The MR damper may be configured to operate in shear mode.
所述MR阻尼器可以被配置为以切变模式操作。
Fluid in shear zones is closely related to alteration in gold deposits.
剪切带中流体与金矿中交代蚀变作用密切相关。
Volume contraction in unloading is known in shear tests of most kinds of soils.
卸载体缩是很多土在剪切试验中表现出的一种变形特性。
Higher DA results in higher values of shear strain and volumetric strain in shear band.
扩容角越大，剪切带最终可以获得越来越高的剪切应变和体积应变。
In shear wall structure and frame - shear wall structure the percentages are very close, they are all 32%.
剪力墙和框架一剪力墙结构相差不多，均为32%左右。
The structural controlling in mineralization mainly results from driving force in shear zone and fracturing.
金矿化的构造控制作用主要体现为剪切带的动力作用和脆性断裂作用两方面。
The steel ratio at the bottom of a large beam should be restricted to avoid possible column failure in shear.
对于柱端剪切破坏应采用限制大梁底部纵向钢筋的方法予以避免。
Local void ratio and average void ratio in shear band are investigated as residual shear strength is reached.
在流动剪切应力为残余剪切强度时，对剪切带内部的局部孔隙比和平均孔隙比进行了理论分析。
Tests showed that the SRC joints possess an apparent increase in shear strength and energy dissipation capacity.
试验表明，劲性砼节点具有良好的抗剪能力和耗能能力。
Generally, the contribution of bending stiffness out of plane in shear wall is neglected in engineering analysis.
在计算时一般都忽略剪力墙面外刚度的贡献。
Generally, it's no need to design fixture for concrete filled steel tubular columns in shear resistance expressly.
一般情况下，不需要专门为钢管混凝土柱进行抗剪配筋设计。
Vortex structure in shear layer and the interaction among vortices are two important aspect of coherent structure …
平面混合涡结构的演化和旋涡相互作用的研究，是湍流拟序结构研究中的两个重要方面。
Elastic shear strain in shear band was dependent on shear elastic modulus, damage variable and residual shear modulus.
考虑刚度劣化后，剪切带的弹性应变由弹性剪切模量、损伤变量及残余剪切模量确定。
The shear displacement increases with increasing normal stress and cement content at the same height in shear failure state.
同样的法向应力及高度处，切向位移随水泥含量的提高而增大。
Soaking leads to a significant increase in compression deformation and a significant reduction in shear strength and cohesion.
压实粘土浸水饱和后，压缩变形显著增加，抗剪强度和粘聚力则显著降低。
Minimum shear force required in the design of frame in frame-wall structure and necessity of story beam in shear wall are discussed.
分析了框剪结构中框架承担的最小地震剪力及框剪结构中剪力墙设楼层梁问题。
Total potential energy is composed of elastic and dissipated potential energies in shear band as well as work done by external force.
系统的总势能由剪切带的弹性及耗散势能和带外弹性岩石对剪切带所作的外力功构成。
Aim To investigate the physical mechanisms of randomization of the small scale disturbances in local high shear regions in shear flows.
目的研究空间局部高剪切区中小尺度扰动随机化的物理机制。
Koller will present new evidence on the involvement of reactive oxygen species in shear stress-related protective and damaging effects.
Koller介绍了“剪切应力和氧化应激的联系”他将在剪切应力相关的保护和破坏效应方面提供包含活性氧在内的新证据。
This paper sums the study results on wall slip of polymer melt in shear flow, which leads to the physical meaning of the developed Z-W model.
总结了聚合物熔体在剪切流场壁面滑移研究的成果，提出了Z W模型的物理概念。
Infiltration of rainwater during heavy rain increased soil saturation, sharp dropped in suction and caused a substantial decline in shear strength.
暴雨过程中雨水的入渗导致土体饱和度增加、吸力锐减并引起抗剪强度大幅下降。
The test results showed strong dependency of the post liquefaction stress strain response on rates of the water absorption in shear, and the others…
试验结果表明，具有相同密度的饱和砂土，其液化后的应力应变关系随剪切吸水速率的不同而呈现出硬化、理想塑性及软化的不同变化。
The review focuses on three specific topics, silk fiber mechanics, proteins in shear-induced processes in blood and enzymatic reactions under force.
它主要综述了三个特定的主题：丝蛋白纤维动力学模拟、血管中蛋白质的剪切诱导过程以及在力的作用下酶的反应。
A correlation of the energy of the strong magnetic field to the change in shear force was derived in accordance with the principle of energy transformation.
作者根据能量转换原理，推导了从强磁场能量到剪切力的转换关系式。
The apparent viscosity of the pastes was decreasing as the milled-time was getting longer, resembled Newtonian fluid in shear-thinning nature and low thixotropy.
球磨时间越长的样品，其糊的表观粘度越低，越偏近牛顿流体，触变性和剪切稀化也越低。
For dilative material in shear, the increment of local volumetric strain in shear band and the normal deformation of shear band due to shear dilatancy were derived.
在剪胀条件下，分析了剪切带内部的局部体积应变增量及由于剪胀而引起的剪切带的法向变形。
The prediction values of shear strain and temperature in shear band based on gradient-dependent plasticity are higher than those by use of classical elastoplastic theory.
由于微结构效应，基于梯度塑性理论的剪切带内部的最大塑性剪切应变及最高温度的预测值高于经典理论的预测值。
Density is the essential factor to decide the initial elastic modulus, and the elastic modulus in shear process is the result of combined action of stress status and density.
密度是决定初始弹性模量的根本因素，而剪切变形过程中弹性模量则是密度和应力状态共同决定的。
The analytical results show that porosity, void ratio, increment of porosity, increment of void ratio, rate of porosity and rate of void ratio are non-homogeneous in shear band.
结果表明，剪胀后的孔隙度、孔隙比、孔隙度增量、孔隙比增量、孔隙度变化率及孔隙比变化率均具有局部化特征，在剪切带中部其值最大。
The analytical results show that porosity, void ratio, increment of porosity, increment of void ratio, rate of porosity and rate of void ratio are non-homogeneous in shear band.
结果表明，剪胀后的孔隙度、孔隙比、孔隙度增量、孔隙比增量、孔隙度变化率及孔隙比变化率均具有局部化特征，在剪切带中部其值最大。
应用推荐