层土中桩端刚度分析的数例说明了这一方法的适用性。
Numerical examples for the stiffness analyses of the pile in layered soil definitely confirm the above conclusions.
本文将根据膜片联轴器的受力状况，对其进行应力分析和刚度分析。
This report concerns the analysis of the strength and stiffness of the diaphragm coupling in terms of the bearing state which acts on such coupling.
结合具体的高速圆柱滚子轴承给出了刚度分析结果及其与实测结果的比较。
Finally, the results of stiffness analysis and experiments completed on a high-speed cylindrical roller bearing were given in the paper.
国内外各大汽车公司对轿车白车身的结构静态刚度分析计算一直非常重视。
The white car body structure of the static stiffness of the field of computing has been valued by domestic and foreign automobiles industry.
通过车身结构刚度分析及车架承载度分析，全面评价车身结构的整体特性。
General characteristics of body structure was appreciated by analyzing body structural stiffness and the load bearing ratio of frame.
针对一种新型压电舵机的微位移放大机构，提出一种基于刚度分析的设计方法。
A design method of micro-displacement amplifier in a novel piezoelectric servo was proposed based on stiffness analysis of flexure hinges.
刚度分析用有限元法完成 ，其中采用了一种考虑横向剪切影响的三角形单元。
The stiffness analysis is performed by the finite element method, in which a triangular element considering the transverse shear effects is used.
工程实际中，常采用各种形式的连续梁，对连续梁进行刚度分析时，需要计算其弯曲变形。
Various continual beams are used in engineering. The calculation of bending deflection is always required in analyzing stiffness of the continual beams.
并运用有限元理论对普通车床尾架体进行了刚度分析，对目前使用的不合理结构提出了改进措施。
Based on the stiff analysis of lathe's tailstock by the theory of finite element, the measure has been put forward to improve the unreasonable structure used at present.
本文在均匀化方法的基础上，通过层合结构的均匀化基元，建立相应的有限元方法，对层合板进行损伤刚度分析。
By this method, combining with the finite element method, the homogenized mixing unit cell is solved to perform damaged stiffness analysis.
利用ANSYS有限元分析软件对所设计的结构进行了强度和刚度分析，结果表明所提出的机械结构是合理可行的。
Then ANSYS is used to analyze the stiffness and intensity of the structure which is designed, the result of which shows that the mechanical structure is reasonable.
最后，设计半空心自冲铆接机的C型铆接框架，应用ANSYS有限元软件对其进行强度和刚度分析，保证设计的合理性。
Finally, the C-frame of semi-tubular SPR Machine for SPR was design and analyzed in respect of strength and stiffness with ANSYS software to ensure the rationalization.
刚度参数为龙门加工中心白勺刚度设计提供了定量参考，求解过程为同类机床白勺刚度分析提供了一种简捷可行白勺方法。
Those stiffness parameters provided confirmable consult for gantry frame machining center design. The process gives a simple method for the same type machine tool's stiffness analysis.
以此为理论基础，开发出了简明实用的双横臂扭杆悬架系统刚度和阻尼参数非线性分析与设计软件。
Based on the above study, a useful software for analyzing and designing the rigidity and damping parameters of the suspension system is developed.
通过分析端面结构参数对密封开启力和液膜刚度的影响规律，可得到端面结构的优化参数。
Seal face geometry parameters can be optimized by analyzing regulation of their effect on opening force and liquid film stiffness.
基于“挠度法”，对节点刚度进行了测试。根据测试结果，分析了影响节点刚性的各种因素。
Tested the joint stiffness based on "deflection method", and analyzed the factors that affect joint stiffness according to the test results.
本文详细地分析了囊体结构的非线性变形过程及刚度矩阵出现奇异的原因；
This paper analyzes the nonlinear deformational process of the envelop structure and the cause of stiffness matrix singularity in details.
建立了考虑转子转速的新的碰磨力模型，分析了具有初始弯曲和刚度不对称转子系统的碰磨响应，得到了系统参数对系统分叉和混沌响应的影响。
A new model of rub impact force considering varied rotating speed was derived and the rub impact response of a rotor system with initial bending and asymmetric stiffness was analyzed.
所述分析方法可推广到其它直线桁梁的抗剪刚度的计算。
This method can be used in other shear stiffness calculations for straight line truss.
通过分析得出了被加固梁最佳支承刚度的计算方法，以及与其对应的最大承载力的计算方法。
This paper gives a method of calculating the optimum support rigidity of the reinforced beam and calculating the corresponding greatest bearing capacity.
分析结果表明该支架系统的强度、刚度及稳定性均满足要求。
The analytical results show that the strength, rigidity and stability of the support system meet the requirements.
依据这一模型，分析了单轴压缩时岩石破坏阶段声发射特性与压机刚度的关系。
The relation between AE characteristics during rock failure and machine stiffness is analysed under uniaxial compression with the above model.
运用结构力学的矩阵分析法和计算机对抽芯作业车主体金属结构做了力学分析与计算，进而校核主体金属结构的强度、刚度和稳定性。
Mechanical analysis and calculation of the truck's metal construction are made by the matrix method, and the strength, rigidity and stability of the metal construction are checked.
而且奇异单元刚度矩阵中的各元素可以用较简单的分析式表出。
Furthermore, each element in the singular stiffness matrix can be expressed by some more simple analytic formulas.
根据承力密封框的使用环境和设计要求，确定了对其进行刚度和强度分析时所需的各种主要参数；
Simultaneously all the main parameters are determined according to the environment of fuselage airproof main frame and the design requirements in analyzing the rigidity and strength.
把复模态分析法推广到刚度矩阵可以奇导且质量矩阵、阻尼矩阵和刚度矩阵均不必为对称的情形。
The complex modal analysis method is generalized to the cases in which stiffness matrix may be singular and mass matrix, damping matrix and stiffness may be nonsymmetric.
分析了刚度和阻尼的变化对车辆平顺性的影响。
The influence of variation of stiffness and damping on vehicle ride performance is analyzed.
分析了低刚度薄壁零件的工艺刚度特征及其加工过程的受力变形特性，提出了实现低刚度薄壁零件精密加工的技术途径。
The process rigidity character of low rigidity thin wall parts was analyzed. The technology pathway of precision machining for low rigidity thin wall parts was brought forward.
计算了空气弹簧系统的垂向刚度，并分析了气体压力和帘线角对垂向刚度的影响。
The vertical stiffness of the air spring system was calculated, and the effects of air pressure and cord Angle on it were analyzed.
计算了空气弹簧系统的垂向刚度，并分析了气体压力和帘线角对垂向刚度的影响。
The vertical stiffness of the air spring system was calculated, and the effects of air pressure and cord Angle on it were analyzed.
应用推荐