The gas solid contact efficiency was improved by adjusting the flow tracks of catalyst.
通过改变催化剂的流动轨迹达到改善气固接触效率的目的。
The basic process of gas solid catalytic reaction and rate equation have been discussed in this article.
文章讨论了气固相催化反应的基本过程和速率方程。
Firstly, the pressure distribution of gas solid flow along the circulating route is analyzed and experimentally studied.
分析气固两相流在循环路径中的压力分布，并通过试验对其进行了研究。
Gas solid two phase flow problems are widely met with in power equipment and numerical simulation methods are often used for studying them.
在火力发电设备中，广泛存在着气固两相流动的问题，用计算机对气固流动进行模拟研究已成为重要手段。
An mount of analyses and calculations are carried out in the case of measuring the particle parameters in gas solid phase flow by extinction method.
然后针对实际中，在采用消光方法测量气固两相流流场中的颗粒参数的情况下，对校正系数的表达式进行了大量分析计算。
The fractal theory was introduced into the gas solid catalytic reaction system to describe the influence of the surface irregularity of catalyst on the gas solid catalytic reaction.
利用分形维数定量表征催化剂的形状不规则程度，对其中进行的气-固相催化反应进行了分析计算。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
在一个加压喷动流化床装置上进行了冷态实验，研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
The structures of the gas solid two phase flow in the suspension bed were measured by a particle dynamic analyzer (PDA) at different apparent velocities for each of the nozzle structures.
用颗粒动态分析仪(PDA)测量了悬浮床内气固两相流动的结构，确定了不同表观气速和不同进气结构条件下的两相流场的特点。
Cyclone separator is a kind of inertial separator, more for gas-solid separation.
旋风分离器也是一种惯性分离器，较多地用于气固分离。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
The paper discusses the principle of PCT testing equipment; the over-all control scheme for the gas-solid reaction controller is decided.
在详细考察国外现有PCT测试装置及其原理的基础上，本文给出了气体-固体反应控制器的整体控制方案。
Cyclone separator is a kind of equipment that USES rotary motion of gas-solid two-phase fluid to make the solid particle separated from the gas flow by centrifugal force.
旋风分离器是一种利用气固两相流体的旋转运动使固体颗粒在离心力的作用下从气流中分离出来的设备。
The results show that the stronger the particle-particle collisional dissipation and gas-solid drag force, the more heterogeneous the flow structure.
计算结果表明颗粒间非弹性碰撞和气固间曳力的增大均使气固两相流动的非均匀性增大。
In this paper, a dynamic model of the gas-solid two phase flow in magnetically fluidized bed is established first.
本文首先从理论上建立了磁流化床气固两相流动的动力学模型。
The precise measurement and real-time monitor of gas-solid flow parameters is important for the product's quality control, stability of industrial processes, also the balance of energy supply.
对气固两相流参数的精确测量及实时监控直接关系到产品的质量、工业过程的稳定或能量供给的平衡。
In order to intensify the collision among the inhalable particles, a gas-solid jet flow was introduced into the agglomeration chamber to generate a local turbulent flow field.
团聚室中引入气固射流，使团聚室内形成局部湍流，强化颗粒间的碰撞。
The optical-electrical measurement is an effective and feasible way to measure solid particle concentration and velocity in gas-solid two phase flow.
应用光一电检测方法测量气一固两相流中固体微粒浓度、速度，是一种十分有效和可行的方法。
The method and condition are applicable to preparation of light paraffin gas-solid phase isomerization catalysts and optimization of their acidity.
此方法及条件适合于优化轻质烷烃气固相异构化催化剂的制备及其酸性能的优化。
Particle velocity is an important parameter describing the flow state of gas-solid two-phase flow.
颗粒的流动速度是反应气固两相流流动状况的一个重要参数。
In the study of heat transfer in CFB, most researchers focus on the heat transfer between the bed and the wall, few people attach importance to the gas-solid interfacial heat transfer.
在循环流化床内的传热研究方面，大多数研究者从事的是床层与换热表面之间的传热研究，而忽略了床中重要的气固两相间的传热。
Theoretical analysis and experimental research on bipolar charging phenomena and electrostatic potential distribution in gas-solid fluidized beds were carried out.
对颗粒的双极带电现象和气固流化床中的静电分布进行了理论分析和实验研究。
Based on study to two aspects of gas-solid two-phase flow and mathematical model, the calculation program for blade erosion and the countermeasures are resented.
根据气固两相流动和数学模型方面的研究，提出了磨蚀的计算方法和防止叶片磨蚀的有效手段。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
A detailed numerical study was conducted of the gas-solid inertial separation process in a circulating fluidized bed.
对循环流化床中气固惯性分离过程进行了详细的数值研究。
Based on stress and cavity relationship of particles in gas-solid two phase flow field, quantitative correlation of pressure and density of pyrotechnic charges was deduced.
利用气固两相流颗粒间应力与空隙率之间的定量关系，推导了火工药剂压药压力与装药密度之间的定量关系。
It is valuable for CFB desulfurization reactor design optimization to study the gas-solid flow field characteristic in CFB riser.
研究流化床提升管内气固流场分布情况对设计和优化循环流化床脱硫器有重要意义。
In the nature and practical engineering applications, the gas-solid two-phase free shear flows are typical.
在自然界和实际的工程应用中，气固两相自由剪切流动比较典型。
The gas-solid reaction mechanism was studied in the tank reactor. It was found that the reaction rate was controlled by the interdiffusion and intrinsic chemical reaction.
在釜式反应器内研究了氯磺化反应的气固相反应机理，发现气体的内扩散和本征化学反应是氯磺化反应的控制步骤。
The gas-solid reaction mechanism was studied in the tank reactor. It was found that the reaction rate was controlled by the interdiffusion and intrinsic chemical reaction.
在釜式反应器内研究了氯磺化反应的气固相反应机理，发现气体的内扩散和本征化学反应是氯磺化反应的控制步骤。
应用推荐