Properly insulating your attic and sealing any leaks under doors or around windows, will greatly improve the effectiveness & efficiency of your both cooling AND heating systems.
将顶层阁楼与下面的房子进行隔热,将门窗漏风处都堵好,如果这些措施得当,将会大大地提高空调制冷与制热系统的工作效率。
When asked when the cooling systems might be brought under control, a spokesman says: "We just don't know how long it will take."
当被问及冷却系统多久才能够被控制住,一发言人表示“我们不知道这将会花费多长的时间”。
Simply put, if you can virtualize a number of under-utilized systems on a single server, there are distinct savings in power, space, cooling, and administration due to having fewer servers.
简单来说,如果您可以对一个服务器上多个未经充分利用的系统进行虚拟化,由于服务器的数量少了,显然可以节省大量电力、空间、制冷和管理成本。
Bond performance in reinforced concrete under various high temperatures and different cooling methods was studied.
对在不同受热温度、不同冷却方式下的钢筋混凝土黏结性能进行了研究。
By comparison of solutions obtained under various cooling conditions, the theory ground was provided for adopting appropriate methods to restrain the deformation of the resistance chip.
通过不同冷却条件下计算结果的比较,为制动电阻片采取合适的方法抑制变形提供了依据。
The results indicated that the steel is composed of quasi bainite, lath martensite and twin martensite under air cooling condition, and also has better combination of strength and toughness.
试验表明:该钢空冷条件下即可获得准贝氏体、板条马氏体及孪晶马氏体的复合组织,且具有较好的强韧性配合。
This market segment is expected to continue growing as EU member states work toward achieving their heating and cooling targets under the European Commission's Renewable Energy Directive.
这个市场预计将继续增长,因为欧盟成员国努力实现他们的供热和冷却目标,根据欧盟委员会的可再生能源指令。
Supramolecular hydrogels were formed via cooling the aqueous solutions of G2 under ambient condition.
通过在室温下冷却g2的水溶液,形成了超分子水凝胶。
However, the cooling rate obtained in these tests was very difficult to do under the industrial scale.
然而,实验室条件下试验所达到的冷却速率在工业化生产中较难实现。
The global MWL lies between the two MWLs simulated under wet adiabatic and isobaric cooling processes, respectively.
全球大气水线位于湿绝热冷却过程和等压冷却过程条件下分别模拟的两条大气水线之间。
Tribology properties test could be made on this tester under different conditions, such as vacuum, filled with different gas, heating and cooling.
该机可以在真空、充不同气体、加热及冷却等多种条件下进行材料的摩擦学性能测试。
The microstructure and mechanical properties of a new kind of microdistortion gear steel under different cooling rate was studied.
对新型微变形齿轮钢在不同冷却速度下的组织和力学性能进行了研究。
With the detailed repairing scheme, a dissimilar steel welding technique about 45 steel and 20 steel under the condition of temperature and sharp cooling is brought forward and gets success.
提出了在室温急冷的条件下,45钢与20钢异种钢焊接的工艺措施,并取得成功。
Usage experience of spraying propulsion cooling devices is concluded and two usage plans under different conditions are discussed.
在总结喷雾推进冷却装置应用经验的基础上,探讨了不同情况下的两种应用方案。
The purpose of the cooling system is to keep the engine at its most efficient operating temperature at all speeds under all driving conditions.
冷却系统的作用是保证引擎在任何路况的任何车速下都在最高效的的运行温度中。
Vacuum cooling is a rapid evaporative cooling technique under vacuum, which can be applied to specific foods and in leafy vegetables.
真空冷却是在真空下水分快速蒸发的预冷技术,可用于食品尤其适于叶类蔬菜的冷却。
Ammonia corrosion of condenser copper tubes in the air removal section cannot be avoided as a result of ammonia collection and existence under super cooling condition.
由于氨的聚集与氧的存在,在凝汽器空冷区出现过冷度的情况下,铜管的氨腐蚀是不可避免的。
A centralized spray cooling system for farm buildings was developed and tested under a practical production condition in summer.
研究开发了一种用于农业建筑的集中雾化蒸发降温系统,进行了实际生产条件下的夏季降温试验。
The mathematical model of distillation processes combining vaporization and condensation under uneven heating and cooling was developed.
推导了汽化与冷凝结合的蒸馏过程中非均匀加热冷却情况下的数学模型。
The effect of recharge quantity of refrigerant (adsorbate) under the condition of keeping the adsorbent quantity constant on performance of the cooling tube is studied in the paper.
研究了在吸附剂量不变的情况下,制冷剂(吸附质)充注量对制冷管性能的影响。
This radiator allows electronic cooling products to function under higher ambient temperature.
采用该散热器,可以使电子制冷产品适应更高的环境温度下工作。
The expanding curves and continuous cooling transformation curve (dynamic CCT curve) of X60 pipeline steel were obtained by dilatometry and microscopic test under different cooling speed.
利用膨胀法,结合金相法,测定了X60不同冷却速度下连续冷却转变的膨胀曲线,获得了该钢的连续冷却转变曲线(动态CCT曲线);
Thermoelectric refrigeration is an efficient electronics cooling method under proper application conditions.
在适当的应用条件下,热电制冷是一种有效的电子设备冷却方法。
Workers have toiled under hot and harsh conditions to stabilize the plant since the cooling systems were destroyed by the natural disasters.
工人们在炎热、恶劣的条件下长时间辛苦工作,以稳定被自然灾害破坏了冷却系统的核电站。
Using the model, the temperature effect of stable isotopes in precipitation is simulated under different cooling conditions.
利用该数学模型,模拟了不同冷却条件下稳定同位素的温度效应。
In China and abroad, almost all of the dynamic load simulation software cannot calculate the hourly cooling load of the building, under random weather and building conditions.
国内外,几乎所有动态负荷模拟软件都无法计算出任意气象和任意建筑条件下的建筑物逐时冷负荷。
It points out that under current situation, the optimum design of electric propulsion ship's central cooling system will raise the reliability and economy of system operation.
在目前条件下,通过对电力推进船舶中央冷却系统的优化设计,将会提高系统运行的可靠性和经济性。
In this paper, effects of Ce, La and nd on graphite morphology and matrix structure in cast iron with various sulphur content and under various cooling rate have been studied.
研究了不同含硫量和不同冷却速度下铈、镧和钕对铸铁石墨形态和基体组织的影响。试验表明,不同的稀土元素在铸铁中的行为是不一样的。同时,硫和冷却速度对稀土元素的作用有重要的影响。
Under the operating conditions of engine temperature, considerable influence of temperature of cooling water and oil on fuel economy of diesel engines with small load has been observed.
证实了在柴油机自然升温的情况下,冷却水温度和机油温度对柴油机小负荷经济性有着重要影响。
With CD40 lubricating oil as work medium, under the engine cooling system work conditions, 21 geometrical schemes of stainless steel offset strip fins were studied.
采用CD 40柴油机油为工作介质,在发动机冷却系统实际工况下,对21种几何尺寸的错列锯齿型不锈钢翅片进行了研究。
应用推荐