• The primary application for the diode laser bar is as a pump light source for use in solid-state lasers for medical and industrial applications.

    半导体激光器主要用做医用和工业用固体激光器的光源泵。

    youdao

  • Increasing the thickness of films will enhance the peak of PL, and there is a saturated thickness at the constant pump power by Laser.

    而薄膜厚度的增加有利于退火后光致发光的峰值光强增加,但是对于一定的泵浦功率存在饱和厚度。

    youdao

  • Experimental results show that the reflectivity change increases with the power of the pump laser.

    实验结果表明反射率的变化随着泵浦激光功率的增强而增大。

    youdao

  • A single_mode laser cubic model driven with quadratic pump noise is proposed.

    合理地引入了平方泵噪声到单模激光的立方模型中。

    youdao

  • By laser cladding, the sealing face of the in outlet valve parts in methylamine pump in urea production line has been strengthened.

    采用激光熔覆技术对尿素生产线上的甲胺泵进排液阀零件密封面进行强化。

    youdao

  • As their applications we have studied the effect of air index gradient on laser alignment and the additional diffraction loss of laser caused by inhomogeneous pump.

    应用于空气折射率梯度对激光准直的影响和不均匀泵浦引起的激光器附加衍射损耗。

    youdao

  • With high photoelectric rate. The diode side-pump laser source is good stability and long life time.

    电光转换效率更高,功耗低,输出激光能量稳定。半导体侧面泵浦激光器使用寿命更长。

    youdao

  • By use of rate equations, we have analyzed the effect ot laser wavelength radiation in pump light source on excited state population accumulation of laser medium and laser threshold.

    本文用速率方程分析了泵浦光源中激光波长辐射对激光介质激发态粒子数积累和激光器阀值的影响情况。

    youdao

  • The influences of thermal effects and the matching of the laser mode radius with the pump spot radius on the output power and beam quality are discussed.

    讨论了激光晶体的热效应以及激光模半径与泵浦光斑半径匹配对激光输出功率和输出光束质量的影响。

    youdao

  • The pump depletion is a severe problem which hinders the laser-plasma beat-wave accelerator concept from being practical.

    泵浦倒空是限制激光等离子体拍频加速器概念成为现实的严重问题。

    youdao

  • High power semiconductor lasers are widely used in communication, surgery, printing, laser manufacture and optical pump.

    大功率半导体激光器在光通讯、医疗、印刷、激光制造和光泵浦等领域中有着广泛的应用前景。

    youdao

  • The hollow lens duct is introduced for the application in the coupling of pump radiation from extended two dimensional semiconductor laser diode arrays into solid state laser gain media.

    为了实现对介质的高效抽运,将空心透镜导管应用于大口径高功率激光二极管阵列耦合系统。

    youdao

  • The optimization of threshold pump power of the double-clad cw fiber laser has been discussed.

    对连续运行时双包层光纤激光器阈值的优化问题进行了分析。

    youdao

  • In nonlinear optical frequency conversion process, it is desirable to maximize the product of the intensity of pump laser and the interaction length in order to achieve maximum conversion efficiency.

    在光的非线性传播过程中,增加泵浦光的强度及光和物质的互作用长度是获得较高的频率转换效率的主要途径。

    youdao

  • The damaged parts of the acid pump were repaired using laser cladding technology and domestic alloy materials. The acid pump runs well after repair.

    后采用激光熔覆技术和国产合金材料对酸泵受损部件进行了修复,修复后酸泵运行良好。

    youdao

  • The gain character and power density distribution in the active fiber of double clad fiber laser (DCFL) with different pump modes are investigated by means of numerical analysis.

    本文通过数值分析研究了L D抽运方式对双包层光纤激光器增益特性及光纤内光功率分布的影响。

    youdao

  • An accurate method for measuring the focal lengths of the pulse pump-induced lenses in laser media is presented and discussed.

    提出脉冲激光工作物质热焦距的精确测量方法,并对其进行了讨论。

    youdao

  • It is reviewed in this paper the development of the crystals of laser diode pump, in which more than 10 kinds of laser crystals are analyzed in detail.

    文章概述了适于激光二极管泵浦激光晶体的研究进展,讨论了十几种适于激光二极管泵浦激光晶体的特性。

    youdao

  • The pump power distribution in the single diode directly pumped laser rod with different pumped parameters is simulated using the method of ray trace.

    采用光线追迹法模拟计算出单个二极管在不同抽运参数下直接抽运激光棒时,激光棒所吸收的抽运光功率的分布。

    youdao

  • Increasing the repetition rate, the output laser has the same repetition rate as the pump laser, but more sub-pulses will be output in one pump pulse.

    当增加重复频率时,输出与泵浦激光重复频率完全一致的激光脉冲,但也将在一个泵浦脉宽中出现多个激光脉冲输出。

    youdao

  • For short fiber, the output laser power and slope efficiency can be improved when a reflective mirror is set at output end to reflect the pump light.

    当光纤长度较短时,在输出端放置反射镜使泵浦光高反射,可以提高输出功率和效率。

    youdao

  • For some pump pulses, the quenching effect of the quenched laser was analysed by laser rate equations. In addition some important parameters of the lasers were discussed.

    对于一些具体的泵浦情况,通过激光速率方程理论上探讨了激光器的猝灭效果,并且对激光器的一些重要参数进行了一些研究。

    youdao

  • The multiple pump sources are used to increase the output power of single fiber laser, and the two dimensions arrange of fiber laser array increases the number of combining fibers.

    利用多泵浦源提高单根光纤激光器的输出功率,利用二维光纤激光阵列排列增加参与组束的光纤数目。

    youdao

  • The threshold condition of low gain broadband-pulsed excimer laser is closely relative to the pump pulse.

    低增益、宽带脉冲准分子激光的阈值条件和其激光泵浦脉冲有密切关系。

    youdao

  • A fiber laser cavity that includes a laser gain medium for receiving an optical input projection from a laser pump.

    一种光纤激光腔,其包括激光增益介质,用于接收来自激光泵的光输入投射。

    youdao

  • The study for temperature fields and pump-face thermal distortions will offer a theoretical direction for solving thermal lens effect of laser crystal to improve laser performance.

    对激光晶体产生的温度场和端面热形变场的研究为解决晶体热透镜效应、提高激光器的性能起指导作用。

    youdao

  • The results of experiment indicate: the laser amplifier with side-directly-pumped coupling system has uniform pump light distribution and gain distribution.

    实验结果表明:采用侧面直接抽运耦合系统的激光放大器有均匀的抽运光分布场和增益分布场。

    youdao

  • This chapter introduced the theory of laser mode, the rate equation theory, the spatial distribution of the pump laser and the oscillating laser and the single frequency detection device.

    本章分别介绍了激光器的模式理论、速率方程的理论、泵浦光和振荡光的空间分布以及对单频检测装置。

    youdao

  • This chapter introduced the theory of laser mode, the rate equation theory, the spatial distribution of the pump laser and the oscillating laser and the single frequency detection device.

    本章分别介绍了激光器的模式理论、速率方程的理论、泵浦光和振荡光的空间分布以及对单频检测装置。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定