Using the test signal method, a detailed analysis of subsynchronous oscillation for a HVDC system is performed.
对一个仅含有直流输电线路的系统，采用复转矩系数——测试信号法，对其次同步振荡特性进行了分析。
The short-wave detection signal method can guarantee reliable and accurate information transmission, achieving high reliable information-receiving.
采用短波探测信号方法，可以保证信息传输可靠准确地传输，实现高可靠的信息接收。
The measuring vibrating signal method may be used on real time, mean while, vibrating signal can be measured by peak to peak value or true virtual value .
对风机的振动量监测可以采用振动信号波形的实时监测，也可采用对峰峰值或有效值的实时监测。
In the view, you need to define signal handlers using the define_signal method. It takes a hash defining a signal name and a view method to handle that signal.
在视图中，您需要使用define_signal方法定义信号处理程序。
Finally, the paper simulated to the rotor initial point estimate method using DSP related tool and confirmed the accuracy of high frequency voltage signal method.
最后，利用DSP相关软件，对转子初始位置估算方法进行模拟仿真，验证了高频电压信号注入法理论的正确性。
Based on CC1000 wireless sensor networks development platform, the odometer location error is corrected by measuring RSSI parameter and using maximum signal method.
在CC 1000无线传感器开发平台上，对节点RSSI参数进行测量并采用最大信号法定点修正定位误差。
We called this edge effect, which is discussed and modified with separate reflect signal method in this paper. The effect of this method on the testing result is also given.
该文就这种边缘效应进行讨论和实验，提出用分离反射信号的方法进行修正，同时对该修正方法对测试结果的影响进行了讨论。
On the basis of this, injecting frequency conversion signal method on measuring capacitive current is selected to use here. It is reliable and its error is small, timeliness is good.
在此基础上，选择了对地电容电流测量的注入变频信号法，该测量方法具有测量误差小、实时性良好、安全可靠的特点。
By using test signal method, the sub-synchronous electrical damping characteristics of a generator and the impacts of the designed SEDC on the generators electrical damping are analyzed.
采用测试信号法，通过计算发电机组的次同步电气阻尼特性，分析所设计的SEDC对发电机组次同步振荡的抑制效果。
A new test signal method based approach to design power oscillation damping (POD) controller for TCSC is proposed, by which the bulky eigenvalue calculation of state matrix can be avoided.
提出了一种基于测试信号法的TCSC功率振荡阻尼(POD)控制器的设计方法，避免了计算量庞大的状态矩阵特征值计算。
The signal of one object simply needs to be connected to the method of another.
只需要将一个对象的信号连接到另一个对象的方法。
The method is signaled when the object is set to signal or the time out interval is finished.
当对象被设置发出信号或者超时时间段结束时，这个方法会得到通知。
The method should provide food for thought for Bjarnsholt, who has yet to find any serious candidate compounds for signal-blocking in P. aeruginosa infections in people with cystic fibrosis.
这种方法有可能为巴恩索特提供研究材料，他已经找出一系列阻断绿脓杆菌信号的候选化合物。
Instead, the server can signal to the resource adapter by calling the release method on the Work object.
相反，服务器可以通过调用Work对象的release方法，给资源适配器发信号。
But how would we connect this same signal to the method of a particular object? Easy — simply use the following template.
但是我们该如何将这同一个信号连接到某个特定对象的方法呢？
If you don't want the original method to be called, you can disconnect the signal from the slot, for instance by adding the following line before the logger.show line.
如果您不想调用原始方法，那么可以从插槽disconnect信号，例如通过在logger . show行之前添加以下行。
"It will signal a dramatic shift to a cleaner, more sustainable method of providing frequency regulation on the grid," Beacon CEO Bill Capp told the GridWeek conference in Washington last week.
“这是一个巨大的改变，我们可以用更环保、更持续的方法来让电网实现频率的调整。”灯塔公司首席执行官比尔·凯普上周在华盛顿出席电网周（GridWeek）大会时说道。
Each of these signal handlers is quite short. Here's the do_roll_up method.
每种信号的处理程序都很短。
Using the input and output signal, the method can model the system, and can control the dynamical property of the system with the inverse transfer function of the controlled object as the controller.
本方法以实际系统的输入输出信号为依据，实现系统建模，用被控对象传递函数的逆作为串联控制器来对系统的动态特性进行控制。
The principle and signal processing technique of the method are discussed comprehensively and systematically.
全面系统地讨论了该方法的原理和信号处理方法。
In this paper, the method of signal flow graphs is applied to path enumeration and deflection routing performance analysis in multihop networks.
本文将信号流图的方法应用于多级跳跃网中的路径枚举和折射路由性能分析。
Simulation results prove that, if the error is compensated by using the new method, signal DOAs can be accurately estimated using MUSIC algorithm.
计算机模拟结果表明，采用该方法完成误差校正后，用MUSIC算法能实现对信号DOA较为准确的估计。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
The proposed method dealt with measurable signal of the aircraft, mathematical model and no relevant transcendental knowledge was needed.
粗集方法可直接处理歼击机的可测输出信号，不需要对象的数学模型和相关先验知识。
The operating principle of the fluxgate sensor with three tips is analyzed, and a effective signal processing method is obtained in this paper.
文中分析了三端式磁通门传感器的工作原理，给出了有效的信号处理方法。
All the PA signal input (RCA) release, then click the check method of check whether there is noise, noise.
把所有的功放讯号输入(即rca)解除，然后按噪音的检查方法检查，试听是否有噪音。
Focusing on neural weak signal detection, this thesis presents the principle and practicable method to utilize SR for neural weak signal detection.
本文以神经弱信号检测为研究对象，提出了利用随机共振原理进行神经弱信号检测的基本思想及实现方法。
This article introduces the work principle of untouched electrode method exploration, wave of transmit signal needed in exploration and circuit that generate transmit signal.
本文介绍了不接触电极法测量的工作原理，测量中所需的发射信号的波形以及产生发射信号的电路。
This paper has discussed the way of probing Doppler shift signal based on crossed phase detecting method in detail and introduced each function circuits briefly.
本文详细的论述了依据正交相位检测法提取多普勒频移信号的方法，并对各部分实现电路作一简要的介绍。
This paper has discussed the way of probing Doppler shift signal based on crossed phase detecting method in detail and introduced each function circuits briefly.
本文详细的论述了依据正交相位检测法提取多普勒频移信号的方法，并对各部分实现电路作一简要的介绍。
应用推荐