Based on analysis of the principle of substrate current of MOSFETs, a new hot carriers resistant structure of CMOS digital circuits is proposed.
本文在分析MOSFET衬底电流原理的基础上，提出了一种新型抗热载流子退化效应的CMOS数字电路结构。
Degradation characteristics of gate current and substrate current during stress are studied, and an accurate analytic degradation model of gate current is presented.
深入研究了热载流子退化过程中栅电流和衬底电流的退化规律，并建立了一个准确的栅电流退化解析模型。
Electroplating is an electrochemical process by which metal is deposited on a substrate by passing a current through the bath.
电镀是一种在电镀槽通上电流使金属沉 淀在基体上的电化学过程。
Various MOSFET tests require making low current measurements. Some of these tests include gate leakage, leakage current vs. temperature, substrate to-drain leakage, and sub-threshold current.
各种MOSFET测试都要求进行弱电流的测量。这些测试包括栅极漏电、泄漏电流与温度的关系、衬底对漏极的漏电和亚阈区电流等。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
For isolated LDMOS devices, the resistance between the lateral isolation wall (32) (tied to the source) and the buried layer (24) is reduced, thereby reducing substrate injection current.
对于隔离的LDMOS器件，横向隔离壁(32)(结合至源极)与埋层(24)之间的电阻减少，从而减少了衬底注入电流。
The main techniques used to decrease static power are:reduce current from substrate and mosfet gate.
减少静态功耗的主要技术是降低衬底电流和栅电流等。
And the relationship between time and substrate concentration in each compartment of ion exchange and current efficiency is discussed.
并对各室对应物的浓度以及电流效率与时间的关系进行了探讨。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
Influence of the cathode electric current density, the agitating methods, the concentration and size of diamond powder and the placing methods of substrate on the deposition effect are discussed.
重点对影响金刚石上砂效果的几个关键因素进行了工艺试验，讨论了阴极电流密度、搅拌方式、微粉浓度及尺寸、基体放置方式对沉积效果的影响。
The techniques of depositing zinc thin film on grass substrate by vacuum evaporation and direct-current sputtering were investigated with XRD, SEM and AFM in this paper.
本论文对真空蒸发法和直流溅射法沉积锌膜的工艺进行了研究，结合XRD、SEM、AFM等分析手段，以探索这两种方法在制备锌膜方面的一般规律。
A switching device disposed in a substrate is turned on and a program current is applied to a fuse electrically connected to the switching device, thereby cutting the fuse.
将衬底中设置的开关器件导通，并且向与开关器件电连接的熔丝施加编程电流从而切断熔丝。
The invention operates a memory cell with charge capturing structure by measuring the current between substrate region and at least one of the source and drain regions of the memory cell.
通过在存储器单元的衬底区域与存储器单元的源极区域及存储 器单元的漏极区域中至少一个之间测量电流，来操作一种具有电荷捕 捉结构的存储器单元。
The results show that lower open circuit potential and current efficiency, higher whiteness, better coating binding force were found when the substrate was nickel;
结果表明： 不同的电镀基材在硫酸铑体系中对其阴极极化的影响不明显； 以镍为基材镀铑时， 具有开路电势低、电流效率低、白度高、结合力好等特点；
The potential-time curves under constant current and cyclic voltammetry curves were measured, and the potential activation process of copper plating on iron substrate in cyanide electrolyte was shown.
进行了恒电流电位-时间曲线和循环伏安曲线的测定，显示了铁电极进行氰化物镀铜时，镀层沉积前铁表面的电位活化过程。
It is described a cathodic protection system of reinforced concrete structures with discrete anodes obtained starting from a corrugated planar substrate welded to a longitudinal current collector.
本发明描述了具有不连续阳极的增强混凝土结构的阴极保护系统，所述阳极可从焊接到纵向集电器的皱褶状平面基体开始获得。
This paper describes the current state and trend of external inspection technology of printed circuit board and mounting substrate.
概述了印制板和安装基板的外观检查技术的现状和动向。
These Q values are limited by the conductor resistance and eddy current loss in the silicon substrate.
这些Q值受到导体电阻和硅衬底的涡流损耗的限制。
The eddy-current coils and the substrate material have better flexibility so as to measure the clearance among curved faces of any form, and can be arranged in the narrow space for measurement.
电涡流线圈及其基底材料具有良好的柔顺性，可以测试任意曲面形状之间的间隙，适合安装在狭小的空间中进行测量。
The eddy-current coils and the substrate material have better flexibility so as to measure the clearance among curved faces of any form, and can be arranged in the narrow space for measurement.
电涡流线圈及其基底材料具有良好的柔顺性，可以测试任意曲面形状之间的间隙，适合安装在狭小的空间中进行测量。
应用推荐