The InductoScan? Modular induction heating systems unique design allows for a wide range of induction power supplies, controls and components to be integrated on to a common base.
型号的感应加热系统独特的设计理念，使感应电源，控制器和零件融合到一个共同的平台。
The third possibility for wireless power is magnetic induction - the most attractive option for beefy domestic applications.
无线电力的第三种可能性是磁感应——对于大型家用电器最具吸引力。
Power is transferred to each device by direct contact rather than via a magnetic field and induction.
这样就能直接给设备供电，无需借助磁场和感应电流。
Induction loops are also used to power hearing-aid implants without the need for troublesome wires.
感应圈还被用于启动助听器植入物，而不需要那烦人的金属丝。
An induction loop is used to power the device and to relay data from the lens to a receiver worn by the patient.
感应圈被用于启动该装置，并用于将镜片里的数据传输到患者配戴的接收器上。
The power unit for driving the machines is a 50-hp induction motor.
驱动这些机器的动力装置是一台50马力的感应电动机。
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
So adopting IGBT to realize high power induction heating power is a wise choice.
因此采用IGBT来实现大功率感应加热电源是明智的选择。
Load matching is intended to make induction heating power to the rated output power, and improve efficiency.
负载阻抗匹配的目的是为了使感应加热电源能够输出额定功率、提高效率。
This system can also deliver power to the car's internal lighting and electronics through wireless induction, so no physical tether is needed.
通过无线感应，该系统还为电梯内部的照明以及电子产品提供电力，无需再使用物理牵引缆线。
In this paper, the basic induction heating power load matching a brief analysis.
本文对感应加热电源的基本负载匹配方法做了简要的分析。
Induction heating system elements, including induction coil, an AC power source and the workpiece.
感应加热系统的基本组成包括感应线圈、交流电源和工件。
Comparing with the other traditional heating equipments, induction heating power supply has tremendous advantage, and has an extremely extensive application in the industrial production now.
相比较传统的加热设备，感应加热电源具有极大的优势，在现在的工业生产中有着极为广泛的应用。
Power supply for induction heating is an equipment to heat the workpiece by whirling current and it is applied widely in industry because of its many virtues.
感应加热电源是利用电涡流对工件加热的一种装置，由于具有诸多优点而在工业中得到了广泛的应用。
Medium frequency high power induction heating apparatus, for many years has adopted silicon controlled as switching devices.
中频大功率感应加热装置，多年来一直采用可控硅做为开关器件。
In this paper, principle of design and study of three-phase induction motor power measuring device is discussed in theory and practice.
本文从理论和实践方面探讨了矿用三相异步电机功率测量装置的设计及研制原理。
In some induction heating process, induction coil is connected with power source through connecting power cable.
在某些特殊工艺的感应加热中，感应线圈需要通过延伸电缆与电源连接。
A novel induction heating power based on current hysteresis band control and SVPWM modulation technology is introduced in this paper.
介绍了一种新颖的基于电流滞环和空间电压矢量调制(SVPWM)技术的电压、电流双闭环感应加热电源。
The series resonance circuit is simple, its start easy and resonance-frequency high. It is suitable in small power induction heating supply.
串联谐振电路简单、启动容易、谐振频率高，适应于小功率感应加热电源系统。
The paper presents a novel ultra-audio frequency (UAF) induction welding power based on ZCS-PWM(Zero Current Switching-Pulse Width Modulation) technology.
介绍一种基于ZCS-PWM（零电流开关-脉宽调制）技术的新型超音频感应焊接电源。
A medium frequency induction heating power source controlled by the microprocessor can not be run normally, in case its synchronous signals are disturbed by the harmonic from common network.
由于同步信号受电网谐波的干扰，常使微机控制的中频感应加热电源不能正常运行。
The power factor of wound induction motor drives with cascade control is analysed systematically.
本文对绕线式感应电机串级调速系统的功率因数进行了系统的分析。
The model of induction heating power for unit volume of plate-form part with big flakiness ratio was obtained.
研究了电磁成形大宽厚比板状件的感应加热特性，推导了电磁成形大宽厚比板状件单位体积感应加热功率公式。
The bottom of the high-power commercial Induction Cooker is the cooling system of air imported equipment, must ensure there is no plug anytime.
大功率商用电磁炉底部是使系统冷却设备的空气入口，必须保证供应空气没被挡碍的物品堵住。
As a result, the generating action of the induction machine will cause the power flow to reverse and the kinetic energy of the drive system will be fed back to the supply.
结果，由于感应电动机为发电机，功率流将反向，拖动系统的动能将被反馈回电网。
Since the invention of the induction heating power supply, it has been rapidly applied to the every area of national production for its advantages in the industrial heat treatment.
自从感应加热电源问世以来，由于其在工业热处理等方面的各种优点，迅速地应用到了国民生产的各个领域。
To ensure smooth flow of air, keep the space behind a high-power commercial Induction Cooker outlet at least 10mm.
大功率商用电磁炉出风口后面的空间必须保证大于10 MM的距离，以保证空气排出畅通无阻。
Electromagnetic induction heating circuit design includes power circuit, control circuit, oscillations and driving circuit modules expounded on the circuit design.
电磁感应加热电路设计包括功率电路、控制电路、振荡和驱动电路等单元，阐述系统的电路设计。
In the second chapter, it has introduced the super-frequency induction heating power supply in detail, including its rectifier, its inverter and its parallel-resonant load.
第二章对超音频感应加热电源做了详细的技术分析，包括它的整流电路、逆变电路和并联谐振槽路。
In the second chapter, it has introduced the super-frequency induction heating power supply in detail, including its rectifier, its inverter and its parallel-resonant load.
第二章对超音频感应加热电源做了详细的技术分析，包括它的整流电路、逆变电路和并联谐振槽路。
应用推荐