The precise edge detection in range image was the base of 3-D object recognition and localization.
深度图像边缘提取是物体识别和定位的基础。
Line drawing is one of the resources of changing information on 3-D object between man and computer.
线画图是人们之间以及人与计算机之间交换三维物体信息的主要来源之一。
The 3-D object profilometry based on direct fringe displacement analysis is simple, fast and accurate.
基于直接条纹位移分析的三维测量具有简单、快速、精确的特点。
I demonstrate one here with another 3-d object construction function, and then discuss some of the others.
我这里先通过另一个3d对象创建方法来演示其中一个函数，然后再讨论其他函数。
On this basis and for the first time, a theory and implementation of 3-d object restoration has been proposed.
在此基础上，本文首次提出了三维目标复原的理论和实现方法。
Phase detection of projected grating is an effective method which can be used to measure the shape of a 3 D object.
投影栅相位法是检测三维曲面形体几何尺寸的较为有效的光学手段。
The zone reflection characteristic of the smooth bent surface—a special 3 D object is discussed in theory in the paper.
针对一种特殊的三维目标——平滑弯曲表面，从理论上讨论了它的区域反射特性；
Research indicated that this system can be applied in reverse measurement to the dimensions of 2-D object complex edge.
研究结果表明，该系统能够应用于二维复杂平面边缘的反求测量。
The phase error caused by leakage in a 3- D object measurement Fourier transform profilometry (FTP) method is discussed.
讨论了频谱泄漏对傅里叶变换轮廓术测量精度的影响。
Phase-detecting resolution can be improved by raising digits of A/D converter and is independent of the speed of detected object.
通过改变A/D转换器的位数，提高检相分辨率，它与检测对象的运动速度无关。
Texture mapping technique maps texture onto surface of 3-D object, generating no interruption anywhere and having fine resolution.
纹理映射把纹理图像映射到三维物体表面上，在物体各表面上纹理不会变形和间断，而且有很好的分辨率。
Using Finit Ielement Method, a 3-D object was constructed by means of set of deformable edges elastic frame elements with twelve crossed lines.
应用有限元素法，通过十二棱交叉的变态棱线弹性架单元的集合，进行三维实体的造型、调型与表面光滑处理。
Kinect enables video game players to move characters through the use of real-life movements made possible by 3-d object scanning and manipulation.
Kinect通过三维物体扫描和控制使玩家可以通过用户的真实移动来控制角色的位移。
This paper presents the concept and underlying theory for digital holography and its applications in 3-D object reconstruction and optical metrology.
本文从理论和实验两方面详细探讨了数字全息术的原理及其在三维物场再现和全息干涉计量方面的应用。
By the aid of such HOE, the object planes at different distance can be-Imaged into the corresponding channels, Therefore a 3-D object field may be displayed by many 2-D images.
它可以把物方空间沿光轴方向上的不同物距上的物面分别成像在对应的通道上，从而把一个三维物场变为多个二维像进行显示。
In this paper, we first focus on the CAD-based object model construction and then introduce a rule-based method to precompile this geometrical model into a match tree for 3-d object orientation.
集中阐述了基于CAD的物体模型建立过程，并介绍了一种基于规则的将物体几何模型予编译为匹配树的三维物体定位方法。
Tt is suggested in this paper that the calculation of the gravitational anomaly is performed by boundary elements method, curvilinear integral is for 2-D object and surface integral for 3-D object.
本文提出用边界单元法计算重力异常，二维形体用线积分，三维形体用表面积分。
Conceptually, all applications that use D-BUS contain a set of objects, and messages are sent to and from specific objects — not applications — that are identified by an object path.
概念上，所有使用d -BUS的应用程序都包括一组对象，消息发送到或者发送自特定对象——不是应用程序——这些对象由对象路径来标识。
To perform a method on a D-BUS object, you send the object a method call message.
要执行d -BUS对象的方法，您需要向对象发送一个方法调用消息。
Then a minimal D-BUS object is created and every second a signal is broadcast from the object.
然后创建一个最小限度的 D-BUS对象，这个对象每秒广播一个信号。
Note here that on a 32-bit system, the compiler may not align the variable d, even though it is a 64-bit object, because the hardware treats it as two 32-bit objects.
注意，在一个32位的系统上，编译器可能并没有对变量d进行对齐，尽管它是一个64位的对象，这是因为硬件会将其当作两个32位的对象进行处理。
To do this you need to add a "d: DataContext" property to the same object that will get the real data context.
为了达成这一点，需要向接收实际数据上下文的对象增加一个“d：DataContext”属性。
It then turns the design into an object with a 3-d printer and ships it to the customer.
然后公司用3 - D打印机把设计制作成实物并运送给客户。
Once you have that, you can interactively, seamlessly change the view from one camera location to another, and this allows the object to be viewed interactively in 3-d.
一旦拥有这个系统，你能交互无缝的把视角从一个照相机的机位换到另一个机位，这就把物体的影像用3d交互式的显现出来。
The first character of a long listing describes the type of object (d for a directory).
长清单的第一个字母表示对象的类型(d表示目录)。
D profile measurement is a powerful tool for obtaining the form and structure of an object.
三维物体表面轮廓测量是获取物体形态特征的一种重要手段。
In this paper, a TV camera and a 3-D teaching device with four LEDs attached to measured Point on the object are employed to acquire the 3-D information of the measured point.
本文采用单摄像机与3-D示教器（由四个LED构成）组成的仿真三维视觉传感装置来完成空间坐标系中物体的空间位置和姿态的测量。
This will keep the graphical display of the environment on the screen, but discard all information about where each object exists in 3-D space.
这将保持环境的图形显示在屏幕上，但会丢弃所有关于每个对象在三维空间中的位置的信息。
The constant rotation matrix simplifies the algorithm and process of object 3 D position, and it can achieve high accuracy.
使用恒定旋转矩阵使得目标三维定位的算法与标定参数的过程大大简化，同时具有较高的定位精度。
In object identification level object identification fusion based on D-S proof theory was discussed, performance analyzing is found that the arithmetic did not need probability distribution.
在目标识别级重点讨论了基于D - S证据理论的目标识别融合，通过性能分析可知该算法具有不需要先验概率和条件概率密度等优点。
应用推荐