讨论了VME型真空制膏机的使用适应性及该设备搅拌器溶解盘剪切方式的选择方法。
This paper discussed the adaptation of VME machine and the seleted method, sachas shearing and cutting mode of the solution salver on its mixer.
针对辊压线生产型钢定长锯切的缺点，进行了研究和探索，提出采用在线剪切方式，分析了剪切原理，得出了剪切力和剪切行程。
This paper is aimed at searching for a new method in customized cut-off cold formed profiles steel on roll-forming line. The slant shear theory is put forward and a new machine is designed.
有很多人和你一样，不想浪费时间把电子邮件中附带的联系方式剪切并复制到通讯簿上。
There are loads of people just like you who would rather not waste time cutting and pasting contact information from emails into digital address books.
MathML3中剪贴板行为的详细规范有望鼓励实现者实现MathML，以可互操作的方式剪切和粘贴。
Hopefully the detailed specification of clipboard behaviour in MathML3 will encourage implementors to implement MathML, cut and pasted in an interoperable way.
Display视图允许您以剪切类型的方式处理活动代码(参见图8)。
The Display view allows you to manipulate live code in a scrapbook type fashion (see Figure 8).
和预期一样，iPhoneOS 3.0包含了剪切、复制和粘贴功能，一个覆盖所有软件、功能的搜索功能，以及更加透明的操作方式。
As expected the iPhone OS 3.0 software includes cut, copy and paste, a new search function across all the phone's features and applications and expanded parental controls.
研究了网格湍流的被动控制方式对射流剪切层以及相关预混火焰的影响。
The influence of passive control method of grid turbulence, on the shear layer of a jet and related premixed flames was investigated.
基于剪切筒模型和常用疲劳加载方式，首先建立了循环荷载作用下钢筋与混凝土界面脱粘应力的计算模型；
Based on the shear-lag model and the usual loading way, the computation model of interfacial debonding stress under tension-tension cyclic loading is established first.
另外，你也可以选择图片的缩放比例、剪切和对齐方式。
Plus, you'll find options for scaling, cropping, and aligning pictures.
由于在板材的剪切加工过程中材料的变形集中在很小的区域内，且以断裂方式告终，使得这一过程非常复杂。
The sheet metal shearing process is very complicated since the deformation is focused on the small zone of the sheet metal and ended with fracture occurrence.
讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。
The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.
分级加载方式测得的内聚力比剪切带的分级加载方式大，但这两种方式对内摩擦角的影响不大。
And values of cohesion under stepped loading are larger than those under stepped loading with shear zone, but the two methods have little influence on values of friction Angle.
这种结构提供了一个平稳的剪切行动的方式第一次和第二次叶片。
Such a structure provides a smooth shearing action by means of the first and second blades.
总结了黄土剪切破坏的整体变形方式、破坏类型和变形破坏力学模式。
Summaries have been reached on the whole distortion way due to the loess shearing destruction, the type of destruction and the mechanics pattern of the distortion destruction.
液体粘性调速离合器是一种靠摩擦片之间的油膜剪切力来传递动力的新型传动方式，在大功率风机、水泵调速节能方面有着广泛的应用前景。
As a new type of power transmission device utilizing the shear of oil of film between two sets of discs. It is widely used for speed regulation and energy saving in large fans and pumps.
粘接剂主要以剪切的方式破坏，粘接剂剪切强度是一个值得注意的问题。
Attention should be paid to the shear strength of the adhesives since the shear stress could cause failure in the adhesive layer.
无论何种试验加载方式，冻结粘土的剪切强度都与围压关系不大，只随着温度的降低而增大，而内摩擦角则有随着温度的降低而减小的趋势。
Although the shear strength of frozen clay is only increasing with the temperature decreasing, there is a tendency that the angle of internal friction is dropping with the lowering of temperature.
本文基于岩体节理断裂扩展和剪切滑移两种失稳破坏机制，运用统计断裂力学方法建立了两种破坏方式下节理岩体强度的理论表达式。
In the paper, on the basis of two rupture modes-fracture propagation and shearing slide, the strength of jointed rock is derived by use of statistical fracture mechanics.
推导同时考虑弯曲变形和剪切变形时的群桩刚度矩阵，采用分别计算各子结构阻尼的方式来考虑整个结构的阻尼，并采用等效线性化原理来考虑土体的非线性。
Stiffness matrix of the piles was given, including bending and shear deformation effects. The damping of the entire structure was calculated using the damping of each of the sub-structures.
根据轴向应力对棒料剪断方式及其断口形状的影响，设计了对螺帽锻造所用热轧棒料能进行精密剪切下料的新型结构的径向支持下料模具。
The die for the blanking under the radial clamp of nuts for 1C engine is designed based on The effect of radial stress on the shearing method for bars and the fracture shape.
高孔隙岩石的三种局部化变形方式：压缩带、剪切带和膨胀带是常见的三种在野外已经找到证据的变形方式。
Recently, localized planar zones of deformation have been discovered in high-porosity rock, which are called compaction bands, shear bands and dilation bands.
该机器采用国产机械盘刀进行分切原料，采用的切割方式上刀片对应底刀套剪切。
Home-made mechanical slitting device using "upper blade to bottom blade slot" slitting method is equipped with this machine.
采用剪切法构造所有可能的排样方式，详细叙述确定上界与下界的方法。
All possible normal cutting patterns are configured systematically by a cutting method. The methods to obtain upper and lower bounds are described in detail.
发现钛合金铆钉在应力波铆接过程中，主要是以绝热剪切变形的方式实现冷加工塑性变形的。
It is shown that the cold-worked plastic deformation of TB-2 in the process of stress-wave-riveting is achieved in the form of adiabatic shear substantially.
结论3例FA-A型患者均无功能性FANCA蛋白表达；基因缺失、移码突变和剪切位点突变是FANCA基因的主要失活方式。
Conclusions No functional FANCA protein was found in these 3 cases of FA-A, and intragenic deletion, frame shift and splice site mutation were the major pathogenic mutations found in FANCA gene.
对低碳钢板材进行表面球磨处理，利用电子显微术研究剪切变形方式下深度方向的组织演变。
A low carbon steel was treated by means of ball milling, and the shear-stress induced microstructural evolution along the depth was examined by using electron microscopy.
同时，还讨论了边界等件、加载方式、剪切力的方向及初始缺陷的影响。
The effects of boundary conditions, loading forms, shear directions and initial imp…
为了模拟并行隧道分步开挖和并行开挖两种方式即在不同应力释放程度下的实际变形究竟有多大差别，本文针对重塑粉土和原状土进行了不同剪切路径下的变形特性试验研究。
To simulate the difference of deformation of multi-step excavation and simultaneous excavation in double metro tunnels, a group of remoulded soil and undisturbed soil test has been carried out.
为了模拟并行隧道分步开挖和并行开挖两种方式即在不同应力释放程度下的实际变形究竟有多大差别，本文针对重塑粉土和原状土进行了不同剪切路径下的变形特性试验研究。
To simulate the difference of deformation of multi-step excavation and simultaneous excavation in double metro tunnels, a group of remoulded soil and undisturbed soil test has been carried out.
应用推荐