为类似结构加工刚度分析提供借鉴并具有一定的工程实践价值。
The paper has some engineering value and can be used for reference in similar analysis.
对轿车的刚度分析有一定的参考价值。
本文将根据膜片联轴器的受力状况,对其进行应力分析和刚度分析。
This report concerns the analysis of the strength and stiffness of the diaphragm coupling in terms of the bearing state which acts on such coupling.
结合具体的高速圆柱滚子轴承给出了刚度分析结果及其与实测结果的比较。
Finally, the results of stiffness analysis and experiments completed on a high-speed cylindrical roller bearing were given in the paper.
国内外各大汽车公司对轿车白车身的结构静态刚度分析计算一直非常重视。
The white car body structure of the static stiffness of the field of computing has been valued by domestic and foreign automobiles industry.
通过车身结构刚度分析及车架承载度分析,全面评价车身结构的整体特性。
General characteristics of body structure was appreciated by analyzing body structural stiffness and the load bearing ratio of frame.
针对一种新型压电舵机的微位移放大机构,提出一种基于刚度分析的设计方法。
A design method of micro-displacement amplifier in a novel piezoelectric servo was proposed based on stiffness analysis of flexure hinges.
刚度分析用有限元法完成 ,其中采用了一种考虑横向剪切影响的三角形单元。
The stiffness analysis is performed by the finite element method, in which a triangular element considering the transverse shear effects is used.
工程实际中,常采用各种形式的连续梁,对连续梁进行刚度分析时,需要计算其弯曲变形。
Various continual beams are used in engineering. The calculation of bending deflection is always required in analyzing stiffness of the continual beams.
并运用有限元理论对普通车床尾架体进行了刚度分析,对目前使用的不合理结构提出了改进措施。
Based on the stiff analysis of lathe's tailstock by the theory of finite element, the measure has been put forward to improve the unreasonable structure used at present.
本文在均匀化方法的基础上,通过层合结构的均匀化基元,建立相应的有限元方法,对层合板进行损伤刚度分析。
By this method, combining with the finite element method, the homogenized mixing unit cell is solved to perform damaged stiffness analysis.
利用ANSYS有限元分析软件对所设计的结构进行了强度和刚度分析,结果表明所提出的机械结构是合理可行的。
Then ANSYS is used to analyze the stiffness and intensity of the structure which is designed, the result of which shows that the mechanical structure is reasonable.
最后,设计半空心自冲铆接机的C型铆接框架,应用ANSYS有限元软件对其进行强度和刚度分析,保证设计的合理性。
Finally, the C-frame of semi-tubular SPR Machine for SPR was design and analyzed in respect of strength and stiffness with ANSYS software to ensure the rationalization.
在有限元计算过程中,可通过优化节点编号来减少整体刚度矩阵的带宽,从而节约存储空间,减少有限元分析的计算时间。
In finite element analysis, the bandwidth of the whole stiffness matrix is reduced by optimizing the node numbering, thereby the needed memory space is saved and the calculation time is reduced.
建立了两级星型齿轮传动系统的非线性动力学分析模型,模型中考虑了系统的综合啮合误差、时变啮合刚度以及齿侧间隙。
A dynamic analysis model in which the gear error and the time-varying stiffness and backlash are included is established for a 2-stage star gear train.
以此为理论基础,开发出了简明实用的双横臂扭杆悬架系统刚度和阻尼参数非线性分析与设计软件。
Based on the above study, a useful software for analyzing and designing the rigidity and damping parameters of the suspension system is developed.
基于“挠度法”,对节点刚度进行了测试。根据测试结果,分析了影响节点刚性的各种因素。
Tested the joint stiffness based on "deflection method", and analyzed the factors that affect joint stiffness according to the test results.
基于列车脱轨能量随机分析理论,提出了预防列车脱轨的桥梁横向刚度限值分析方法。
Based on energy random analysis theory for derailment, a new method to analyze the limit value of bridge lateral rigidity for derailment prevention is established.
通过分析端面结构参数对密封开启力和液膜刚度的影响规律,可得到端面结构的优化参数。
Seal face geometry parameters can be optimized by analyzing regulation of their effect on opening force and liquid film stiffness.
通过对混凝土塔壁和钢锚箱抗拉刚度的分析,推导出了各构件拉力分配公式。
Through analysis the tensile stiffness on concrete pylon wall and steel anchorage box, the formula about tension distributing of various component are induced.
建立了考虑转子转速的新的碰磨力模型,分析了具有初始弯曲和刚度不对称转子系统的碰磨响应,得到了系统参数对系统分叉和混沌响应的影响。
A new model of rub impact force considering varied rotating speed was derived and the rub impact response of a rotor system with initial bending and asymmetric stiffness was analyzed.
基于列车脱轨能量随机分析理论,提出新的铁路桥梁横向刚度限值分析方法。
Based on energy random analysis theory for derailment, a new method for analyzing the limit value of bridge lateral rigidity for derailment prevention is established.
带裂缝工作阶段的短期刚度和挠度分析。
The analysis on short-term stiffness and short-term deflection at inelastic stage with cracks.
文中对钢丝滚道轴承的承载能力进行了校核,对主要结构件的刚度进行了分析计算。
The paper tests bearing capacity of steel wire rolls track bearing, analyzes and calculates rigidity of principal structure.
本文应用相似理论,分析抓斗结构的强度、刚度、稳定性的相似原理。
Applying the similarity theory, this paper analyses the principle of similitude of strength, rigidity and stability of the grab.
为了提高AD 250铰接式自卸车的平顺性,对其平衡悬架夹层橡胶弹簧的刚度进行了分析和优化。
The ride comfort of AD250 articulated dump truck is improved through analysis and optimization of the stiffness of laminated rubber spring in balanced suspension.
理论分析与实测结果表明,该测力仪同时具有很高的刚度和灵敏度,并且有安装方便、不影响机床原有特性的特点。
Theoretical analyses and calibration results show that it has both high sensitivity and high rigidity. Besides, it is easy to mount and has no influence on the machine performance.
本文详细地分析了囊体结构的非线性变形过程及刚度矩阵出现奇异的原因;
This paper analyzes the nonlinear deformational process of the envelop structure and the cause of stiffness matrix singularity in details.
分析表明,临界刚度比是索网结构动力响应计算的一个关键参数。
The analysis indicates that the critical stiffness ratio is a key parameter in calculating the dynamic response of cable network structures.
采用CAE技术,对某发动机连杆多种方案进行强度、刚度对比分析,选出最优设计方案,最终达到减轻连杆重量、降低连杆制造成本的目的。
The intensity and stiffness for a few designed project are analysed with CAE technology, and the best project from them is chosen, so as to reduce the weight and cost.
应用推荐