圆锥运动是刚体运动的几何效应。
The coning effect is caused by the motion of the rigid body axis.
分析中可考虑体系的弹性变形、内部机构和刚体运动。
The elastic deformation, the inner mechanism and the rigid motion of systems can be properly considered.
提出一种基于形态变换的非刚体运动的广义内插方法。
A generalized morpho interpolation method for nonrigid body motion is proposed based on morpho translation.
讨论强调了惯性张量在论述刚体运动时所起的重要作用。
The discussion has served to emphasize the important role the inertia tensor plays in the discussion of the motion of rigid bodies.
对于一维物体的一般刚体运动,给出了把它转化为平移运动的方法。
For the general rigid motion of the 1d object, we give a method to transform it into the translation case.
通过最优控制理论设计弹性稳态器,抑制由于刚体运动而激发的弹性振动。
To suppress the simultaneous elastic vibration in movement, an elastic stabilizer is designed by using the LQR control method.
本文应用电测技术和刚体运动学原理,提出了一个三维运动测量和计算方法。
This paper presents an approach for three-dimensional motion measurement and analysis by applying the electric measuring technique and the kinematic principles of rigid body.
由于本方法没有涉及任何刚体运动约束,所以适用于各种非刚体运动的特征点对应。
Because this method is not based on the constraint of body rigidity, it can solve the correspondence problem of nonrigid body motion.
船舶碰撞过程中,被撞船的刚体运动较之碰撞区的局部损伤变形存在一定程度的滞后。
The rigid body motion of struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
本文主要研究基于直线光流场重建带直线特征的三维刚体运动和结构的计算理论和方法。
This paper involves the research of reconstructing motion and structure of 3d rigid body with straight-line feature from straight-line optical flow.
实验证明,该文方法能建立非刚体运动特征点的正确对应,并能解决特征点的遮挡问题。
Results show the approach can establish correct correspondence of feature points and can solve the problem of occlusion.
船舶碰撞过程中,被撞船的刚体运动较之碰撞区的局部损伤变形而言,存在一定程度的滞后效应。
The rigid body motion of a struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
接下来,你可以添加额外的约束来阻止模型的刚体运动,然后消除此选项重复运行算例来解决此问题。
You can then apply additional restraints to prevent rigid body motion. Repeat the analysis without activating this flag after fixing the problem.
由于此文的方法没有建立在运动的刚性约束之上,所以该方法同样适用于各种非刚体运动的特征点对应。
Because this method is not based on the constraint of rigidity, it can solve the correspondence problem of nonrigid motion.
本文通过对斜面上滚动球体的分析,得出这种刚体运动的空间极迹和本体极迹,并对其图线进行了讨论。
In this paper, the herpolhode and polhode os a rolling ball on an inclined plane have been obtained and discussed by analysing the motion of this ball.
该系统采用水平集方法,利用分段平滑运动场的约束条件,实现非刚体运动目标检测和背景的运动估算。
This system can realize the detection of the non-rigid moving object and the estimation of the background velocity through the Level-Set method and piece-wise smooth motion field constraint.
镜片刚体运动误差、表面误差、表面粗糙度、表面散射和衍射是影响X射线成像望远镜成像质量的主要因素。
Rigid body motion, surface errors, surface roughness, surface scattering and diffraction are mainly reasons which affect image quality of the X-ray imaging telescopes.
采用基于轿车线性化刚体运动的稳态转弯模型对轮毂轴承外部载荷进行推导计算,进而对轴承外部载荷的特性进行了分析。
A method to determine the cars wheel-bearings external load (CWEL) was developed from this model and the characteristic of the CWEL was presented.
在对电机转子和滑轨支架进行运动学分析的基础上,给出了电机转子的单刚体运动学模型和带有滑轨支架的刚体系运动学模型。
On the basis of kinematic analysis of rotor and gimbal guideway, the rigid body kinematic models of single rotor and rotor with the gimbal guideway were derived.
本文提出了一种多个三维刚体运动的匹配和估计算法,将对应点匹配和运动参数估计结合在一起,转化为代价函数的最优化过程。
This paper presents a matching and estimation algorithm for 3-d rigid body motions, integrating the procedures of the point match and motion estimation into a global optimization process.
由于箱式浮体结构的低阶固有频率很低,相应的弹性振型的响应与刚体运动耦合,结构在波浪中没有发现明显的低阶弹性模态谐振。
No significant resonance of the low flexible body modes is found due to the coupling of the responses among these modes and the rigid body modes.
本文介绍了一种用复数方法求解刚体平面运动的模式化解法。
The pattern solution of the plane motion of rigid body with complex number method is provided.
本文用比拟法推得了刚体一般运动的螺旋轴方程。
The screw axis equation of the general motion of a rigid body has been derived by means of a comparison method.
该文将计算机科学与理论力学相结合,以刚性球体为例介绍了多刚体物理运动仿真的步骤和方法。
This paper combines theoretical mechanics with computer, takes rigid spheres as an example to introduce the step and method of physical movement simulation of multi rigid bodies.
用向量分析的方法,从三维角度对刚体的运动进行了进一步讨论,通过典型实例作了更清楚的说明。
The movement of rigid body is further discussed through vector analysis from the three dimensional Angle in this paper. Typical examples are also illustrated.
本文提出且推导了刚体平面运动的加速度投影定理,并介绍了该定理的应用。
The theorem of Projections of accelerations of plane motion of rigid body is derived in this paper. Some applications of this theorem are given as examples.
通过变换,给出太阳帆板、航天器中心刚体耦合运动微分方程组。
By transformation, the differential equation group of couple motions of solar wings and the central rigid body of the spacecraft is obtained.
对三种情况下平面运动刚体的动量矩进行了分析和讨论,得到一般形式的动量矩方程。
The moments of momentum of plane motion rigid body in three different situations are analyzed and discussed and general form of equation of moment of momentum is obtained.
给出了解决刚体平面平行运动问题的一组完整方程,讨论了力系简化在质心平面内的条件。
A integrated equation set for solving plane parallel motion of rigid body was derived, and the conditions of system of forces simplified on the center of mass plane was discussed.
研究在地球万有引力场和磁场中的磁性刚体航天器在圆轨道上的混沌姿态运动。
Chaotic attitude motion of a magnetic rigid spacecraft in a circular orbit of the earth is treated.
应用推荐