Each input of a pulse motor shaft of a step Angle stepping increment.
每输入一个脉冲电机转轴步进一个步距角增量。
The more paces the step angle of the stepping motor has been subdivided, the more clear the CCD image is captured.
为了获得更加清晰的图像，控制系统采用细分技术细分步进电机的步距角，使得CCD镜头调整能够更加精细。
In order to apply it in MEMS system, a simple but effective method is used to realize the subdivision of a step Angle.
为了实现微马达在精密MEMS系统中的应用，采用了一种简单、实用的方式来实现微马达的步距细分。
Stepper motor tuning program for stepper motor control and testing. Step angle and automatic computer testing point of view.
说明：步进电机微调程序，用于步进电机控制与检测。测试步进角度和自动计算机角度。
Stepping motor is a kind of electromechanical component that is driven in step angle or line displacement by electric pulse signal.
步进电动机是一种将电脉冲信号转换成相应的角位移的机电元件。
Based on the construction pattern and the control principle of stepmotor, fractional step Angle control of stepmotor is achieved by PWM Phase Vector Cornposition.
本文根据步进电视的结构与控制原理，提出一种PWM式相矢量合成分数步距角控制方案。
Present a new method to test the micro step angle of step motor in micro step driving mode. Solve the problem of how to test the micro step angle. This paper provide practical data and curve.
提出了一种新的步进电动机微步驱动方式下步距角的测试方法，较好地解决了微小步距角的测量问题，给出了实验数据和曲线的例子。
Once the call returns for the current time step, you clear the forces applied to the objects from the last step, and then get the current position and Angle of your dynamic body.
一旦此调用针对当前时间步长返回，就可以清空上一步长施加到这些物体上的力，然后获得动态物体的当前方位和角度。
The motor is characterized by reliability, small step-angle, high holding torque, strong ability of driving high rotor inertia load and super structural manufacturability.
其突出的优点是步距角小、驱动惯性负载能力强、自定位力矩大、可靠性高、结构工艺性好。
Step 4 Determine your Angle and approach to the story and plan accordingly.
第四步确定你的角度和写法，相应地计划结构。
Using only elementary geometry, determine angle x. Provide a step-by-step proof.
利用初等几何 求角x. 写出求解过程.
This paper introduces the processing method of clutch tooth, sets forth the principle that step motor achieve Angle auto-dividing by PLC and designs the system of PLC controlling.
介绍了离合器齿牙的加工方法，简述了PLC控制步进电机实现自动分度加工的原理，并设计了PLC控制系统。
Realization to step enter the electric motor turn soon, Angle of control, and completion real object of creation.
实现了对步进电动机转速、角度的控制，并完成了实物的制作。
It is a practical method to realize fine-index of step-angle by means of modulation phase-current on the principle of defined change law.
用调制相电流按给定规律变化的原理实现步距角的细分是一种适用的方法。
The favorable and unfavorable initial power angle range and the maximum load torque of pulling into step with different initial angle is determined.
确定出牵入同步时较好和较差初始功角的范围，和在不同初始功角下能够牵入同步的最大负载值。
Essentially, you want the cube at this step to be at a 45 degree Angle to your model. This will make more sense later on.
实际上，这个长方体和模型要成45度，这一步操作将在后面有重要的意义。
By analyzing the problems in the existing method of obtaining inclination Angle, an new algorithm (step by step optimization) is presented.
还指出了现有求取刀轴倾角方法存在的问题，提出了一种“逐步寻优”求取刀轴倾角的新算法。
Remark: Since our instrumental step is 0.36 degree in the Angle adjustment and trial test, so, the below mentioned degrees are all the multiple of 0.36 degree, most of which is not integer.
说明：由于调试角度时和测试时我们的仪器的步进电机的步幅是0.36度角，所以下面提到的角度都是步幅0.36度的倍数，那么，大多数角度都不是整数。
This paper presents the quantitative research and calculating method of current distribution of step motor onthe condition of even stepping Angle at ela...
本文介绍细分运行时均匀步距角条件下步进电动机电流分配的定量研究和计算方法。
The signal, after the Angle modulation, would change in its spectral structure. And the analysis on its frequency spectrum is an important and necessary step for signal processing.
信号经过角度调制后，频谱结构将发生变化，频谱分析是处理信号的重要步骤和必要的保证。
By the driving of the step motor, the ultrasonic sensor turns in immovable Angle.
超声传感器在步进电机的驱动下，以固定的角度步进转动。
The encoder measures the rotated Angle of the step motor and solves the problem of pulse losing by supplementing pulse, which ensures that the tape moves one fit step every time.
编码器检测步进电机旋转角度，以补发脉冲的方式解决了步进电机的丢步问题，保证载带每次运行恰好一个工位。
Finally, we do a step further to study result, make practicality Suggestions on bank industry from Human Resource Management Angle and discuss limitation and future study.
最后对研究结果作进一步的探讨，并从人力资源管理角度提供我国银行业实务上的建议，而且讨论了局限性以及后续研究方向。
The defects include cracks, color center, inclusions, step-faceting, low-angle boundaries and dislocation pile-up group.
这些缺陷包括：包裹物，色心，开裂，台阶面，位错，小角晶界和位错塞积群。
He chose the reading catalogue from the Angle of compose, from the Angle of conformance and altering temperament, from the Angle of step-by-step, guide juniors to study.
此外他还从写作的角度，从顺应和改变气质角度，从遵循循序渐进原则的角度选择阅读书目，指导子弟读书。
The shaping process of inside right-angle step is so complicated and its model is so complicated too.
楔横轧内直角台阶成形过程非常复杂，导致数学模型也很复杂。
Results: increased articular step-off heights progressively increased valgus Angle, and average and maximum contact pressures, and progressively decreased contact areas in lateral compartment.
结果：随着关节面塌陷高度的增加，膝关节外翻角度、外侧间隙的平均和最大的接触压力逐渐增加，而接触面积则逐渐减少。
In the second step, the prestressed cable is used as reinforced support to the roof plate, and the reinforcement by bolting and grouting with inside grouting bolt is applied to base Angle.
然后再采用预应力锚索对顶板进行加强支护，且对巷道底角采用内注浆锚杆进行锚注加固。
Research results show that fault tolerant indexes, the location of the end-effector, the initial joint Angle, end-effector velocity and integration step have influence on the change o...
结果表明，性能指标、末端起始点位置、关节起始位形角，末端速度以及步长等都会影响到关节速度突变。
By immersing wet_etch method, slope angle of one_dimension step gratings is studied with fused silica and optimized etching liquor HF.
用浸没的湿法刻蚀方法，以熔石英为基板刻蚀材料，用优化配方的HF刻蚀液进行刻蚀，研究了HF刻蚀一维光栅台阶的斜坡陡度。
应用推荐