某些ADC配置系统采用主从式模型,而其他一些系统则采用多主机模型。
Some ADC configuration systems follow a master-slave model while others follow a multi-master model.
在旧车牌系统下,每次车主从一个行政区移居到另一个的时候就必须更换车牌。
Under the old system, car-owners had to change their plates every time they moved from one département to another.
本文对主从遥控系统理想性能的实现进行了理论分析和实验研究。
This paper makes theoretic analysis and experimental research on the realization of ideal performance of a master slave remote system.
该生产线采用基于PLC的主从控制系统来控制,可靠性高、操作方便。
It is controlled by the master slave control system based on PLC, with high reliability and convenient operation.
其次,介绍了CH375主从模式下单片机系统软件设计,并给出了部分源代码和程序流程图;
Secondly, Single-Chip computer system soft design under host and slave mode of CH375 is introduced, and the paper shows the flow chart, the program design in detail and some codes.
而双缸控制系统中有两种控制方式,即主从方式和等同方式。
There are two control types in double cylinder control system, namely, the principal and subordinate mode and equal mode.
本课题是在借鉴国际先进水平和设计思路的基础上,设计一种双cpu主从控制的颜色分选系统。
After studying the international advanced technology and design thoughts, a double CPU master-slave color sorting system is designed in this thesis.
文章以总线型多点数据采集系统为例,介绍了用RS- 4 85构成主从机方式通信网络的一般组网方法。
The data collecting system of bus mode as an example is introduced and general methods of constructing communicating networks of principal and subordinate mode by RS-485 are given.
系统设计为主从式两级微处理器控制结构。
The system is of the controlling structure of subordinate two-poles microprocessor.
分析了一个具有扇区非线性输入且含有参数不确定性以及外部噪声干扰的主从混沌系统的同步控制问题。
This paper analyses the synchronization control for a class of master_slave chaotic systems with parameter uncertainties, external noise disturbances and sector nonlinear input.
基于数字信号处理器(ADSP21020),建立了一种主从式实时电视跟踪系统。
Based on the Digital Signal Processor (ADSP21020), a principal and subordinate structure real-time TV tracking system is established.
讨论了一种用于两轴半立式铣床的PC -DSP主从式计算机数控系统。
This paper describes a computerized numerical control system for a two and a half axis upright numerical control milling machine.
天线扫描系统采用主从式双计算机结构及零位检测装置,提高扫描精度;
The scanning accuracy is improved by adopting structures of master slave computer and zero detecting.
基于绝热开关或能量恢复技术,提出了应用于低功耗系统的主从型绝热D触发器、SR触发器和JK触发器设计。
Based on the adiabatic switching or energy recovery technique, some master-slave flip-flops including d, SR and JK flip-flops were presented as candidates for low power applications.
本文设计了一种用于饲料生产设备的主从式控制系统,系统由工控机和PLC组成。
This paper presents a principal and subordinate control system for feed equipments. The control system is combined with a industrial control computer and a PLC.
本系统采用两级微机控制,主从分布式监测系统结构。
This system is controlled by a two-level computer, and it is a distributed inspecting system with a principal and subordinate structure.
建立了主从式同步卷绕控制系统的数学模型,并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
控制系统由TMS320C25及486计算机组成的主从机系统实现。实验结果表明此种控制方法是有效的。
The control system is realized by the host slave system, which consists of 486 computer and TMS320C25. Experimental results have demonstrated the effectiveness of this kind of control strategy.
本文在对国内外主从随动远距离操纵机械手系统进行了广泛调研的基础上,建成一个具有视觉反馈的远距离操作车辆救援机械手系统。
In this paper, we have set up a special vehicle rescue manipulator with vision master-slave control system after analyzing rescue manipulator system with vision feedback in home and abroad.
双信道系统的同步质量相比主从式单信道系统会有明显下降,而进一步增加信道数量,同步品质并不发生显著改变。
The synchronization performance of dual-channel system decreases obviously compared with master-slave single channel system, and changes little when the channel number increases.
主从比例系数是主从异构式机器人系统的一个重要参数。
The proportional coefficient of the master and slave manipulators is an important parameter for an isomeric robotic system.
在总线结构的分布式测控系统中,当系统实时性要求较高、突发性较强时,主从通信方式往往不能适应需要,而需要采用竞争式通信。
In distributed measurement and control system with bus structure, master slave communication may be replaced by race communication, when real time and burst are needed.
根据系统的实时性和跟踪精度指标,设计了主从式结构计算机控制系统。
Based on the real time and tracking accuracy indexes, the master-slave computer control system is designed.
通过与手术机器人控制系统的集成,虚拟手术仿真还可以为机器人系统的主从运动控制提供精确的定位信息。
Besides, by integrating with surgical robots, virtual surgery simulation could also afford accurate positioning information to master-and-slave motion control of the robot systems.
基于对主从机器人控制系统的动力学分析,研究了借助力觉临场感技术实现主从医疗机器人遥操作的控制理论和设计方法。
It focuses on the control theory and design method of master-slave medical robot system, that can implement precise teleoperation by means of force telepresence technology.
本系统采用分布式计算机控制系统,由一台PC机和多台单片机构成主从式总线型结构。
This system USES the distributed computer control system and is made of a PC and several SCMs, which show a principal and subordinate structure with bus style.
本文叙述了主从式温度测量控制系统的基本组成、工作原理、程序控制框图和系统的特点。
In this paper, the basic constitute, working principle, program chart and character of the main-subsidiary system measuring and controlling temperature were given.
新系统采用主从式多服务器技术把数据相同的多个OLAP服务器有机地组成一个系统向客户提供服务。
Several single OLAP servers with the same data are combined systematically into the new system by adopting the technique of principal and subordinate multi-servers.
最后设计应用于主从式控制系统的通讯程序,这个程序是基于MODBUS协议的。
At last, the communication program applied in Master-Slave control system base on MODBUS protocol is designed.
最后设计应用于主从式控制系统的通讯程序,这个程序是基于MODBUS协议的。
At last, the communication program applied in Master-Slave control system base on MODBUS protocol is designed.
应用推荐