• The primary application for the diode laser bar is as a pump light source for use in solid-state lasers for medical and industrial applications.

    半导体激光器主要用做医用和工业用固体激光器的光源泵。

    youdao

  • Increasing the thickness of films will enhance the peak of PL, and there is a saturated thickness at the constant pump power by Laser.

    而薄膜厚度的增加有利于退火后光致发光的峰值光强增加,但是对于一定的泵浦功率存在饱和厚度。

    youdao

  • A single_mode laser cubic model driven with quadratic pump noise is proposed.

    合理地引入了平方泵噪声到单模激光的立方模型中。

    youdao

  • By laser cladding, the sealing face of the in outlet valve parts in methylamine pump in urea production line has been strengthened.

    采用激光熔覆技术对尿素生产线上的甲胺泵进排液阀零件密封面进行强化。

    youdao

  • Experimental results show that the reflectivity change increases with the power of the pump laser.

    实验结果表明反射率的变化随着泵浦激光功率的增强而增大。

    youdao

  • High power semiconductor lasers are widely used in communication, surgery, printing, laser manufacture and optical pump.

    大功率半导体激光器在光通讯、医疗、印刷、激光制造和光泵浦等领域中有着广泛的应用前景。

    youdao

  • The damaged parts of the acid pump were repaired using laser cladding technology and domestic alloy materials. The acid pump runs well after repair.

    后采用激光熔覆技术和国产合金材料对酸泵受损部件进行了修复,修复后酸泵运行良好。

    youdao

  • While optical fiber Raman laser (RFL) can be a good pump of FRA. The coupling coefficient between FRL and the transmission fiber is very small, so the pump and the amplifier can be compatible easily.

    而光纤拉曼激光器(RFL)又作为FRA的泵浦源,它与光纤的耦合损耗小,可以实现泵浦与放大的良好兼容。

    youdao

  • By use of rate equations, we have analyzed the effect ot laser wavelength radiation in pump light source on excited state population accumulation of laser medium and laser threshold.

    本文用速率方程分析了泵浦光源中激光波长辐射对激光介质激发态粒子数积累和激光器阀值的影响情况。

    youdao

  • A fiber laser cavity that includes a laser gain medium for receiving an optical input projection from a laser pump.

    一种光纤激光腔,其包括激光增益介质,用于接收来自激光泵的光输入投射。

    youdao

  • The influences of thermal effects and the matching of the laser mode radius with the pump spot radius on the output power and beam quality are discussed.

    讨论了激光晶体的热效应以及激光模半径与泵浦光斑半径匹配对激光输出功率和输出光束质量的影响。

    youdao

  • Mainly used to pump impeller, pipe line and complex graphics and all kinds of metal materials, the welding corresponding control system can automatically accomplish 3d laser welding.

    主要用于水泵叶轮、管道相贯线及复杂图形和各种金属材料的焊接,配合相应控制系统能自动完成三维激光焊接。

    youdao

  • The hollow lens duct is introduced for the application in the coupling of pump radiation from extended two dimensional semiconductor laser diode arrays into solid state laser gain media.

    为了实现对介质的高效抽运,将空心透镜导管应用于大口径高功率激光二极管阵列耦合系统。

    youdao

  • An accurate method for measuring the focal lengths of the pulse pump-induced lenses in laser media is presented and discussed.

    提出脉冲激光工作物质热焦距的精确测量方法,并对其进行了讨论。

    youdao

  • The optimization of threshold pump power of the double-clad cw fiber laser has been discussed.

    对连续运行时双包层光纤激光器阈值的优化问题进行了分析。

    youdao

  • This solution can quickly calculate the laser and pump power distribution along the fiber and the output power. The result of the percentage error is about 1% and up to 0.2%.

    这种解法能够迅速计算出激光及抽运光沿光纤的功率分布状况以及输出功率,计算误差百分比约为1%,最高达到0.2%;

    youdao

  • The results show that the threshold distance of SRRS decreases with increasing the intensity and the pulse width of the pump laser.

    研究结果表明:SRRS效应的阈值距离随着泵浦光强度和脉宽的增大而变短;

    youdao

  • An optimum laser diode (LD) array coolant temperature is chosen in an attempt to realize the weak but uniform pump absorption.

    实验中我们选定了最佳的泵浦源冷却温度以实现较弱但更加均匀的泵浦吸收分布。

    youdao

  • In nonlinear optical frequency conversion process, it is desirable to maximize the product of the intensity of pump laser and the interaction length in order to achieve maximum conversion efficiency.

    在光的非线性传播过程中,增加泵浦光的强度及光和物质的互作用长度是获得较高的频率转换效率的主要途径。

    youdao

  • The design method and conclusion presented in this paper may contribute to the depolarization design for the pump laser of Raman amplifiers.

    文中的设计方法和结论对拉曼放大器的泵浦光源退偏设计具有一定参考作用。

    youdao

  • The gain character and power density distribution in the active fiber of double clad fiber laser (DCFL) with different pump modes are investigated by means of numerical analysis.

    本文通过数值分析研究了L D抽运方式对双包层光纤激光器增益特性及光纤内光功率分布的影响。

    youdao

  • For short fiber, the output laser power and slope efficiency can be improved when a reflective mirror is set at output end to reflect the pump light.

    当光纤长度较短时,在输出端放置反射镜使泵浦光高反射,可以提高输出功率和效率。

    youdao

  • The optical bistable is observed because the absorption for laser reduces with the increasing of the pump power.

    饱和吸收体对激光的吸收系数随抽运光强的增加而减小,形成了输出激光的光学双稳态特性。

    youdao

  • An exact analytical expression for laser intensity distribution is obtained on resonance with equal mode pump parameters.

    在共振及两模具有相同泵参数时,获得了光强联合定态分布的精确解析表达式。

    youdao

  • It is inevitable that a gain medium exists always in a practical laser resonator. Moreover, it is impossible to ensure the pump light intensity distribution in the laser medium is uniform.

    实际的激光腔不可避免有增益介质的存在,同时,也不可能保证光强的泵浦分布是均匀的。

    youdao

  • A mathematic model of the pump power absorption and distribution in the LD side pumped solid state laser medium is set up.

    通过对激光二极管(LD)侧面抽运激光介质的分析研究,建立了二极管侧面抽运激光介质所吸收的抽运光功率分布的数学模型。

    youdao

  • The experiments show that with large pulse width and high repetition rate of pump pulse, the dependent jitter scope of output laser pulse with pump pulse is increased.

    结果表明在抽运时抽运脉宽和重复率较大的情况下,输出激光脉冲相对于抽运脉冲抖动范围明显加大。

    youdao

  • The pump power distribution in the single diode directly pumped laser rod with different pumped parameters is simulated using the method of ray trace.

    采用光线追迹法模拟计算出单个二极管在不同抽运参数下直接抽运激光棒时,激光棒所吸收的抽运光功率的分布。

    youdao

  • For some pump pulses, the quenching effect of the quenched laser was analysed by laser rate equations. In addition some important parameters of the lasers were discussed.

    对于一些具体的泵浦情况,通过激光速率方程理论上探讨了激光器的猝灭效果,并且对激光器的一些重要参数进行了一些研究。

    youdao

  • For some pump pulses, the quenching effect of the quenched laser was analysed by laser rate equations. In addition some important parameters of the lasers were discussed.

    对于一些具体的泵浦情况,通过激光速率方程理论上探讨了激光器的猝灭效果,并且对激光器的一些重要参数进行了一些研究。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定