直接剪切试验更准确地模拟了垃圾团间的滑动摩擦特性,用直接剪切试验确定垃圾土的强度参数更合理;
The direct shear tests are more accurate in simulating friction behavior between blocks of solid waste feasible to determine the strength parameters of solid waste.
纤维的吸水特性有助于保持皮肤干爽凉快,为避免摩擦力和剪应力的伤害提供了进一步的保护。
Absorbency properties in the fabric help keep the skin dry and cool, providing further protection against friction and shear.
给出了摩擦力模型和电液伺服马达的静态特性。
Friction models and static characteristics of electrohydraulic servo motors are given in this paper.
了解和掌握含稀土材料的摩擦学特性及稀土元素在其中的作用机制具有重要的意义。
It is important to understand the tribological characteristics of rare earth materials and the role of rare earth element.
对改良的干法压裂液这种非牛顿流体的摩擦阻力特性的正确认识,关系着干法压裂技术的有效实施。
Whether we can correctly understand the frictional resistance characteristics of the modified dry fracturing fluid or not would influence the fracture technology's effective implementation.
结合生产实践分析了由于摩擦阻力而形成的翻板式锁气阀所固有的特性及其影响因素。
Together with the practical application of the panel turnover gas-lock valve, the factors of the inherent character with the friction effect are also given in this paper.
用BP人工神经网络建立了重载丝杆螺母副的摩擦学特性与载荷之间关系的磨损自补偿数学模型。
The BP neural network used the wear-self-compensation mathematics model of the relationship of tribology characteristic with load of the heavy load screw-nut pairs was established.
分别以油气、气水为工质,对立式螺旋管内气液两相流的摩擦阻力特性进行实验研究。
With oil, gas, water as working fluids, the experiment studies of frictional pressure drop characteristics of oil gas, gas water two phase flow in vertical helically coiled tubes were carried out.
以常压去离子水为工质,对自然循环工况下上升加热段内单相水的摩擦阻力及对流传热特性进行了实验研究。
The friction and convective heat transfer of single phase water flow in a vertical heated tube at natural circulation condition were experimentally investigated.
综合大量事实,本文指出表土深部的厚粘土层存在着地压高、不冻结、塑性变形显著、摩擦阻力大等工程特性。
A great deal of evidence has indicated that deep-thick bedded clay has engineering properties which are high earth pressure, non-frozen, distinct plastic deformation, great lateral resistance.
对驻波马达的驱动机制进行了细致的分析,从理论上得到各种预压力情况下马达的最佳驱动状态,并定性分析了马达在摩擦力驱动下的驱动特性。
The driving mechanism of the standing wave motor is analyzed in detail, the optimal driving status in various pressures is obtained, and its diving character is given qualitatively.
FU链运机是利用散状物料具有的内摩擦力和侧摩擦力的特性,进行输送物料的。
FU chain conveyor can transporting particle material by using the properties which the material has the friction and side press force.
采用迭代算法计算了静态垂直特性,即垂直刚度、印迹长度及摩擦力在纵向的分布。
An iterative algorithm is used to work out the vertical properties, including vertical stiffness, contact length and frictional force distribution in longitudinal direction.
本文通过在最新研制的MMU—5型试验机上的大量试验,得出了在该机上进行摩擦学特性实验研究的标准试验条件。
In this paper, through a lot of experiments on the new Model MMU - 5 tester, a set of standard conditions for the experimental study on tribology characteristics of the tester are obtained.
利用球盘磨损试验机和电化学综合测试仪研究了IBED膜层的摩擦学性能和电化学腐蚀特性。
The wear resistance and electrochemical corrosion properties of IBED coatings were investigated with ball-on-disk wear tester and electrochemical equipment, respectively.
对煤油在内螺纹管中的单相紊流传热和摩擦阻力特性进行了实验研究,并将实验结果同煤油在光管中的实验结果作了比较。
Experiments on heat transfer and frictional pressure drop of kerosene of single phase flow in the internally ribbed tube were conducted and compared with those of smooth tube.
着重介绍了改善钢表面摩擦学特性的方法和提高离子束加工效率的途径。
The methods for improving the tribology characteristics of the steel surface and increasing the efficiency of ion beam processing are studied.
加筋土结构的设计需要了解筋土界面特性,其中筋土界面摩擦力的大小及变化是进行结构稳定分析最重要的参数。
We should know the interface characteristics of reinforced soil to design the frame of it. The most important parameter is the magnitude and change of friction.
文摘:系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
Abstract: The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
通过对典型轿车钢板表面形貌的分析,以形貌与其摩擦学性能的关系为出发点,对粗糙表面、粗糙峰和粗糙谷的分布特性进行了统计分析。
The distributions of surface height, surface asperity and valley number of various sedan steel plates were analyzed by correlating the surface profile features with the tribological behavior.
在销盘式试验机上对氟塑料合金(F50 - 1)的高温摩擦学特性进行了试验研究。
The tribological characteristics of Fluosopolymer alloy (F50-1) at high temperature were experimentally studied with a pin-disc-type apparatus.
本文提出了既能正确反映摩擦力特性又便于编程的连续型指数摩擦力模型。
This paper presents a sequential exponential friction model which describes not only the friction characteristics correctly but is also convenient for computer programming.
除具有普通的改性聚酯漆包线的特性外,还具有较小的表面摩擦系数的性能。
Low coefficient of surface friction, besides properties of general modified polyes enameled round copper wire.
对V形密封在整个工作寿命中,轴向挤压应力、轴向压力分布、摩擦力等特性变化进行实验研究。
The variation laws of wearing character on V - packing are studied in the whole working life. The wearing character include the friction force, axial extrusion stress and axial pressure distribution.
岩体节理面的刚度系数、黏结力和内摩擦角是反映节理面力学特性的重要参数。
The stiffness coefficients, cohesion, friction angle are the important parameters in reflecting the mechanical characteristics of the joints.
根据铝活塞材料的晶体结构特点,巧妙地利用化学热处理方法,改善了活塞在气缸内运动时的摩擦学特性。
Considering the crystal structure characteristics, improving the piston tribological property during the operation in cylinder was reached by using chemical heat treatment skillfully.
根据摩擦学原理,采用动态磨损模拟试验和表面微观分析研究的方法和技术,对气门动态磨损特性进行了系统的试验研究。
The wear properties of valve are systemically investigated by using dynamic simulation testing and surface microscopic analysis techniques based on principle of tribology.
试验中间测定了涂层的密度,硬度,抗 弯强度,结合 强度以及摩擦学特性,并着重探讨了实用性。
The density, hardness, bending strength, adhesive strength and ttibogy characteristic of the coating are measured in the test and the practical value is studied.
试验中间测定了涂层的密度,硬度,抗 弯强度,结合 强度以及摩擦学特性,并着重探讨了实用性。
The density, hardness, bending strength, adhesive strength and ttibogy characteristic of the coating are measured in the test and the practical value is studied.
应用推荐