目前他们模拟了产生重叠噪音信号的基本回路，基于噪音的与门和或门，还有其他的一些元件。
So far they have simulated basic circuits for generating composite noise signals, as well as noise-based and and or logic gates, among other components.
他的一个长期研究方向是利用纳米元件模拟自然界原理。
One of Strano's long-term research goals has been to find ways to imitate principles found in nature using nanocomponents.
本论文透过有限元素法对压电元件进行模拟与设计分析。
In this thesis, we analyze and design the piezoelectric device by finite element simulation.
本文对飞行模拟器运动系统的静压伺服作动器进行了分析，介绍了系统主要元件的结构原理。
This paper analyzes hydrostatic servo actuator in motion system for flight simulator, and introduces structural principle of main component of the system.
这里采用弹簧边界条件代替接触，模拟工件和夹具元件的接触变形。
Here, contact is replaced by springs whose deformation is used to simulate contact deformation of workpiece and fixture element.
在敏感元件的设计中，本文引入了热堆等效电路模型，从而将热堆和电路混合模拟成为可能。
When we design the thermal sensing elements, the equivalent circuits of thermopiles are being used, which make it convenient to simulate the thermopiles with circuits.
系统地研究了电流传送器在有源网络元件模拟、模拟信号运算和电感模拟电路中的应用，提出了一种基于电流传送器的新型模拟浮地电感。
The simulative circuits of active network elements, analog signal operation and inductors based on current conveyors are systematically researched. A new active floating inductor is proposed.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
本文提出一种只使用两只晶体管和少量RC元件的低耗模拟电感。
This paper presents a simple low loss simulated inductor using only two transistors and a few RC passive elements.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
本文提出以DSP和IGBT为核心来设计数字式可逆励磁调节器，以取代现有的以晶闸管为功率元件的模拟控制的励磁调节器。
This paper presents reversible digital field regulator with DSP and IGBT, which is substituted for current analogue field regulator with thyristors as power element.
模拟有源滤波器能集成化的关键是由于采用了为抵偿制造容差，工作时元件值漂移的自动调节系统。
The analog active filters can be fully integrated for no other reason than that the automatic tuning systems against fabrication tolerances and component value drifts during operation are adopted.
三元件模型能较好地模拟PTT纤维和PET纤维的应力松弛过程。
The relaxations of stress of PTT fibre and PET fibre may be simulated by using a three-element mechanical model.
通过模拟束流的传输过程，观察空间电荷效应对束流产生的影响，进一步对注入系统的元件参数进行适当的优化，从而对束流包络进行控制。
The infection of the space charge was observed by simulating the transmission of the beams, and the parameters of the system were optimized to control the envelope of the beam.
本电参数测试仪通过AT 89 C51单片机作为核心的控制元件，由模拟开关hcf 4051构成自动量程数字万用表。
Abstrct: the electrical parameters Tester through AT89C51 SCM as a core element of control by the analog switch HCF4051 constitute a range digital multimeter.
结果三弹性腔九元件集中参数模型模拟出的输入阻抗模和幅角与目标输入阻抗模和幅角能较好的吻合。
G. Fung et al. Results the modulus and phase simulated by the nine-element lumped parameter model could fit the goal input impedance well.
但传统的直流调速系统所采用的是由分立元件构成的复杂PID模拟控制系统，在可靠性和灵活性以及控制性能都存在不足。
Traditional DC timing system is based on complex PID simulation control system which is composed of schism components, so it has deficiency on reliability, flexibility and control ability.
运用模拟试验方法，探讨了铸轧辊内冷水槽结构型式、冷却水流参数、在冷却水槽内设置扰流元件对铸轧辊强化内冷冷却效果的影响规律。
The effects of the structural shapes of inner cooling slots, flowing parameters of inner cooling fluid on the inner cooling of the roller were studied with simulating experiment.
用有源器件构成的有源模拟电感代替蔡氏电路中的电感元件可以产生混沌而不影响其性能。
Active simulated inductances, which replace simulated parts in Cais circuit, can produce Chaos, but not affect the property.
导出了电力系统中的支路元件和节点元件开断模拟的补偿公式。
The compensation formulae for outage simulation of both branch and node components in the power system are derived.
用模拟电子元件和数字电子元件设计一种智能开关盒，介绍这种装置的作用和工作原理。
An intelligence switch box is designed by use of analogue electronic elements and digital electronic elements. The paper introduces the functions and working principle of the device.
SCSP的焊点热疲劳寿命模拟值为1 052个循环周，低于单芯片封装元件的焊点热疲劳寿命(2 656个循环周)。
The simulation value of solder joint thermal fatigue life is 1 052 circulations. The thermal fatigue life of solder joint in SCSP is lower than the single chip package (2 656 circulations).
采用蒙特卡洛方法对可维修系统的故障率进行模拟，讨论了元件的抽样方法。
Monte Carlo method is used to simulate the failure rate curve of repairable system, the sample method of the component is discussed.
讨论了数字电路的逻辑级模拟中元件传输延迟模型、元件状态值模型的建立，逻辑模拟的算法以及元件计算的方法。
Discuss the three aspets of the logical-level simulation theory of digital circuits: the construction of delay model and multi-state model, simulation algorithms, and methods of component computation.
为了解抉这个问题，介绍了一种将遗传算法与模拟退火算法相结合的混合遗传算法，并具体地利用这一优化算法设计了一种常用的二元光学元件——达曼光栅。
In order to solve this problem, a new method is provided based on the Hybrid Genetic Algorithms, and using a emulation program design a common binary optics elements-Dammann Grating.
提出一种采用模拟乘法器和模拟积分器作为基本元件构成功率方向继电器的方案。
A project to design a power direction relay, which is based on an analog multiplier and an analog integrator, is presented in this paper.
联接槽身和支架的盆式橡胶支座采用弹性元件单元模拟。
The rubber supports with basin shape linking the brace and the aqueduct body are simulated by using spring elements.
联接槽身和支架的盆式橡胶支座采用弹性元件单元模拟。
The rubber supports with basin shape linking the brace and the aqueduct body are simulated by using spring elements.
应用推荐