The first stage circuit receiving the first reference voltage input, while the second input to receive input signals.
第一级电路的第一输入端接收参考电压，而第二输入端接收输入信号。
The signal receiver circuit including the first stage, second stage circuit, the current compensation circuit and bias circuit.
该信号接收器包含第一级电路、第二级电路、电流补偿电路以及偏压电路。
The second stage circuit of the first and second inputs, respectively, in the first stage circuit coupled to the first and second output.
第二级电路的第一、第二输入端分别耦接于第一级电路的第一、第二输出端。
Bias circuit according to the reference voltage to bias the first stage circuit and the current compensation circuit, and set the bias current compensation circuit.
偏压电路依据参考电压来偏压第一级电路与电流补偿电路，并设定电流补偿电路的偏压。
Equipment designers can minimize the effects of these mismatches or "unbalances" through judicious choices of input and output stage circuit topologies and common-mode impedances.
设备设计师能通过审慎地选择输入输出级电路的拓扑和共模阻抗来最小化失配或“非平衡”的效应。
After each stage of the etching process a fixed depth of this is dissolved away, exposing a different part of the circuit to the etching chemicals.
在蚀刻技术的每个阶段，固定高度的阻材料层会消失，暴露出不同部分的电路进行化学物质的侵蚀。
"I believe there is a circuit in the human brain that creates laughter through these steps to the stage of overflowing," Kimura said confidently.
木村教授自信地说：“我认为人脑中存在一个回路，能通过以上这几个步骤产生笑声。”
The circuit board is placed in the welding stage, the pins through hole components welding, choose appropriate spray tin, soldering start.
将电路板放置在焊台上，针对需要焊接的通孔元件管腿，选择合适的喷锡口，启动波峰焊接。
The fourth stage, the remainder charges discharges by the testing circuit, the target electric potential reduces exponentially.
第四阶段内靶材上的剩余电荷通过测试电路放电，靶电势呈指数规律衰减。
The cascade current mirror was used in the circuit, and the output of the OPAMP was used for the bias of itself and to drive the next stage.
其设计特点是采用了共源共栅电流镜，运放的输出作为驱动的同时还作为自身的偏置电路；其次是采用了带隙温度补偿技术。
The design of horizontal driving circuit serves completely the performance of horizontal output stage and it is actually an important and inseparable part of the horizontal output circuit design.
行激励级电路的设计是完全为行输出级服务的，它实质上是行输出级电路设计的一个重要而不可分割的组成部分。
According to the encode demands of different stage resolution, clock-control encode circuit is designed.
根据不同级精度的编码要求，设计出时钟控制编码电路。
According to the structure of impulse voltage generator, the EMTP simulation software is used to build a 36-stage charging circuit model of impulse voltage generator.
再根据冲击电压发生器结构，使用EMTP仿真软件搭建36级冲击电压发生器充电回路模型。
As the integrated circuit design has stepped into the deep ultra-submicron stage, the complexity of the circuit increases continually, chip test faces very huge challenge.
随着集成电路设计进入超深亚微米阶段，电路复杂度不断提高，芯片测试面临着巨大的挑战。
In this stage, the generated code has no direct knowledge of the circuit and can be in any language.
在这个阶段，生成的代码并不能直接看到电路并且可以是任何语言。
To the actualities that domestic study of self-timed circuit design principles is just in the primary stage, a in-depth study of handshake protocol and delay assumption have been done.
针对目前国内对自计时电路设计原理方面的研究才刚刚起步的现状，采用抽象和具体相结合的对比研究方法，对握手协议和延迟假定进行了深入研究，并对研究结果进行了直观的说明。
Motion control system of an ultra precision wafer stage with application to integrated circuit production was presented.
描述一种应用于集成电路制造的超精密硅片台系统及其运动控制。
For circuits design, the thesis designs a switch capacitor comparator circuit, a two stage amplifier, a digital correction circuit and a clock pump-up circuit.
在具体的电路设计中，主要研究设计了一个开关电容比较器、一个两级运算放大器、数字校正电路和一个时钟提升电路。
The circuit principle modeling is based on the Hall law, and is propitious to the circuit performance analysis checkout for factory in early stage of equipment design.
电路原理建模的解算依据是基于霍夫定律等，适用于生产厂家在装备设计初期对电路性能分析检验。
The circuit comprises a first filtering stage; a delay element; and a harmonic filter.
该电路包括第一滤波级、延迟元件、以及谐波滤波器。
The system consists of the AC input stage, single phase PFC, main inverter, output low-pass filter, auxiliary power supply, and load current sharing circuit, etc.
整个电源由输入电路、功率因数校正器、主逆变器、输出滤波电路、辅助电源、均流电路等部分组成。
The supply power of copper vapor laser (CVL) consisting of DC high voltage circuit, pulse discharge circuit and one stage magnetic pulse compression circuit is introduced here.
文中介绍了由直流高压电路、脉冲放电电路和一级脉冲磁压缩电路组成的铜蒸气激光器电源。
Peak detector circuit is a fast adaptive detector circuit, and the limiting amplifier involves two stage differential amplifiers.
峰值检波采用自适应检波电路，限幅放大器采用两级差分放大器构成。
Novel circuit structure and topologies of single-stage DC switching power supplies with uninterruptible power supply and high power factor, based on flyback converter, are proposed.
该文提出了一类基于反激变换器的单级不间断高功率因数直流开关电源电路结构与拓扑族。
Combining the main circuit and control circuit mathematical model of the functional modules of the transfer function, the mathematical model of the power stage is obtained.
将控制回路的各功能模块的传递函数与主电路的小信号模型相结合，即可得到电源系统的小信号模型。
Based on the two-stage magnifying and demarcating temperature scale, new circuit for measuring precise temperature is designed.
设计出了新的二级放大的测温电路，对温度进行了精确标定。
Process and facility selection of two stage closed circuit grinding and its application in phosphoric acid facility matching wet-process grinding system were introduced.
介绍了两段闭路磨矿工艺技术路线、设备选择以及在云峰分公司磷酸装置配套湿法磨矿系统上的应用效果。
It uses tow-stage differential amplifiuers to increasee the circuit gain and uses a source follower as a voltage buffer to decrease signal volt- age losing.
该电路应用两级差动放大增加电路增益，利用源极跟随器作为电压缓冲器以减少信号电平损失。
Recently, internal and overseas investigators are developing single-stage PFC circuit, which has higher PF and lower price.
现在国内外正在开发研究单级功率因数校正电路，具有很高的功率因数，且成本低。
Passive Power factor correction circuit, two-stage and single-stage APFC circuits are researched, which applications are given by comparison of their performance.
对无源pfc电路、有源两级PF c电路和有源单级PF C电路进行了分析及性能比较，指出它们分别适用的场合。
应用推荐