模拟元件会造成信号失真和噪声。
The analogue components would cause signal distortion and noise.
本论文透过有限元素法对压电元件进行模拟与设计分析。
In this thesis, we analyze and design the piezoelectric device by finite element simulation.
他的一个长期研究方向是利用纳米元件模拟自然界原理。
One of Strano's long-term research goals has been to find ways to imitate principles found in nature using nanocomponents.
这里采用弹簧边界条件代替接触,模拟工件和夹具元件的接触变形。
Here, contact is replaced by springs whose deformation is used to simulate contact deformation of workpiece and fixture element.
本文提出一种只使用两只晶体管和少量RC元件的低耗模拟电感。
This paper presents a simple low loss simulated inductor using only two transistors and a few RC passive elements.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
每个存储器元件可存储以模拟或数字形式表示的数据。
Each memory element can store data represented in analog or digital form.
即使数字元件也有越来越多的模拟内容。
Even with digital components there is growing analog content.
在敏感元件的设计中,本文引入了热堆等效电路模型,从而将热堆和电路混合模拟成为可能。
When we design the thermal sensing elements, the equivalent circuits of thermopiles are being used, which make it convenient to simulate the thermopiles with circuits.
本文提出以DSP和IGBT为核心来设计数字式可逆励磁调节器,以取代现有的以晶闸管为功率元件的模拟控制的励磁调节器。
This paper presents reversible digital field regulator with DSP and IGBT, which is substituted for current analogue field regulator with thyristors as power element.
三元件模型能较好地模拟PTT纤维和PET纤维的应力松弛过程。
The relaxations of stress of PTT fibre and PET fibre may be simulated by using a three-element mechanical model.
但传统的直流调速系统所采用的是由分立元件构成的复杂PID模拟控制系统,在可靠性和灵活性以及控制性能都存在不足。
Traditional DC timing system is based on complex PID simulation control system which is composed of schism components, so it has deficiency on reliability, flexibility and control ability.
分析了模拟电压一频率比变换电路原理,给出了元件参数的设计要求及其计算方法。
After the analyses of circuit theory of analogue voltage-to-frequency ratio converter, the design requirement of component parameters and the calculation method are presented.
用有源器件构成的有源模拟电感代替蔡氏电路中的电感元件可以产生混沌而不影响其性能。
Active simulated inductances, which replace simulated parts in Cais circuit, can produce Chaos, but not affect the property.
通过模拟束流的传输过程,观察空间电荷效应对束流产生的影响,进一步对注入系统的元件参数进行适当的优化,从而对束流包络进行控制。
The infection of the space charge was observed by simulating the transmission of the beams, and the parameters of the system were optimized to control the envelope of the beam.
用模拟电子元件和数字电子元件设计一种智能开关盒,介绍这种装置的作用和工作原理。
An intelligence switch box is designed by use of analogue electronic elements and digital electronic elements. The paper introduces the functions and working principle of the device.
SCSP的焊点热疲劳寿命模拟值为1 052个循环周,低于单芯片封装元件的焊点热疲劳寿命(2 656个循环周)。
The simulation value of solder joint thermal fatigue life is 1 052 circulations. The thermal fatigue life of solder joint in SCSP is lower than the single chip package (2 656 circulations).
采用蒙特卡洛方法对可维修系统的故障率进行模拟,讨论了元件的抽样方法。
Monte Carlo method is used to simulate the failure rate curve of repairable system, the sample method of the component is discussed.
导出了电力系统中的支路元件和节点元件开断模拟的补偿公式。
The compensation formulae for outage simulation of both branch and node components in the power system are derived.
联接槽身和支架的盆式橡胶支座采用弹性元件单元模拟。
The rubber supports with basin shape linking the brace and the aqueduct body are simulated by using spring elements.
设计了液压负载模拟系统中的关键元件旋转式换向阀,建立了其数学模型和仿真模型,并仿真分析其关键参数对液压负载模拟系统的影响规律。
The rotation directional valve, key component of the system, is developed. Influence principles of structural parameters are analyzed based on the mathematical and simulation model.
Fairchild是全球主要的高性能半导体产品的供应商,销售市场包括电源、接口元件、模拟、混合讯号、逻辑元件、光电组件产品等。
Fairchild is the leading global supplier of high performance semiconductor products in the power, interface, analog, mixed signal, logic and optoelectronic products markets.
此范例程序会模拟负载测试元件中真正使用的通讯端连线呼叫集合。
This sample program simulates the exact set of socket connection calls that are used in the load testing components.
系统地研究了电流传送器在有源网络元件模拟、模拟信号运算和电感模拟电路中的应用,提出了一种基于电流传送器的新型模拟浮地电感。
The simulative circuits of active network elements, analog signal operation and inductors based on current conveyors are systematically researched. A new active floating inductor is proposed.
讨论了数字电路的逻辑级模拟中元件传输延迟模型、元件状态值模型的建立,逻辑模拟的算法以及元件计算的方法。
Discuss the three aspets of the logical-level simulation theory of digital circuits: the construction of delay model and multi-state model, simulation algorithms, and methods of component computation.
讨论了数字电路的逻辑级模拟中元件传输延迟模型、元件状态值模型的建立,逻辑模拟的算法以及元件计算的方法。
Discuss the three aspets of the logical-level simulation theory of digital circuits: the construction of delay model and multi-state model, simulation algorithms, and methods of component computation.
应用推荐