Chinese medicine spray drying, granulating and coating.
中药喷雾制粒及包衣。
The types and reasons for wall sticking during spray drying were analysed.
对喷雾干燥粘壁的类型和原因进行了分析。
Objective To study the stability of glucosamine sulfate prepared by spray drying.
目的硫酸氨基葡萄糖喷雾干燥后稳定性试验。
Spray drying is a liquid process shaping and drying industry, the most widely used process.
喷雾干燥是液体工艺成形和干燥工业中最广泛应用的工艺。
OBJECTIVE To screen and improve spray drying condition for the extract and obtain the best process.
目的对风热感冒提取液喷雾干燥时的条件进行筛选和改进，寻求最佳工艺条件。
The thermo mechanism of spray drying technology is rather complex and generally studied by experiments.
喷雾干燥技术的热干燥机理十分复杂，机理的研究一般采用实验的方法。
The effect of acidification and concentration of longan juice on spray drying longan powder was studied.
以龙眼为原料，研究了加工过程中龙眼汁酸化和浓缩对龙眼喷雾干燥的影响。
High viscosity paste should not use spray drying method, and the cost of this method is high, generally use.
高粘度糊液不宜使用喷雾干燥法，且这种制法成本较高，一般很少采用。
One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.
通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。
Objective To review the application and progress of spray drying technique in the field of traditional Chinese medicine.
目的阐述喷雾干燥技术在中药领域中的应用及进展。
Objective: the influence of spray drying technology on the damp proof effect of microcapsules and the mechanism were studied.
目的：考察喷雾干燥工艺对乌药鞣质微囊防潮效果的影响，并研究了造成影响的机制。
Objective: the influence of spray drying technology on the damp proof effect of microcapsules and the mechanism were studied.
中文摘要：目的：考察喷雾干燥工艺对乌药鞣质微囊防潮效果的影响，并研究了造成影响的机制。
Applications include: Dust control, spray drying, humidification, odor control, product coating, product cooling, and gas cooling.
应用包括：尘埃控制、喷雾干燥、加湿、气味控制、产品涂层、产品冷却和气体冷却。
Objective: To research the effects of glass transition on the processing and quality of Traditional Chinese medicine spray drying.
目的：研究玻璃化转变对中药喷雾干燥过程和产品质量的影响。
The simulation results show that the short drying time and large evaporation rate are characteristics of the pulsating spray drying.
模拟结果表明脉动气流喷雾干燥具有干燥时间短，蒸发速度大等特点。
Two patents of pressing agents were achieved, the new pressing agents are applied to handwork mixing as well as spray drying process.
申请了两项成形剂专利，新成形剂适用于手工掺胶工艺又适用于喷雾干燥工艺。
The results show that the effect of slurry solid content and spray drying technique on the powders granularity distribution are obvious.
研究结果表明：浆料固相含量对造粒粉体粒径分布影响明显，粉体粒径随固含量的增加而增大。
Y_2O_3 solubility in different media and conditions of PSZ powder and ceramic flat prepared by spray drying and inorganic jelling was studied.
本文研究喷雾干燥法和无机胶化法制得PS Z粉末和陶瓷片，在不同介质及条件下Y_2O_3的溶解度。
Poly aluminum chloride is processed through the spray drying process, so it is also called the high efficiency spray drying of the aluminum chloride.
聚氯化铝是通过喷雾干燥工艺加工而成。因此也可叫高效级喷雾干燥聚合氯化铝。
There is much inconvenience in measuring particle size distribution by experiments at present, because of droplets movement complexity in spray drying.
由于喷雾干燥中雾滴的运动较复杂，所以目前多是通过实验测量来确定雾滴粒度分布，有很多不便因素。
The vacuum hot oil spray drying technique of transformers is introduced. The plan to be carried out is given. The testing results and data are analyzed.
介绍了变压器真空热油喷淋干燥方法，提出了具体实施方案，并对测量结果及试验数据进行了分析。
This paper studies microencapsulation of cream essence by spray drying explores technological parametersand selects wall materials for microencapsulation.
用喷雾干燥法对奶油香精微胶囊化进行了研究，探索了工艺条件，对微胶囊壁材进行了选择。
In this paper studies were undertaken to get microencapsulated lycopene with storage stability and water dispersibility by means of spray drying technique.
本研究采用喷雾干燥法对番茄红素进行微胶囊包埋，以期改善番茄红素的不稳定性和水不分散性。
Nanometer tungsten nitride powders were synthesized as amm onium metatungstate by means of spray drying, calcination, milling and nitration in pure ammonia.
以偏钨酸氨为原料，采用喷雾干燥、焙烧、球磨和纯氨氮化工艺进行了氮化钨粉体制备研究。
The wall sticking of half wet material is concerned to the structure, fixing and operation of spray drying tower and sprayer, the motion of hot air in tower.
半湿物料粘壁主要与喷雾干燥塔结构、雾化器结构、安装、操作以及热风在塔内的运动状态有关。物料熔点低于干燥温度时容易产生热熔性粘壁。
Action mechanism of surfactants in spray drying process was discussed deeply and schematics of capillary action force during particle drying was established.
深入探讨了表面活性剂在喷雾干燥过程中的作用机制，并提出了颗粒在干燥过程中所受毛细管作用力的示意图模型。
"The breakthrough for developing the spray drying process involved removing salts and cryoprotectants like glycerol from bacterial suspensions," explains Edwards.
“研发喷雾干燥技术的突破口在于如何从细菌悬液中去除盐类和甘油之类的冷冻保护剂，”爱德华斯解释道。
The reunion reason of boron carbide submicron powders in manufacturing process was analyzed, spray drying and airflow crash were adopted to deal with the materials.
对碳化硼超细微粉在干燥时的硬团聚现象进行了分析，并分别采用喷雾干燥和气流破碎两种方法对物料进行处理。
In this paper, several kinds of technology including vacuum freeze drying, water-bath solidifying, spray drying, and their condition were studied to prepare for solid honey.
该文较系统研究并比较了包括真空冷冻干燥法、水浴固化法和喷雾干燥法在内的几种固体蜂蜜制备工艺。
In fact, Edwards' first exposure to the spray drying process occurred when he was working with a spray dryer to produce highly respirable drug aerosols in a food science lab.
实际上，爱德华斯首次接触喷雾干燥技术可以追溯到他在一个食品科学实验室利用喷雾干燥机制造易吸入性药物喷雾剂的时候。
应用推荐