Process characterization is a prerequisite for process validation. In Chapter 3, a description of how to carry out thorough and consistent process characterization is presented.
工艺特性鉴定是工艺验证的先决条件，在第三章中，出现了描述如何进行彻底的和连续的工艺特性鉴定。
The dispersion, double electrical layers theory, drying methods, surface modification and characterization methods in preparing process of nanometer particles were introduced in this article.
介绍了纳米粒子制备过程中的分散、表面双电层理论、干燥方法、表面修饰与表征方法。
SEM, UV-vis spectroscopy and electrochemical techniques were used for characterization of assembly process.
用扫描电子显微镜（SEM）、紫外可见光谱和电化学技术对组装过程进行了表征。
The synthesis, structure, properties and process interaction of low k dielectrics are reviewed. Characterization techniques for low k dielectric films are summarized.
综述了低介电常数介质薄膜的制备方法、结构与性能表征、工艺兼容性等领域的最新进展。
Work closely with manufacture process and NPI engineer to architect, define and deliver optical characterization equipment and various test and calibration fixtures.
密切关注制造工艺和新产品工程师，以便架构，界定和传输光学特性设备和各项测试及校准装置。
Additional chapters offer methods for the characterization of therapeutic proteins throughout the production process, along with methods and strategies for viral inactivation and protein formulation.
另外的章为治疗的蛋白质的描述提供方法在整个生产过程期间，跟病毒的失活和蛋白质公式的方法和策略一起。
Recently, the third step is becoming more and more concerned thanks to the application of a number of advanced technologies in characterization of diffusion study in film - forming process.
直到最近，一些先进表征技术在成膜扩散研究中的应用，使得成膜过程的第三阶段研究受到人们越来越广泛的关注。
The study based on the craft mineral in tailings, introduced the recovery process of sericite from tailings and explored the characterization of sericite and utilization in rubber.
研究从尾矿的工艺矿物学入手，介绍了绢云母的回收工艺，探讨了绢云母产品的表征及其在橡胶制品中的应用情况。
This paper describes the synthesis procedures and deuterium isotopic content characterization method, some of the process parameters have been discussed also.
介绍了氘代乙醛的合成工艺及其氘代率的表征方法，并对主要合成工艺参数等进行了探讨。
Geophysical logging data must be first normalized to guarantee a unified scale in research area during the process of reservoir description and reservoir bed characterization.
在利用测井资料进行油藏描述、储层表征的过程中，首先必须对测并资料进行标准化，使测井曲线在研究工区内有统一的刻度。
Based on the fractal characterization of worn surfaces, classical contact mechanics, and wear theory, a fractal model for predicting wear during the running in process was developed.
基于磨损表面的分形表征、经典接触理论和磨损理论，建立了磨合磨损预测分形模型。
Characterization method of defects in silicon carbide by chemical etching and optimal process parameters are obtained.
论文得到了用腐蚀法表征碳化硅材料缺陷的方法和优化的工艺参数。
First, we learn in Chapter 11 about process optimization and characterization studies for the purification of an E. coli-expressed protein product.
首先，我们在第11章中知道了关于大肠杆菌表达的蛋白产物的纯化工艺优化和特性研究。
The process of electrochemical deposition and the morphology of obtained deposits of polyaniline film is studied in combination with SEM and FTIR characterization.
采用傅里叶红外光谱仪(FTIR)，扫描电子显微镜(SEM)表征了本征态和掺杂态聚苯胺的结构和微观形貌。
The quantitative characterization of the microdefects of rock fracture process has always been the key of CT image analysis.
岩石在断裂破坏过程中微缺陷的定量描述始终是CT图像分析的关键。
The rheological characterization of dairy products is important to texture. stability and process design.
乳制品的流变学特性与其质地、稳定性和工艺设计有重要关系。
Moreover, the author will discuss and find out the significance and importance of the dual self-feelings of actors in the process of role characterization.
并讨论双重自我感觉在演员塑造角色过程中的作用、意义。
The characterization with transmission electron microscope (TEM) and infrared spectrometry (IR) has illustrated the copolymerization process.
透射电子显微镜表征互穿共聚物乳胶膜的微观结构。
By utilizing the psychological description and characterization of the characters, this thesis tries to demonstrate the hard process of psychological development of the human society.
通过对人物心理变化的描述、对角色性格特征的刻画，本文意在反映人类社会中心理变迁的艰难历程。
Sludge characterization is important for an efficient operation of the activated sludge process.
污泥的特性对于活性污泥过程高效率的操作很重要。
The performance characterization of SSP by SEM, and estimation of physical and chemical forming process of SSP by temperature field of line focused area are analyzed.
并通过对线聚焦加热区的温度场测量分析推断颗粒硅带的物理化学形成过程。
The mechanism of the deactivation of TH-06 catalyst in the process of synthesis of linear alkylbenzene(LAB) was studied through catalyst characterization.
对直链烷基苯合成过程中TH- 06催化剂的失活及再生进行了研究。
Finally, a miniature test structure for RF device characterization and process monitoring is also proposed.
最后，一通用于射频元件特性分析与制程监测的微型化测试结构亦被提出。
Meanwhile, in the analytical process the expandable resource of language is demonstrated in the coordinate of registerial characterization in the classroom context.
这一分析过程说明了课堂语境特征体现了语言表达资源的可扩展性。
The micro-encapsulation technology, including the core and the shell materials, different significant synthesize process, various characterization methods are studied in this thesis.
本文采用微胶囊技术，以不同树脂对不同相变材料进行包裹，并对微胶囊相变材料的性能进行了较系统的研究。
The strength forming process of humid-plastic cement-soils is expatiated based on the characterization of the cement hydration process in cement-water-clay system.
从水泥在水泥-水-粘土系统中水化的特点出发，阐述了湿塑性水泥土的强度形成过程。
Thirdly, this paper presents static and dynamic distribution network reconfiguration algorithms based on time interval according to the conception of system process state characterization.
再次，基于时间过程特征状态的概念，本文提出了面向时间区间的配电网静态重构和动态重构算法。
Therefore, cloning, analysis and characterization LACS from oilseeds can provide us important information about the process of lipids anabolism and catabolism.
在油料作物中克隆、分析和鉴定LACS对于油脂代谢的研究具有重要意义。
Therefore, cloning, analysis and characterization LACS from oilseeds can provide us important information about the process of lipids anabolism and catabolism.
在油料作物中克隆、分析和鉴定LACS对于油脂代谢的研究具有重要意义。
应用推荐