该方案对微梁多阵列传感器研制开发提出了一个新的思路。
This method provided a simple way to design micro-cantilever array based on optical lever in the future.
利用解析方法分析了基座变形对微梁共振器固有频率的影响。
The effect of base structural deformation on inherent frequency of a microbeam resonator is analyzed by using analytical method.
此时细胞核偏向一边，但细胞的其余部位仍充满了胞质微梁骨架。
At this time the nucleus moved aside from center of the PMC, but the rest of the cell was still fulfilled with MN filaments.
研究了在微梁谐振器结构中，梁作高阶振动时挤压气体薄膜的阻尼效应。
The squeeze film damping effects on beam shaped micro resonator was studied.
研究微机电系统(MEMS)中微梁结构在非线性电场力下的振动问题。
Vibration of a micro beam structure under the nonlinear electric field force in MEMS is studied.
第二章详细论述了一种新型的微梁直拉直压硅微机械压阻式加速度传感器的工作原理。
In Chapter 2, the operation scheme of a micromachined piezoresistive accelerometer with axially deformed tiny beams is studied in details.
为了保证非线性代数方程组求解的收敛性和稳定性，该文根据微梁的受力特点提出了一种增量迭代的算法。
In order to guarantee the convergence and stability in solving nonlinear algebraic equations, an incremental iterative algorithm was put forward according to the load characteristic.
结果发现，花粉母细胞核内存在粗细不等的微梁骨架，与核仁和染色体紧密相连，随着发育的推移，其均一性发生改变。
The nucleolus and chromosomes were connected with the MN filament network. The uniformity of nuclear MN changed with the development of the PMCs.
最后应用微散斑干涉，检测粘附平衡态时微桥和微梁的粘附力以及由毛细粘附所导致的弯曲变形，并与理论计算结果进行比较。
Micro speckle interferometry is employed to detect the deformation of the micro beam in the equilibrium and the experimental results are compared with the theoretical prediction.
在弯曲测试实验中，通过标定测试用AFM微悬臂梁的有效长度，从而修正了其弹簧常数。
In bending test, the spring constant of AFM micro cantilever is corrected through the calibration of its effective length.
本文研制的体硅工艺微振动传感器，其敏感单元为叉指电极结构，弹性梁采用新颖的多级折梁结构。
The sensing element of the bulk machining vibration sensors is consisted of comb electrodes, and its elastic beams are novel multi-folding beams.
本文的研究重点是压电双晶梁微驱动器和无阀压电微泵。
In this dissertation, only the piezoelectric bimorph micro-actuator and valveless piezoelectric micro pump are introduced.
开关的微驱动部分由导磁的悬梁、扭梁和线圈、永磁体组成。
The microactuated part consists of cantilever, torsional girder, planar coils and permanent magnets.
以超高密度信息存储技术为应用背景，设计了低刚度高谐振频率的新型微压电悬臂梁探针，并安排了探针加工工艺流程。
Based on the applications in ultra-high-density data storage, a novel micro piezoelectric cantilever is designed, and the probe fabrication process arrangement is made as well.
介绍了微电镀原理和设计了微电镀平台，设计了悬臂梁的微电镀工艺流程。
The fabricating process of the beam was designed after the micro -electroplating principle and the micro -electroplating plat form were introduced.
江津观音岩长江大桥为结合梁桥，为防止桥面板湿接缝在约束条件下产生裂缝，该桥面板湿接缝要求采用微膨胀混凝土，以补偿混凝土的收缩、徐变。
In order to prevent the cracks that would be likely caused by restricted conditions of the wet-joint, the wet-joint demands using expansive concrete to compensate the shrinkage and creep.
设计了一种硅微悬臂梁结构，在低频环境中以压电厚膜进行信号转换、谐振。
A silicon micro cantilever structure with piezoeLectric thick film was designed for low frequency operations.
高分子薄膜的微力学悬臂梁感应器研究。
Thin polymer films investigated by micromechanical cantilever sensors.
微悬臂梁是一种结构简单、易于进行微加工以及大量生产的传感器结构。
Microcatilever is a kind of simple sensor configuration that is easily micromachined and mass produced.
采用基于应变梯度理论的假设应变有限元方法研究了微尺度梁弯曲的尺寸效应。
An assumed strain finite element method based on the theory of strain gradient was proposed to explore the size effect that frequently exhibited in micro-beam bending.
将微悬臂梁和微薄膜振动特性的测量结果与频率扫描法的测试结果进行了比对，对产生的误差及误差来源进行了分析。
The testing error and the reason of error are analyzed, compared with the results received by the sweep-frequency measurement method.
针对成型电极在微细加工中暴露出的缺点，提出了利用旋转微细电极像微铣刀一样进行微细电解铣削新工艺，加工出高精度型孔和悬臂梁等微结构。
The new process of electrochemical milling by rotating microelectrode like micro milling-(cutter) was proposed, and micro profiled hole and micro beam with high precision can be milled.
第三章给出了等截面悬臂梁微开关的微机械加工工艺，设计了掩膜版及具体的工艺参数。
Chapter three: Presents the fabrication process of micro-switch with cantilever beam and designed the masks.
为了验证微挠度桥梁实现的可能性，作者设计微挠度简支梁模型并实现了上述的控制思路。
To illustrate the idea of such a smart prestressing system, a model with the self-adapted function is designed and tested, in which the simply supported girder bridge is applied.
此红外探测仪的核心器件焦平面阵列（FPA）由无硅基底结构的微悬臂梁阵列构成。
The IR detector contains a focus plane array (FPA) which is fabricated into an array of bi-material microcantilevers in the form of single-layer membranous structure without Si-base.
为此，以矩形压电微悬臂梁结构作为换能单元，通过对压电层等效电流源和单相桥式整流电路的理论及相关公式的推导，得出微能量功率的计算公式。
An energy harvesting structure based on rectangle piezoelectric microcantilever was set up and the process of energy transform from vibration to electric was generally analyzed.
运用该方法在研究微悬臂梁的弯曲形变过程中，必须考虑压头在微悬臂梁上的压入以及微悬臂沿宽度方向的挠曲。
The method was described clearly. In the deflection of microbeams, the influence of the indenter tip pushing into the top of the microbeams and the curvature across its width must be considered.
采用微细加工技术制作出无基底的双材料微悬臂梁阵列结构。
The micro-electromechanical system (MEMS) technology is adopted to fabricate the substrate-free bi-material micro-cantilever arrays.
利用梯度功能压电执行器设计和制作了双悬臂梁结构的微夹钳，用作微型机器人操作系统的操作手。
A pair of functionally gradient piezoelectric cantilevers was used to fabricate a microgripper, which is used as the micromanipulator of micro robot operating system.
利用梯度功能压电执行器设计和制作了双悬臂梁结构的微夹钳，用作微型机器人操作系统的操作手。
A pair of functionally gradient piezoelectric cantilevers was used to fabricate a microgripper, which is used as the micromanipulator of micro robot operating system.
应用推荐