在旧车牌系统下，每次车主从一个行政区移居到另一个的时候就必须更换车牌。
Under the old system, car-owners had to change their plates every time they moved from one département to another.
某些ADC配置系统采用主从式模型，而其他一些系统则采用多主机模型。
Some ADC configuration systems follow a master-slave model while others follow a multi-master model.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
本课题是在借鉴国际先进水平和设计思路的基础上，设计一种双cpu主从控制的颜色分选系统。
After studying the international advanced technology and design thoughts, a double CPU master-slave color sorting system is designed in this thesis.
该生产线采用基于PLC的主从控制系统来控制，可靠性高、操作方便。
It is controlled by the master slave control system based on PLC, with high reliability and convenient operation.
本文对主从遥控系统理想性能的实现进行了理论分析和实验研究。
This paper makes theoretic analysis and experimental research on the realization of ideal performance of a master slave remote system.
其次，介绍了CH375主从模式下单片机系统软件设计，并给出了部分源代码和程序流程图；
Secondly, Single-Chip computer system soft design under host and slave mode of CH375 is introduced, and the paper shows the flow chart, the program design in detail and some codes.
分析了一个具有扇区非线性输入且含有参数不确定性以及外部噪声干扰的主从混沌系统的同步控制问题。
This paper analyses the synchronization control for a class of master_slave chaotic systems with parameter uncertainties, external noise disturbances and sector nonlinear input.
对一种可用于配电自动化管理的基于智能通信控制器的主从式dcs系统进行了研究和设计。
A kind of DCS system that is based on intelligent communication controller and can be used in the power distribution automation management is researched and designed.
本文提出了一种适用于一般空间曲线、曲面数控加工的离线插补原理，并探讨了书这一原理应用于主从式数控系统的理论和实战问题。
This paper introduces a theory based on off-line interpolation suitable for NC machining to generate curved line or face, with a primary-secondary computer NC system.
基于数字信号处理器(ADSP21020)，建立了一种主从式实时电视跟踪系统。
Based on the Digital Signal Processor (ADSP21020), a principal and subordinate structure real-time TV tracking system is established.
文章讨论了控制变量耦合的受限系统的主从对策问题。
The paper presents Stackelberg games for the systems with coupling control variable.
本文在对国内外主从随动远距离操纵机械手系统进行了广泛调研的基础上，建成一个具有视觉反馈的远距离操作车辆救援机械手系统。
In this paper, we have set up a special vehicle rescue manipulator with vision master-slave control system after analyzing rescue manipulator system with vision feedback in home and abroad.
天线扫描系统采用主从式双计算机结构及零位检测装置，提高扫描精度；
The scanning accuracy is improved by adopting structures of master slave computer and zero detecting.
基于绝热开关或能量恢复技术，提出了应用于低功耗系统的主从型绝热D触发器、SR触发器和JK触发器设计。
Based on the adiabatic switching or energy recovery technique, some master-slave flip-flops including d, SR and JK flip-flops were presented as candidates for low power applications.
介绍一种用VB工具软件开发集散型控制系统的方法，并用主从式通信控制方式解决了通信网络中的总线竞争问题。
This paper introduces means to develop a distributive control system with VB language. With main follow control manner, the problem of bus competition is overcomed.
而双缸控制系统中有两种控制方式，即主从方式和等同方式。
There are two control types in double cylinder control system, namely, the principal and subordinate mode and equal mode.
同时在文章中还介绍了一种分布式数控系统任务分配的数学方法及主从分布式数控系统的通讯协议等问题。
A mathematical method of tasks assignment for distributed CMC system and the communication protocol of master-slave distributed CNC system etc are also introduced.
根据系统的实时性和跟踪精度指标，设计了主从式结构计算机控制系统。
Based on the real time and tracking accuracy indexes, the master-slave computer control system is designed.
本文设计了一种用于饲料生产设备的主从式控制系统，系统由工控机和PLC组成。
This paper presents a principal and subordinate control system for feed equipments. The control system is combined with a industrial control computer and a PLC.
控制系统由TMS320C25及486计算机组成的主从机系统实现。实验结果表明此种控制方法是有效的。
The control system is realized by the host slave system, which consists of 486 computer and TMS320C25. Experimental results have demonstrated the effectiveness of this kind of control strategy.
主从比例系数是主从异构式机器人系统的一个重要参数。
The proportional coefficient of the master and slave manipulators is an important parameter for an isomeric robotic system.
本文叙述了主从式温度测量控制系统的基本组成、工作原理、程序控制框图和系统的特点。
In this paper, the basic constitute, working principle, program chart and character of the main-subsidiary system measuring and controlling temperature were given.
在总线结构的分布式测控系统中，当系统实时性要求较高、突发性较强时，主从通信方式往往不能适应需要，而需要采用竞争式通信。
In distributed measurement and control system with bus structure, master slave communication may be replaced by race communication, when real time and burst are needed.
介绍净化搬运机械手的总体结构和主从配置的控制系统。
We introduced the control system of the depurative transportation manipulator in the point of its whole structure and its principal and subordinate configure.
本文在对CNC系统进行面向对象分析的基础上，建立了以PC机作为上位机，DSP运动控制器作为下位机的主从式数控铣床系统。
Based on the object-orient analysis of CNC system, the paper proposes a design idea of master-slave CNC system, which builds with PC as upper chip and motion controller with DSP as lower chip.
本系统采用分布式计算机控制系统，由一台PC机和多台单片机构成主从式总线型结构。
This system USES the distributed computer control system and is made of a PC and several SCMs, which show a principal and subordinate structure with bus style.
通过与手术机器人控制系统的集成，虚拟手术仿真还可以为机器人系统的主从运动控制提供精确的定位信息。
Besides, by integrating with surgical robots, virtual surgery simulation could also afford accurate positioning information to master-and-slave motion control of the robot systems.
介绍在复杂的主从分布式系统中提高主机串行通讯与背景程序实时性的一种方法。
This paper introduces a method of improving the real? Time on main single chip computer serial communication and the background programs in the complicated distributed system.
介绍了两种多单片机系统的直接并行通信方法，即主从方法和多主方法。
This paper deals with two types of direct parallel communication of multi-SCP system, the pricipal and subordinate method and poly-pricipal method.
应用推荐