Each subsystem is designed using adaptive control with neural network compensation. The stability of the system is guaranteed by the proposed parameter and weight turning law.
各控制子系统的设计采用自适应控制和神经网络相结合的方法，所提出的参数和权重的自适应调整律保证系统的稳定性。
Robust parameter design, proposed by Taguchi Doctor, is the cote theory foundation of quality engineering.
田口博士创立的稳健参数设计是质量工程学的理论核心。
The simulation and experimental results show that the proposed method can locate the optimal or near optimal parameter space, achieve a better solution space than the GA method.
仿真和实验结果表明，该方法能搜寻到最优或次最优的参数空间，并能取得比GA更好的空间解。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
A modified boundary element method is proposed. In the approach, the matrices in the formed boundary equation implicitly contain no eigen parameter.
本文提出一种改进边界元法，它使形成的边界元方程不隐含本征量，避免大阶数矩阵的转置。
To further improve control performance, zone trajectory method was proposed and a parameter was provided to trade off the response performance and model accuracy.
为进一步改善控制品质，提出了区间轨迹方法，通过调整轨迹参数可以在响应速度与模型准确性之间进行选择与平衡。
A reasonable spurious parameter of artificial boundary is also proposed, which lays down the base for FEM numerical simulation.
提出了合理的人工边界反射系数公式，为有限元模型提供了理论基础。
RS encoder with a varied parameter of code and rectified ability is proposed in this paper.
文中提出一种可变参数，纠错能力可调的连续输入的RS编码器。
In this paper, a kind of generalized multiscale fractal parameter is proposed and constructed for the description of image textures, which is based on fractional Brownian random field model.
本文从分数布朗随机场模型的描述出发，提出并构造了一种广义多尺度分形参数，用于描述图像的纹理信息。
In consideration of cost and whole life loss expectation of product, the whole life optimization design model with control parameter of dynamic reliability is proposed.
在同时考虑产品成本价值和全寿命期失效损失期望前提下，提出了以动态可靠度为控制参数的全寿命优化设计模型。
In this paper, a stereo matching method for image uncalibrated camera parameter is proposed, which is based on geometric affine invariant and photometric invariant.
本文提出了一种基于几何仿射不变量和亮度不变量的缺失摄像机标定参数图像的立体匹配方法。
The definition of parameter estimability is proposed for parameter estimation problem with finite measurement information based on the definition of system estimability.
基于系统可估计性定义，本文根据有限测量信息的参数估计问题特点，提出了系统的参数可估计性定义；
The singular index of cutting force signal is proposed as a parameter for detecting cutter's wear.
提出采用切削力信号的奇异性指数作为衡量刀具磨损的参量。
Calculation formulas are proposed with matrices calculation to deal with unsymmetrical faults and parameter matrices for various faults are listed.
使用矩阵运算代替对称分量法的传统序网故障变换，以实现不对称短路故障计算，并给出常见故障对应的参数矩阵。
A linear approach for camera parameter calibration is proposed.
提出了一种线性求解摄像机内外参数的方法。
Furthermore, an robust algorithm which is based on generalized multiscale fractal parameter is proposed for the small target extraction on ocean with good noise immunity.
进一步，基于广义多尺度分形参数，本文提出了一种具有抗噪性能的稳健的目标提取算法，并用于海上小目标的提取。
Based on the analysis of the coupling of rain intensity and convergence time of drainage, proposed values of parameter is given.
对设计径流量计算中降雨强度和汇流时间的耦合问题进行了分析，并提出了相关参数的建议。
An interfacing model with parameter timing is proposed.
提出了基于状态机的参数化接口模型。
An effective space-time receiver scheme that combines smart antennas with multiuser detection is proposed and its parameter is optimized.
提出了一种行之有效的将智能天线技术同多用户检测技术结合的空-时接收方法，并对其参数进行了优化。
The forecast method of fault parameter is proposed to determine the strike, dip, location and scale of fault behind the working face with the distinctive joints in effective zone of fault.
主要介绍所研制的利用断层影响带内的一种特殊节理预报隧道掌子面前方隐伏断层的产状、位置和规模的专利技术——断层参数预测法。
Results show that the proposed PSF parameter estimation technique and the defocused image restoration are effective.
实验结果表明：该方法能有效地估计离焦模糊参数和复原模糊图像。
The feasible algorithm of image emotional classification and reasonable parameter select method were proposed after qualitative analysis and calculation.
通过定性分析和计算对比，确定了图像情感分类的可行算法和合理参数选取方法。
Based on modulation domain analysis, a frequency modulation parameter testing method is proposed.
基于调制域分析，设计了电子产品频率调制参数测试方法。
Three types of four-parameter strength criterion based on new mechanical model are proposed.
在新的力学模型上建立了三种类型的四参数强度准则。
The design scheme of interface circuit between radar simulator and radar is proposed through analyzing and studying the performance parameter of signals.
通过对这些信号性能参数的分析和研究，提出模拟器与雷达系统接口电路设计方案。
The conditional density and the conditional mean are estimated by nonparametric method. Then the estimator of the parameter is proposed by the generalized method of moments.
使用非参数估计方法给出条件密度和条件均值的估计，在此基础上给出参数的广义矩估计。
In this paper, a new automatic tuning method of PID controller based on dynamic neural network is proposed and an online parameter tuning algorithm is given out.
提出一种基于动态神经网络的PID控制器，给出pid参数在线自整定学习控制算法，并进行了算法仿真研究。
To effectively reduce the injection-machine mould-board weight, sequential optimization design method starting from high level topology optimization to low level parameter optimization was proposed.
为了有效地降低注塑机模板的重量，提出了从高层次拓扑优化到底层次参数化优化的顺序优化设计方法。
A long line equation based on line parameter estimation algorithm is proposed in this paper.
提出一种基于长线方程的输电线路参数在线求解算法。
A long line equation based on line parameter estimation algorithm is proposed in this paper.
提出一种基于长线方程的输电线路参数在线求解算法。
应用推荐