利用液相克劳斯反应直接从烟气脱硫过程回收硫磺。
Sulfur was direct recovered in flue gas desulfurization process by liquid-phase Claus reaction.
铅酸蓄电池：用来帮助发动轿车和卡车的可回收电池是由铅板和包在塑料包里的硫磺酸组成的。
LEADACID batteries: These rechargeable batteries that help start most cars and trucks are composed of lead plates and sulfuric acid in a plastic case.
硫磺回收装置的设备需要有较大的操作弹性。
The equipment for sulfur recovery requires a wide operating range.
对硫磺回收这类有自产蒸汽且蒸汽又难有别的利用途径的装置，采用蒸汽夹套伴热是合理的。
However, it is reasonable to adopt steam jacket heat tracing for sulfur recovery unit, as the steam produced by the unit itself has no other utilization.
总结了LS- 971脱氧保护型硫磺回收催化剂的制备、表征及活性评价情况。
The preparation, characterization and activity evaluation of LS-971 deoxygenation protection catalyst for sulfur recovery were introduced.
本文结合克劳斯硫磺回收工艺过程，对过程气换热器壳程结构上采取的特殊作法进行了讨论。
This paper discusses some specific practices to shell structure of process stream heat exchanger on the basis of Claus sulfur recovery process.
正常生产情况下的主要恶臭污染源为碱渣处理装置、酸性水汽提装置、氨精制装置、硫磺回收装置和污水处理场。
Under normal conditions, the major odor pollutants come from alkali waste treatment unit, sour water stripping unit, ammonia refining unit, sulfur recovery unit as well as waste water treatment site.
分析了硫磺回收催化剂活性衰退的原因及防止措施。
Sulfur recycle catalyst activeness decline reason and its preventive measures are analyzed.
本文阐述以浙大中控JX-300DCS为平台，采用比值、串级和超弛控制等复杂控制方案，实现了对硫磺回收装置的自动控制。
Based on the JX-300DCS, we used the complicated control schemes such as proportional control, cascade control and override control to realize the automatic control in sulfur recovery unit.
应用平衡常数法、物料衡算和热量衡算，建立了直流法克劳斯硫磺回收工艺的计算模型。
Using the equilibrium constant method, the thermal and material balance calculation, and has set up the calculation model of straight Claus sulfur recovery process.
从经济及装置特点两方面对硫磺回收装置电伴热和蒸汽夹套伴热进行了比较。
Electric heat tracing and steam jacket heat tracing in sulfur recovery unit have been compared in the light of economy and unit features.
这些新工艺、新技术将为我国硫磺回收后续工艺加工无粉尘、无腐蚀及干燥的固体硫提供了技术借鉴。
The new processes and technologies provide technical references for processing dry solid sulfur without ashes and dust and corrosion in the processes following sulfur recovery process in our country.
本文开发了工艺计算所必需的数学模型，并编制了克劳斯硫磺回收工艺模拟程序。
The author develops a mathematical model which is necessary for technological calculation and draws up a simulated program of Claus sulfur recovery technology.
综述了催化裂化富氧再生技术、富氧克劳斯硫磺回收工艺和TPA装置富氧工艺。
The paper reviews FCC enrichment regeneration technology, CLAUS enrichment sulphur recovery process and the enrichment technology used in terephthalic acid (TPA) equipment.
硫磺制酸装置余热回收系统的过热蒸汽温度是一个重要的参数。
The superheated steam temperature is an important parameter in the waste heat recovery system of sulfur-based sulfuric acid plant.
分析了兖矿国泰化工有限公司甲醇车间硫磺回收尾气so 2排放超标的原因。
The problem of drainage SO2 over specification in the sulfur recovery unit in methanol plant, Yankuang Cathay Coal Chemicals co. Ltd. is analyzed.
本课题是以广州石化二万吨硫磺回收装置为例建立一套安全评价系统。
This thesis takes the twenty-thousand-ton sulphur recovery device as the research object, and the aim is to build one risk assessment system.
通过结构参数及操作参数两方面的优化，得到了新型硫磺回收尾气处理灼烧炉。
Through structural and operating parameters in both the optimization of the new sulfur recovery by burning stove.
以二氧化硫摩尔浓度从1至100%天然气流，可处理，以达到接近100%的硫磺回收效率。
Gas streams with a molar concentration of sulfur dioxide from 1 to 100% May be processed to achieve nearly 100% sulfur recovery efficiency.
介绍了CT64 B硫回收催化剂在硫磺回收装置的应用情况，并结合生产标定数据对其性能及使用效果进行技术分析。
The paper introduces the application conditions of CT64B catalyst in the sulfur recovery device and analyses its performance and operating effect on the basis of the productive rating data.
介绍了新型多功能硫磺回收催化剂LS- 981的研发和工业应用结果。
The development and commercial application of LS-981 catalyst, a new multifunction sulfur recovery catalyst, were introduced.
对CT6-4B硫磺回收催化剂在兰州石化公司炼 油厂的工业应用情况进行了技术总结与分析。
The paper is a technical summary and analysis of industrial application of sulfur recovery catalyst CT6-4B in oil refinery of Lanzhou petrochemical company.
本研究工作为稳定引进装置硫磺回收率作了有益的探索。
This work has offered a useful exploration in stabilizing the sulfur recovery rate of imported unit.
鉴此，近年来SCOT法工艺的技术进步，总体上围绕2个相互关联的目标：即在提高硫磺回收率的同时节能降耗。
In view of the above-mentioned facts, the technology advances of SCOT process in recent years were generally around 2 interrelated targets, increasing sulfur recovery and saving energy simultaneously.
硫化氢是一种有毒的工业废气，从硫化氢中制取硫磺和氢气不但可以回收硫化氢，而且可获得清洁能源氢气和硫磺。
Hydrogen sulfide is a noxious industrial gas. Recovering hydrogen sulfide from industrial waste gas can not only protect the environment but also provide cleaning energy - hydrogen and sulfur.
介绍了LO - CAT硫磺回收工艺的基本原理、工艺流程、技术特点、工程实例及其在国内的应用前景。
Introduced are basic principle, process flow, technical characteristics and engineering example of LO-CAT sulfur recovery process and its application prospect in China.
本文论述了影响引进装置硫磺回收率的主要原因，并结合生产实际，采取了相应的对策，取得了良好的经济效益和社会效益。
The main reason influencing the sulfur recovery rate of imported unit is discussed. Linking with production practice, appropriate measures are adopted and good economic and social benefit is achieved.
本文论述了影响引进装置硫磺回收率的主要原因，并结合生产实际，采取了相应的对策，取得了良好的经济效益和社会效益。
The main reason influencing the sulfur recovery rate of imported unit is discussed. Linking with production practice, appropriate measures are adopted and good economic and social benefit is achieved.
应用推荐