In the paper the spraying process and parameters are described.
本文阐述了喷涂工艺流程及参数。
This spraying process has been designed to retain the characteristics of the coatings.
这喷涂制程的设计，保留了涂层的特点。
The spraying process and disposal ways of rolling cup station on spraying line were discussed.
讨论了喷涂工艺、喷漆线旋杯站的布置方式。
Result for X-ray diffractometer test indicates that no oxidization occurred during the spraying process.
射线衍射分析结果表明冷喷涂过程中，无氧化现象发生。
Fluocarbon coating spraying process and selection of spray guns are described as well as standard for film testing.
介绍了氟碳喷涂工艺、喷枪选择和涂层测试标准。
A technique of spraying polyurea (SPUA) is a new technique using the special equipments and in situ spraying process.
喷涂聚脲(SPUA)技术是采用专用设备，现场喷涂工艺施工的一种新技术。
Introduce the preparation for metallographic specimen of thermo-spraying process coat and explain some technical questions.
对热喷涂层金相试样制备进行了介绍，并对一些技术问题给予提示。
Choose spraying process parameters are the main principles of the coating and improve the bonding strength of the substrate.
选择喷涂工艺参数的主要原则是提高涂层与基材的结合强度。
This paper described hammer powder coatings, and a spraying process of hammer powder coatings as well as the operation hints.
本文主要介绍了一般垂纹粉末涂料，重点讨论了喷涂过程中可能出现悳问题和解决悳方案。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显著提高工件的抗氧化性能。
Stable spraying process and uniform and compact coating with high adhesive strength can be obtained by using the expert controller.
研制的等离子喷涂专家控制器可实现对常用喷涂粉末的稳定喷涂并获得均匀致密和高结合强度的等离子涂层。
The electrostatic spraying process of the powder coating and its application on the surface of the alumimium profiles are introduced.
本文介绍了静电喷涂的原理，静电喷涂设备和用途，操作工艺、应用效果及注意事项。
Deposition of carbide ceramic coatings by the HVAF spraying process enables wear performance of drawing pulley-rings to improve greatly.
采用高速火焰（HVAF）喷涂工艺制备金属碳化物陶瓷涂层，使拉丝轮圈的耐磨性能大幅度提高。
Through the research on the effect of spraying process on the quality of overlay, the method to improve the spraying quality was proposed.
研究了喷焊工艺对喷焊层质量的影响规律，提出了改善喷焊层质量的方法和措施。
It is also proved to be the ideal power source for arc spraying process according to the experimental analysis of the dynamic behavior in arc.
对逆变方波交流电弧喷涂过程中电弧区的动态行为进行了一定试验分析，得出逆变方波交流电源是理想的电弧喷涂电源。
The cover is made of stainless steel and the surface adopts electrostatic spraying process, which makes feature of surface fluency and cleaning.
外壳均采用不锈钢材料制作，表面静电喷涂处理。外观简洁、流畅。
The study was focused on the layer's composition design, tribological properties, and spraying process parameters for wear and. corrosion resistance.
着重试验研究了耐磨、抗蚀涂层材料的设计配制、性能优选和喷涂工艺参数的选定。
Thermal spraying process. Thermal spraying metal coatings are depositions of metal which has been melted immediately prior to projection onto the substrate.
热喷涂金属涂层是金属熔化后立即投射到基体上形成的金属沉积层。
The thermal spraying process was used to obtain the composite coatings of nickelbased self fluxing alloy reinforced by buckytube on plain carbon steel substrate.
用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。
Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process parameter are realized.
通过建立专家数据库给出喷涂过程参数，实现了喷涂过程的参数初始化和控制。
Spraying process of PPS coating is described. The main factors influencing the quality are analyzed and the solving methods on the basis of practice are proposed.
根据实践经验叙述了PPS的喷涂工艺，总结分析了影响PPS涂层施工质量的主要因素及解决办法。
The effects of paint-spraying process and silicon carbide(SiC)content on mechanical properties of polyphenylene sulfide (PPS) composite coating have been studied.
研究了喷涂工艺和碳化硅含量对聚苯硫醚复合涂层力学性能的影响。
Abstract: the principle and characteristics of fiber spraying process are described. Its economic and technical index contrasts with other process are also discussed.
摘要：综述了纤维喷涂工艺的原理和特点以及对辅助工艺的要求，并与其它工艺进行经济技术指标的实例对比。
The utility model aims to solve the problems such as poor uniformity of product, uneasy control of alloy thickness and easy blockage of nozzle during spraying process.
本实用新型的目的是解决产品的一致性较差、合金厚度不好控制及喷制过程易堵塞喷嘴等方面存在的问题。
A good repairing result was obtained by combining reasonable spraying process and material matching with this parameter in repairing oil cooling set of stainless steel.
用此工艺参数修复船用不锈钢油冷套，加之合理的喷涂工序与材料匹配，达到良好的修复效果。
Within certain extent, the spraying process can only replace the conventional casting process, but also increase economic profit. Therefore it has been widely used in pr...
在一定范围内，本工艺不但能取代传统的浇铸工艺，而且能提高技术经济效益，已广泛用于国内生产实践。
Within certain extent, the spraying process can only replace the conventional casting process, but also increase economic profit. Therefore it has been widely used in pr...
在一定范围内，本工艺不但能取代传统的浇铸工艺，而且能提高技术经济效益，已广泛用于国内生产实践。
应用推荐