The paper introduced the drag foming, double-sleeve foming and die forming for form conical barrel-type parts.
介绍了圆锥筒形零件的阻力成形法、辅助套筒成形法和模具成形法。
Based on test data, we made a qualitative analysis for feed speed, die form, extrusion components, water quantity and spindle speed.
本文根据试验数据就喂料速度、出料方式、挤压部件、加水量和主轴转速对挤压机性能的影响，作了定性分析。
Keratinocytes form several layers that constantly grow outwards as the exterior cells die and flake off.
角化细胞形成多层细胞层随着最外层的细胞死亡消失不断往外生长。
What lives does not die, rather it is transformed into another form to serve another purpose.
生命不会消亡，它只是转变了存在的方式去完成另一使命。
In practice, of course, a connectome will change over the course of time as new connections form and old ones die.
当然，实际上随着新的神经连接的形成和旧的连接丧失，一个神经连接组会因时而变。
Migratory birds can carry these viruses, in their low pathogenic form, over long distances, but do not usually develop signs of illness and only rarely die of the disease.
候鸟可以低致病性方式远距离携带这些病毒，但通常不显示疾病体征并且很少死于该病。
Even if the slime molds die to form a stalk, many of their genes are passed on to the next generation through their kin.
即使黏菌为形成柄而死亡，它们的很多基因也会通过亲属传给下一代。
Almost half of patients with the multi-drug resistant form of the disease die.
几乎一半的病人有多种药物的耐药现象发生并导致死亡。
Form and dimension may also be achieved by a number of alternative processes such as hot or cold extrusion, sand casting, die casting, and precision casting.
形式和尺寸也可以通过其它一些可选工艺来达到，比如热挤出或冷挤出加工，沙模铸造，拉模铸造，或精密铸造。
Infected rhesus monkeys, which can get sick and die from the primate form of HIV, had high levels of endotoxins in their blood.
受感染的恒河猴，从感染艾滋病病毒到发病、死亡，他们的血液中有较高水平的内毒素。
New cells form when the body does not need them, and old cells do not die when they should.
当身体并不需要时，新细胞形成，衰老的细胞应该死亡但并未死亡。
When this happens, cells do not die when they should and new cells form when the body does not need them.
在这种情况下，细胞应该死亡但并未死亡，身体并不需要时新细胞形成。
Use of materials and putting in top form and die out of the core material of choice.
利用推杆顶料及内抽芯方式并对模具的材料进行了选择。
The fatigue break down is the main form of die failure. To improve the use life of dies, an approach for increasing fatigue resistance of die material is reviewed.
疲劳破坏是模具失效的主要形式，为了提高模具的使用寿命，综述了提高模具材料疲劳抗力的多种途径。
The stress and the main failure form of the cold extruding die for the piston pins were analyzed.
分析了冷挤压活塞销凸模的受力情况和主要失效形式。
Thermal fatigue is one of the primary form of hot-work die steels failures.
热疲劳是热作模具的主要失效形式之一。
And, besides punching holes in steel, such a machine could also be used to form shapes out of the metal without the need to use a mould or a die.
并且，除了给钢打洞外，此机器也可以给金属进行塑形而不需要任何模具。
A structure form of floating matrix core shaft has been adopted in the die for slitting the water pipe of the radiator.
散热器进出水管剖切模采用浮动凹模芯轴结构形式。
Many types of patterns exist that morph in the early generations but soon turn into a still life, or die, or return to their original form and then repeat the process.
大意是，很多模式类型在上一代中存在这种变形，但很快就转变成静止的生命或者死亡，或者回到原先的模式，然后重复这个过程。译者根本没看明白原话的意思。
The vertically float die block and slide plate of combination movement have been adopted in the die to form a ring part on a single stroke of the press with high productivity.
该弯曲模采用浮动模块和复合运动的滑板，使环形零件在压力机一次行程中成形，工作效率高。
The method to form supporting pedestal of railroad lorry by die forging was proposed.
提出了采用模锻工艺成形铁路货车支撑座的方法。
The assembly of MOSFET is consisted of five main processes, which are wafer sawing, die attach, wire bond, molding, trim and form.
MOSFET的封装主要由晶圆切割，晶粒黏贴，焊线，封塑，切割成型这五大流程组成。
This is also preformed on covered surfaces a stacked assembly : substrate - pre - form - die.
在叠层的组装工艺中，比如基板- 焊片-芯片，即使有部分表面被盖住了，这种气氛同样有效。
The results of trial manufacturing and product detection indicate that employing a die forging-drawing process to form the monobloc break beam frame is feasible.
生产试制及产品检验表明，采用“模锻-拉制”工艺成形整体结构的新型制动梁架是可行的。
The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed, and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式，并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟，探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
Roll forgings. In roll forging, a bar stock, round or flat is placed between die rollers which reduces the cross-section and increases the length to form parts such as axles, leaf springs etc.
在滚锻时，圆的或是扁平的棒料放在模辊之间缩小横截面增加长度制成诸如轮轴、板簧之类的零件。
We have seen polyandry change its form till it allowed of kinship through males, and then die away into an obligation on younger brothers in turn to espouse the widow of the eldest brother;
我们看到一妻多夫改变其形式直到允许通过男性的血族关系，随后消失在兄弟们依序娶长兄的寡妇的义务中；
We have seen polyandry change its form till it allowed of kinship through males, and then die away into an obligation on younger brothers in turn to espouse the widow of the eldest brother;
我们看到一妻多夫改变其形式直到允许通过男性的血族关系，随后消失在兄弟们依序娶长兄的寡妇的义务中；
应用推荐