零件端平面不作为最佳分型面。
分型线或分型面是分离上下型箱的线或面。
The parting line or the parting surface is line or surface that separates the cope and drag.
模具型腔可采用分型面分割模板的方法获取。
The mold cavity was obtained by splitting mold base in parting surface.
主要阐述了注射模的分型面以及它的顺序、定距分型。
The injection mould parting line and its sequence as sizing space split were described.
给出了直接式挤压铸造模具和双分型面挤压铸造模具设计技术要点；
The key design points of die for direct squeezing casting and the die with two-parting surface were introduced.
在分析铸件工艺性的基础上，确定了模具分型面，论述了模具工作原理。
On the basis of analyzing pressing parts processing characters, die-casting die parting surface is defined, die-casting die working principle is stated.
确定了分型面、浇注系统等，选择了注射机，计算了成型零部件的尺寸。
Had determined a minute profile, the casting system and so on, has chosen the injection machine, has calculated the formation spare part size.
该模具用卸料板推出机构的模架，开模后，推杆将卸料板沿分型面推开；
Using the stripper plate pushes out the die-frame in the die, after opening the die, the push-bar pushes out the stripper plate along the parting line;
采用基于特征的设计方法，通过定义分型面，由塑料制品直接生成成型零件；
By using the feature-based design method and defining the parting surface, parts can be directly formed from plastic products.
设计了摆钩分型式、弹簧分型式、导柱定距式等双分型面模具的定距分型机构。
Given-distance parting mechanism in the mould with bi-parting surface was designed including pendulum-hooked parting, spring parting and given-distance leader parting.
论述了压铸分型面的类型和选择，并对典型压铸件分型面进行了方案的确定和分析。
This article discusses the style and choice of split face for die-casting mould.
对于高光模具的颐养，要留神在应用中即时整洁模具分型面及排气槽，免得构成排气不良。
Highlights of the mold to live, to watch in the application of instant neat mold parting surface and exhaust slot, lest constitute exhaust bad.
因此，分型面设计技术与方法的研究，成为注塑模具CAD技术研究与开发的重要内容之一。
So the research on the parting surface design technology and method is becoming one of the important facets in the field of the injection mold CAD.
在分型面确定的基础上，完成了凸轮轴铸件相应冷铁的结构优化设计，并详细的介绍了其优化过程。
Based on determining of mold joint, the thesis finished the structure optimization design of chill, and introduced the process of optimization in detail.
分型面设计直接影响精铸模具结构设计与模具加工复杂程度，是一项典型的强经验、弱理论的工作。
The parting surface designing of investment casting mould to turbine blade is a difficult job which needs more experience and influence the configuration of its mould and process.
模具的分型面是两模板接近型腔的那些部分，它们对接一起形成油封并且避免型腔里塑性材料的损失。
The parting surfaces of a mould are those portion of both mould plates, adjacent to the impressions, which butt together to form a seal and prevent the loss of plastic material from the impression.
采用分型面排气槽、顶杆间隙排气与排气塞排气相结合的排气系统设计能够很好地满足模具排气需要。
The vent system composed of vent groove, vent plug and clearance of ejector pin can fit the need of venting.
采用树脂砂砂型、覆膜砂砂芯，上、下两个箱体均采用平做平浇的工艺方案，并选取箱体中线为分型面。
Resin sand mould was adopted with precoated sand core. The upper and bottom half boxes used horizontal pouring design with box middle line as parting face.
本系统共分为三个模块，即特征造型模块、基于CBR的模具分型面设计实现模块和分型面设计帮助信息模块。
The system is composed of the module of feature modeling, realization module of CBR-based mold parting surface design and help information module of the parting surface design.
针对电刷端盖压铸件结构及工艺要求，选择端盖口部大端面为动静模分型面，铸件上各成形小孔由动静模型芯对接组成，浇注系统采用中心浇道。
The small formation holes in the brush cover was constructed with the mold core in moving and static container, and center ingate was employed to the gating system.
通过对主体压铸件的结构工艺性分析，确定了模具结构设计方案，介绍了台阶分型面选择、立式缝隙浇口浇注系统设计、预复位推出机构设计和镶块镶拼结构设计。
Througn designing three axial slots in internal threaded portion and optimizing nib structure, a design was made on the injection mould with a two-step ejecting mechanism with non-rotating.
前言：为了保证一种既有斜齿轮又有直齿轮零件在注塑成形后能顺利脱模，给出了一套一模两位，点浇口进料，旋转脱模，胶套式二次分型的双分型面注射模的设计。
To make sure that a plastic part with helical gear and spur gear can be demoulded successfully, an injection mould is designed with double parting faces, point gate feeding and rotating demould.
将最后成形的面块放在听型烤模(烤听)中 让其发酵一段时间 这称为"最后发酵"这样可使面块再次充气鼓起因为成形操作过程中曾驱走许多以前的气体.此发酵阶段通常需25～40分钟 视待制面包的品种而定.
fermentation period, which is known as "final proof" so that they can become once more inflated with gas. since much of the old gas had been expelled during the moulding operation.
按结构不同可以分PVC为型，（塑料面）PVG 型（在PVC基础上加附橡胶面）整芯阻燃带，执行MT/914-2002标准。
PVC can be divided according to different structures for the type (plastic surface) PVG type (based on attaching the PVC rubber surface) flame retardant solid band, perform MT/914-2002 standards.
单瓣紫花木槿的小孢子母细胞经过减数分裂形成四面体状的四分体，成熟花粉是二细胞型花粉，圆球型，表面有刺毛。
The results showed that the type of microsporic tetrads of the simple flower is belong to tetrahedral type and the mature pollen is two-celled with bristles on the surface.
目的选择理想治疗方法，提高治疗效果，对颅颌面凹陷畸形进行分型。
Objective to classify the craniofacial depressed deformities and select ideal therapeutic methods, so to receive good treatment results.
小孢子四分体为四面体型排列，成熟花粉有2 -细胞和3 -细胞型2种。
The microspores are arranged in a tetrahedral tetrad. The mature pollen grains are of the 2-celled and 3-celled types.
本文从流行病学、分型以及治疗方法三方面，就目前桡骨远端骨折的研究状况作一综述。
This review aims to make a conclusion about advancement in distal radius fractures, in aspects of epidemiology, classification and treatment.
构造了具有自仿射分形性质的重力型断裂面滑移模型；
The gravity fracture surface sliding model with self-affine fractal character is established.
构造了具有自仿射分形性质的重力型断裂面滑移模型；
The gravity fracture surface sliding model with self-affine fractal character is established.
应用推荐