The results of the numerical simulation will provide a more reliable basis for furthering the optimization of the aerodynamic design of gas solid two phase turbine blades.
数值模拟结果将为进一步优化气固两相透平叶片的气动设计提供更可靠的依据。
The gas solid contact efficiency was improved by adjusting the flow tracks of catalyst.
通过改变催化剂的流动轨迹达到改善气固接触效率的目的。
High temperature gas solid suspension reactor was used to simulate decomposition of cement raw meal.
应用高温气固悬浮实验台对水泥生料在预分解炉中分解动力学的过程进行了模拟实验。
The basic process of gas solid catalytic reaction and rate equation have been discussed in this article.
文章讨论了气固相催化反应的基本过程和速率方程。
Firstly, the pressure distribution of gas solid flow along the circulating route is analyzed and experimentally studied.
分析气固两相流在循环路径中的压力分布，并通过试验对其进行了研究。
From the viewpoint of the flow field distribution features an analysis is conducted of the effect of blade spacing and cover ratio on air flow and gas solid separation.
并从其流场分布特点的角度分析了叶片间距、遮盖度对气流流动及气固分离的影响。
The fractal theory was introduced into the gas solid catalytic reaction system to describe the influence of the surface irregularity of catalyst on the gas solid catalytic reaction.
利用分形维数定量表征催化剂的形状不规则程度，对其中进行的气-固相催化反应进行了分析计算。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
在一个加压喷动流化床装置上进行了冷态实验，研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
The structures of the gas solid two phase flow in the suspension bed were measured by a particle dynamic analyzer (PDA) at different apparent velocities for each of the nozzle structures.
用颗粒动态分析仪(PDA)测量了悬浮床内气固两相流动的结构，确定了不同表观气速和不同进气结构条件下的两相流场的特点。
In this paper, a Gas Solid Solid Circulating Fluidization Reactor (GSSCFR) is studied.
对气固固循环流化反应器进行了研究。
Gas solid two phase flow problems are widely met with in power equipment and numerical simulation methods are often used for studying them.
在火力发电设备中，广泛存在着气固两相流动的问题，用计算机对气固流动进行模拟研究已成为重要手段。
The optical-electrical measurement is an effective and feasible way to measure solid particle concentration and velocity in gas-solid two phase flow.
应用光一电检测方法测量气一固两相流中固体微粒浓度、速度，是一种十分有效和可行的方法。
Cyclone separator is a kind of inertial separator, more for gas-solid separation.
旋风分离器也是一种惯性分离器，较多地用于气固分离。
The paper discusses the principle of PCT testing equipment; the over-all control scheme for the gas-solid reaction controller is decided.
在详细考察国外现有PCT测试装置及其原理的基础上，本文给出了气体-固体反应控制器的整体控制方案。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
In this paper, a dynamic model of the gas-solid two phase flow in magnetically fluidized bed is established first.
本文首先从理论上建立了磁流化床气固两相流动的动力学模型。
In order to intensify the collision among the inhalable particles, a gas-solid jet flow was introduced into the agglomeration chamber to generate a local turbulent flow field.
团聚室中引入气固射流，使团聚室内形成局部湍流，强化颗粒间的碰撞。
Particle velocity is an important parameter describing the flow state of gas-solid two-phase flow.
颗粒的流动速度是反应气固两相流流动状况的一个重要参数。
Theoretical analysis and experimental research on bipolar charging phenomena and electrostatic potential distribution in gas-solid fluidized beds were carried out.
对颗粒的双极带电现象和气固流化床中的静电分布进行了理论分析和实验研究。
A detailed numerical study was conducted of the gas-solid inertial separation process in a circulating fluidized bed.
对循环流化床中气固惯性分离过程进行了详细的数值研究。
In the study of heat transfer in CFB, most researchers focus on the heat transfer between the bed and the wall, few people attach importance to the gas-solid interfacial heat transfer.
在循环流化床内的传热研究方面，大多数研究者从事的是床层与换热表面之间的传热研究，而忽略了床中重要的气固两相间的传热。
It is proved by the results that the performances of ejectors can be dramatically improved by properly selecting the geometrical and operation parameters of gas-solid ejectors.
结果证明：正确选择气固喷射器的几何参数和操作参数，就能大大改善它的性能。
Research about solid particle characters in circulating fluidized bed is very important to study the principle of gas-solid two phase flow.
循环流化床内固相颗粒运动特性的研究对于揭示床内气固两相流机理具有重要意义。
An experimental study of gas-solid distribution characteristics of the cyclone separator was conducted on a gas-solid two-phase flow test rig.
在气固两相实验台上进行了分离器气固分配特性的实验研究。
An artificial neural network model was set up to simulate the hydrodynamics of the gas-solid flow in the gas-solid circulating fluidized bed.
提出了气固循环流化床中气固流动的人工神经网络模型。
Cyclone separator is a kind of equipment that USES rotary motion of gas-solid two-phase fluid to make the solid particle separated from the gas flow by centrifugal force.
旋风分离器是一种利用气固两相流体的旋转运动使固体颗粒在离心力的作用下从气流中分离出来的设备。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
应用推荐