Therefore, the return Angle stiffness can be used as a criterion for evaluating the return safety of tilting trains.
可以把回复角刚度作为衡量车辆回复安全性的指标。
The return angle stiffness of tilting mechanism can be taken to judge the return safety of tilting trains is put forward.
提出了采用摆式列车倾摆机构的回复角刚度来评定摆式列车的回复安全性的方法。
Return angle stiffness describes the stability of car body returning to neutral position when tilting mechanism loses power during the car body tilting.
回复角刚度表述了在倾摆过程中倾摆机构失去动力时，车体回复中位的稳定性。
The results show that the vertical stiffness increases with an increase in air pressure, decreases a little with an increase in cord Angle.
有限元计算结果表明，空气弹簧系统垂向刚度随气体压力的增加而增加，随帘线角的增大而略减小。
The vertical stiffness of the air spring system was calculated, and the effects of air pressure and cord Angle on it were analyzed.
计算了空气弹簧系统的垂向刚度，并分析了气体压力和帘线角对垂向刚度的影响。
Angular stiffness and elastomer shear strain on maximum swinging Angle are important indexes in flexible joint design of solid rocket motor.
角刚度(又称弹性比力矩)及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。
Utilize ANSYS to compute deflection of the each of moldboard stroke in infinite elements' method and then solve the systematical stiffness and the critical Angle of clamping unit.
采用ANSYS软件对前、后固定模板及动模板的挠度进行了有限元计算，进而求解了合模机构的系统刚度及临界角。
This paper introduces a harmful drift Angle to control the lateral stiffness of high-rise structures with transfer storey.
提出采用有害位移角来控制带转换层高层建筑结构的侧向刚度。
The influence of the stiffness variation, the unbalance and the inhabiting angle on the transient response was investigated.
研究了刚度变化、质量偏心以及质量偏心角对裂纹转子瞬态响应的影响。
Returnability is affected mainly by automobile velocity, torsional stiffness of steering system and caster angle and relatively little by viscous friction coefficient of steering system.
汽车车速、转向系统扭转刚度和主销后倾角对回正性能的影响较大，而转向系统的粘性摩擦系数对回正性能的影响相对较小。
The effects of different structural parameters, such as contact Angle, deformation and stiffness and load parameters on bearing mechanical properties were studied.
研究了不同结构参数和载荷参数对滚珠轴承力学特性的影响，得到了滚珠轴承接触角、变形以及接触刚度的变化规律。
The rules of support Angle, stiffness, and damper described in this article can provide good reference for the optimal design of the buffer seat.
综合支撑角度、刚度和阻尼各个参数影响规律，可以得到优化的座椅设计方案。
The stiffness coefficients, cohesion, friction angle are the important parameters in reflecting the mechanical characteristics of the joints.
岩体节理面的刚度系数、黏结力和内摩擦角是反映节理面力学特性的重要参数。
The influences of many contact parameters such as initial normal force, contact angle, contact stiffness and coefficient of friction were obtained.
获得了凸肩接触面初始正压力、接触角度、接触刚度、摩擦系数等多种参数对叶片非线性响应的影响规律。
Then the plan is to give the spacecraft some rotational stiffness about the Y axis so the elevation angle can be controlled easily.
接下来会有一个关于Y轴转动刚度的计划给航空器好让仰角就可以很容易被控制。
In this paper, effect of the dip Angle, stiffness and design depth of bolt on the horizontal displacement of tension anchor supporting structure was carried out by FLAC3D.
利用FLAC3D商业软件对基坑工程拉锚式支护结构的锚杆设计参数(锚杆长度、锚杆倾角、锚杆刚度以及锚杆设置深度)对支护结构水平位移的影响进行了数值模拟。
Set out from the angle of the engineering applying, deduct calculations of air spring vertical stiffness with different guiding accessories.
假设空气弹簧的垂向刚度仅取决于内部气压 ，从工程热力学的气体多变方程出发推导了空气弹簧的垂向刚度。
Attempts were then made to analyze the effects of some key parameters of mooring system configuration, including top Angle, pretension in line and polyester line axial stiffness.
对影响系泊系统的强度和定位能力的几个参数(顶部张角，顶部预张力和轴向刚度)进行了分析研究。
Attempts were then made to analyze the effects of some key parameters of mooring system configuration, including top Angle, pretension in line and polyester line axial stiffness.
对影响系泊系统的强度和定位能力的几个参数(顶部张角，顶部预张力和轴向刚度)进行了分析研究。
应用推荐