不锈复合钢的焊接是材料焊接工艺的难点之一。
The welding of stainless compound steel is one of the difficulties of material welding technique.
主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.
实践证明，只要遵循其焊接要点，不锈钢复合钢板的焊接质量是非常稳定的。
The practice proved that the welding quality of stainless steel clad plate was very steady if following the welding points.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
介绍了内衬不锈钢复合钢管良好的使用性能，以及管与管之间和管与管件之间的几种连接方式。
It introduces the good usage properties of liner stainless steel compound steel pipe and several kinds of connection types between pipe and pipe and pipe with pipe fitting.
文中对缺陷产生的原因进行了分析，认为缺陷系不锈钢复合钢特殊的焊接结构和制造工艺所致。
In this article defect occurring reason was analyzed and hold that the defect was caused by the special welding structure of the stainless steel clad plate and fabrication process.
对不锈钢复合钢板的焊接特点进行了理论分析，总结出其焊接三要素：焊接坡口、焊接材料和参数、焊接顺序。
The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence.
不锈钢复合钢制压力容器相对纯不锈钢压力容器便宜很多，又能起到相同的耐腐蚀作用，因此在石油化工行业中被广泛应用。
As pressure vessels made of stainless clad steel plates are much cheaper and have the same role of anti-corrosion, compared with those made of stainless steel plates, the former are used widely.
管棚复合钢支撑技术，是一个通过超前管棚、支撑钢拱、白铁皮隔离、工作面封堵的相互配合和共同作用，形成了具有强大支护抗力的复合支护体系。
Pipe lodgepole-steel tunnel support technique is a strong composite support system consisting of advance pipe lodgepole, support stell vault, tin plate packer and working surface plug-back.
酸可减少钢表面的酸可溶性物质，使得表面的高反应性的铬处于复合氧化物形式。
The acid depletes the steel surface of acid soluble species, leaving the highly reactive chromium on the surface in a compounded oxide form.
银的压铆螺母柱，不锈钢的复合金属，还有亚克力字。
Silver standoffs, composite metal with a stainless steel finish, and acrylic lettering.
本文就不锈钢复合板焊接中可能出现的问题以及在实际焊接中应采取的工艺措施进行了讨论。
In this paper, the problems which may encounter in welding are described and process measures taken in production welding are discussed.
保护级别最高的钢层之间使用的陶瓷复合装甲。
The highest protection level use a composite armor of ceramic between steel layers.
采用镶铸工艺制备了硬质合金-45钢双金属复合耐磨材料。
The wear resisting composite of cemented carbide-steel 45 is fabricated by using casting-in process.
条状耐候钢复合结构，参考邻近建筑物的外墙赋予它鲜明的橙色。
Strips of weathering steel clad the structure, giving it a burnt orange colouring that references the facades of neighbouring buildings.
本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。
This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.
由于隐身性的需求，复合材料—钢混合结构的封闭式桅杆逐渐在舰船上使用。
To meet the needs of stealth, the enclosed masts with composite and steel materials are gradually applied on warships.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
为探讨多层钢胶复合材料的力学性能及联合工作特征进行了大量试验。
Experiments have been carried out to explore mechanical properties and co working characteristics of the multilayer steel glue composite material.
介绍钢铝复合导电轨在三轨系统中的作用、工作原理、结构和常用材料。
The role, working principle, structure and commonly used material of steel aluminum composite conductor rail in the three-rail system are introduced.
结果表明：硬质合金-45钢双金属复合耐磨材料结合层硬度过渡均匀，冲击韧性是普通硬质合金的5—6倍。
The results show that the hardness of combination area of cemented carbide-steel 45 composite is 5—6 times beyond that of the general cemented carbide.
通过实验研究了不锈钢和铝双金属的固相轧制复合。
In this paper, the investigation has been carried out on the solid bonding of stainless steel with aluminum by rolling experiment.
本文对厚编织复合材料板由硬的钢圆柱弹丸穿孔问题进行了研究。
The study is concerned with perforation of thick woven composite plates by hard steel cylinder.
结果表明，该钢经复合处理后，具有较好的表面硬度和良好的耐磨性，显著地增加了刀具的使用寿命。
The results showed that the steel after combined treatment had higher surface hardness and wear resistance, and prolonged the service life of cutting tool.
通过对不锈钢复合板的焊接，从中了解和掌握复合板的特性，提高了焊接效率和焊接质量。
The characteristics of compound plate are understood through welding of the compound plate, thus the welding efficiency and quality can be improved.
作为一种新型复合材料，玻璃钢正在被广泛应用在各个行业。
As a new type composite material, fiberglass reinforced plastics has been used in many industries.
成功的试制成了覆盖有镍-铁-金刚石复合电刷镀层的钢球研磨板。
Finally steel balls millstone covering with Ni-Fe-diamond composite electro-brush plating film is produced successfully.
介绍了钨极自动氩弧焊在不锈钢复合管生产线上的应用。
The application of automatic TIG welding on stainless steel compound pipes production line is introduced.
结构的概念是基于不锈钢复合板对外部金属的支持。
The structural concept is based on pairs of exterior metal supports, clad in stainless steel composite panels.
结构的概念是基于不锈钢复合板对外部金属的支持。
The structural concept is based on pairs of exterior metal supports, clad in stainless steel composite panels.
应用推荐