixed temperature the transverse-rupture strength of the alloy generally increased with the steepness of load-deflection curves.

    youdao

  • 测试了真空烧结和低压烧结试样的抗弯强度、洛氏硬度、磁饱和度和矫顽磁力。

    Transverse rupture strength, Rockwell a hardness, magnetic saturation induction and magnetic coercivity of samples sintered in vacuum or by sinter-HIP were measured.

    youdao

  • 随w含量的增加,复合材料弹性模量、抗弯强度和断裂韧性增大,而硬度减小。

    With W content increasing, the elastic module, flexural strength and fracture toughness increase, but the Vickers 'hardness decreases.

    youdao

  • 研究了烧结坯的密度、抗弯强度、晶粒度与掺碳量、烧结温度、保温时间的关系。

    The relationships between the density, bending strength and grain size of the sintered compact and the quantity of additives, sintering temperature, sintering time were investigated .

    youdao

  • 结果表明,激光熔凝处理后获得超细化的枝品组织,其抗弯强度和耐磨性显著提高。

    The experimental results show that super-refined microstructure is formed in the remelting layer. The bending strength and wear resistance are enhanced evidently.

    youdao

  • 并对汽车把手件气辅成型制品和传统注塑成型制品的抗拉强度和抗弯强度进行了比较。

    The tensile strength and bending strength of gas-assisted molding automobile handle were compared with conventional injection molding.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定