Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显著提高工件的抗氧化性能。
Stable spraying process and uniform and compact coating with high adhesive strength can be obtained by using the expert controller.
研制的等离子喷涂专家控制器可实现对常用喷涂粉末的稳定喷涂并获得均匀致密和高结合强度的等离子涂层。
In the paper the spraying process and parameters are described.
本文阐述了喷涂工艺流程及参数。
This spraying process has been designed to retain the characteristics of the coatings.
这喷涂制程的设计，保留了涂层的特点。
Result for X-ray diffractometer test indicates that no oxidization occurred during the spraying process.
射线衍射分析结果表明冷喷涂过程中，无氧化现象发生。
Fluocarbon coating spraying process and selection of spray guns are described as well as standard for film testing.
介绍了氟碳喷涂工艺、喷枪选择和涂层测试标准。
A technique of spraying polyurea (SPUA) is a new technique using the special equipments and in situ spraying process.
喷涂聚脲(SPUA)技术是采用专用设备，现场喷涂工艺施工的一种新技术。
Introduce the preparation for metallographic specimen of thermo-spraying process coat and explain some technical questions.
对热喷涂层金相试样制备进行了介绍，并对一些技术问题给予提示。
Deposition of carbide ceramic coatings by the HVAF spraying process enables wear performance of drawing pulley-rings to improve greatly.
采用高速火焰（HVAF）喷涂工艺制备金属碳化物陶瓷涂层，使拉丝轮圈的耐磨性能大幅度提高。
Through the research on the effect of spraying process on the quality of overlay, the method to improve the spraying quality was proposed.
研究了喷焊工艺对喷焊层质量的影响规律，提出了改善喷焊层质量的方法和措施。
It is also proved to be the ideal power source for arc spraying process according to the experimental analysis of the dynamic behavior in arc.
对逆变方波交流电弧喷涂过程中电弧区的动态行为进行了一定试验分析，得出逆变方波交流电源是理想的电弧喷涂电源。
Thermal spraying process. Thermal spraying metal coatings are depositions of metal which has been melted immediately prior to projection onto the substrate.
热喷涂金属涂层是金属熔化后立即投射到基体上形成的金属沉积层。
The effects of paint-spraying process and silicon carbide(SiC)content on mechanical properties of polyphenylene sulfide (PPS) composite coating have been studied.
研究了喷涂工艺和碳化硅含量对聚苯硫醚复合涂层力学性能的影响。
The utility model aims to solve the problems such as poor uniformity of product, uneasy control of alloy thickness and easy blockage of nozzle during spraying process.
本实用新型的目的是解决产品的一致性较差、合金厚度不好控制及喷制过程易堵塞喷嘴等方面存在的问题。
A good repairing result was obtained by combining reasonable spraying process and material matching with this parameter in repairing oil cooling set of stainless steel.
用此工艺参数修复船用不锈钢油冷套，加之合理的喷涂工序与材料匹配，达到良好的修复效果。
Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.
通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。
Experiments proved that the calculation results are believable. The influence of deposition rate, coefficient of heat transfer and spraying process on coating temperature field was discussed.
以实验验证计算结果，并详细讨论了喷涂沉积速率、界面传热系数以及间歇喷涂对涂层温度场的影响。
The system can monitor four major indexes in the spraying process, the spraying pressure, spraying flow, sprayer travel speed rate and the percentage of the remaining mix pesticide in the tank.
该系统可实时监测喷施农药过程中的喷雾压力、喷雾流量、喷雾机行走速度和药桶药液余量4个主要参数。
The quality of coating and surface treatment methods and spraying process has a great relationship, therefore, choose a suitable surface treatment methods and spraying process is very important.
喷涂层质量好坏与工件表面处理方式及喷涂工艺有很大关系，因此，选择合适的表面处理方式和喷涂工艺是十分重要的。
Spraying process of PPS coating is described. The main factors influencing the quality are analyzed and the solving methods on the basis of practice are proposed.
根据实践经验叙述了PPS的喷涂工艺，总结分析了影响PPS涂层施工质量的主要因素及解决办法。
Spraying process of PPS coating is described. The main factors influencing the quality are analyzed and the solving methods on the basis of practice are proposed.
根据实践经验叙述了PPS的喷涂工艺，总结分析了影响PPS涂层施工质量的主要因素及解决办法。
应用推荐