• 最大的问题是如何找到合适的厚壁果酱罐子:如果买新的,也许还不如直接买便宜的果酱划算。

    The hardest thing is getting hold of proper thick-walled jam jars; new, they can be more expensive than some cheap jams.

    youdao

  • 门级以下瘤胃内最多的是拟杆菌、厚壁菌门、螺旋体和纤维菌门。

    Bacteroidertes, Firmicutes, Spirochaetes, and Fibrobacteres were the most abundant in rumen under phyla level.

    youdao

  • 当整个厚壁圆筒达到屈服状态时,推导了在内压力和轴向力联合作用下的厚壁圆筒的塑性极限载荷表达式。

    The relative formulations between limit loads (both axial force and internal pressure ) acting on it are derived while the whole thick-walled tube is led to the yielded state.

    youdao

  • 通过与已有文献的比较,得出的结论同时适用于内层管为薄壁管和厚壁管的情况。

    The conclusions are applicable to the case where the inner tube is thin-walled or thick-walled in comparison with available literatures.

    youdao

  • 研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。

    The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.

    youdao

  • 最后,利用所得的解研究了材料的中间主应力效应和拉压强度差效应对厚壁圆筒安定极限压力的影响。

    Finally, the influences of the intermediate principal stress and the strength-difference on the shakedown limit pressure of the thick-walled cylinder are investigated by the present solution.

    youdao

  • 提出采用主磁通与漏磁通相结合的方法检测在用油管剩余壁厚的方法。

    A measuring method combining main magnetic flux and magnetic flux leakage for approaching the residual wall thickness of the oil well tubing in-service was presented.

    youdao

  • 工厂检验芯偏移以及壁厚的频率?

    What is the foundry's checking frequency for control of core shift and wall thickness?

    youdao

  • 研究了动载荷作用下带裂纹厚壁筒的应力强度因子。

    We study stress intensity factor of thick wall cylinder with cracks under dynamic load.

    youdao

  • 相对较短的厚壁完井部件,它装在预计发生紊流的区域。

    A relatively short, heavy-walled completion component installed in areas where turbulence is anticipated.

    youdao

  • 斜轧穿孔机轧辊形状设计十分重要,其中辗轧锥角的正确设计是获得高精度壁厚的关键。

    Proper design of roller cone angle of smooth rolling is the key to obtaining a high accurate wall thickness.

    youdao

  • 以厚壁筒的热传导为模型,研究了高能燃烧剂作用下岩石介质中温度场分布。

    Based on the heat conduction theory of thick wall cylinder, the distribution of temperature field in rocks acted by high energy burners was calculated.

    youdao

  • 壁厚60毫米的聚氨酯泡沫保温材料。

    Wall thickness 60 mm with polyurethane foam insulation.

    youdao

  • 实践证明,该措施对提高壁厚精度具有良好的效果。

    The actual production proves the machine can improve the accuracy of the wall thickness.

    youdao

  • 壁厚的增加防止了由于在紊流区中的侵蚀而引起的早期损坏。

    The additional wall thickness prevents early failures due to erosion in the turbulent flow area.

    youdao

  • 由材料的失效温度及铸件的壁厚,直接找到该材料的失效距离,从而计算其损耗系数。

    Based on the clay degradation temperature and casting section thickness, the degradation region can be determined directly, and the consumption coefficient can be calculated.

    youdao

  • 因此常采用复合式或绕丝式的容器,使厚壁容器具有安全失效的性能。

    So the compound or wire-wounded pressure vessels are often adopted to assure the fail safe of thick-wall vessels.

    youdao

  • 预测的壁厚和实验结果吻合得很好。

    The forecasted wall thickness was conformed to the experimental result.

    youdao

  • 进而分析了管道内压、壁厚、裂纹止裂长度和初始裂纹速度对裂纹驱动力(也即裂纹扩展)的影响。

    Meanwhile, the influences of pipeline internal pressure, wall thickness, crack arrest length and initial crack velocity on the crack driving force (crack propagation) are further studied.

    youdao

  • 对复合微球进行热处理除去有机物中心,制备出壁厚可剪裁的空腔硅球。

    The polymer cores were removed by calcination and hollow silica spheres with tailored wall thickness were produced.

    youdao

  • 通过实验对影响壁厚变化的主要因素作数学回归,建立起简便实用的壁厚回归模型,对于现场生产有着重要的指导作用和使用价值。

    Practical wall thickness model has been established by regression on major effect factors, and it plays an important and practical role in actual production process.

    youdao

  • 全位置自动焊接技术的特点是,焊丝可以连续送进,焊丝熔敷速度快,焊接质量较高,尤其适用于大口径、厚壁管的焊接。

    This welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.

    youdao

  • 顶头是斜轧穿孔主要的变形工具之一,其作用是将实心管坯穿轧成一定壁厚的空心毛管。

    Plug is one of the key deformation tools in cross piercing. Its function is turning a solid bar into a hollow bloom.

    youdao

  • 航空发动机空心涡轮叶片的壁厚是保证叶片强度的一个关键参数。

    The wall thickness of the hollow aeroengine turbine blade is a critical parameter for ensuring its strength.

    youdao

  • 目的:探讨肝硬化失代偿期腹水与胆囊壁增厚的临床关系及其诊断价值。

    Objective: to investigate the clinical relationship and diagnostic value of ascites and gallbladder wall thickening during hepatocirrhosis decompensation.

    youdao

  • 不同壁厚的贮氢合金经中温热处理4小时后可获得相对最佳的综合电化学性能。

    The alloys with different thickness after heat-treated at middle temperature for 4 hours could show better comprehensive electrochemical properties.

    youdao

  • 不同壁厚的贮氢合金经中温热处理4小时后可获得相对最佳的综合电化学性能。

    The alloys with different thickness after heat-treated at middle temperature for 4 hours could show better comprehensive electrochemical properties.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定