First of all, plasma physics, PECVD equipment and its process principles are explained.
首先，对电浆物理、PECVD设备及制程原理加以阐述。
Series of microcrystalline silicon thin films were fabricated by VHF-PECVD at different substrate temperatures (Ts).
采用VHF-PECVD技术制备了不同衬底温度的微晶硅薄膜样品。
SiN thin films are deposited by plasma enhanced chemical vapor deposition (PECVD) under various power and pressure conditions.
利用等离子体增强化学气相沉积（PECVD）工艺，在不同射频功率，不同反应气压条件下制备了氮化硅薄膜。
The electrical and structural properties of microcrystalline silicon thin film and solar cells fabricated by VHF-PECVD were studied.
本文对VHFPECVD制备的本征微晶硅薄膜和电池进行了电学特性和结构特性方面的测试分析研究。
Plasma enhanced chemical vapor deposition (PECVD) technique is the primary method which is used to prepare hydrogenated silicon film.
等离子体化学气相沉积技术制备氢化硅薄膜工艺条件成熟稳定而成为薄膜制备的首选方法。
Silicon nitride thin films were prepared onto steel substrates by radio-frequency plasma enhanced chemical vapor deposition (RF-PECVD) technique.
采用射频等离子体增强化学气相沉积法(RF - PECVD)在钢衬底上沉积氮化硅薄膜。
Without doping, plasma enhanced chemical vapor deposition (PECVD) of silica films on si substrates with gas mixtures of SiH_4 and N_2O is considered.
以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。
Plasma enhanced chemical vapor deposition (PECVD) is one of the matured and simple manipulated among the thin film deposition methods at low temperature.
等离子增强化学气相沉积(PECVD)是低温沉积硅膜的主要方法。
Lots of experiments indicate that the form, structure and properties of silicon nitride thin film prepared by PECVD are related to deposition parameters.
大量的实验研究表明，PECVD氮化硅薄膜的组成、结构及其性能与沉积参数密切相关。
Based on a theoretical model for LPCVD, computer simulation of PECVD polysilicon films has been performed by employing the concept of "electron temperature".
在LPCVD理论模型基础上，通过引进“电子温度”，对PECVD多晶硅膜进行了计算机模拟分析。
Microcrystalline silicon thin films prepared at different deposition parameters using very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD).
采用甚高频等离子体增强化学气相沉积技术制备了不同衬底温度的微晶硅薄膜。
The research in this paper is mainly about the structural designing of the tunable thin film filter and the processing of amorphous silicon membrane depositing by PECVD.
本论文针对热光可调谐光学薄膜滤波器的结构设计和非晶硅薄膜的PECVD制备工艺展开研究。
The optical part can be done by applying Electron Beam Lithography (EBL), Inductively Coupled Plasma (ICP) etching, and Plasma-enhanced Chemical Vapor Deposition (PECVD).
利用电子束光刻、等离子体增强化学气相沉积、感应耦合等离子体刻蚀来实现跑道型微环谐振器的制备；
To meet the requirement for the diamond-like carbon thin films with low friction factor, the tungsten-doped diamond-like carbon(W-DLC)thin films prepared through PECVD were studied in depth.
为了满足制备较厚低摩擦系数类金刚石薄膜（DLC）耐磨镀层的实际需求，对在等离子增强化学气相沉积的类金刚石薄膜（W-DLC）中掺钨进行了系统研究。
In order to deposit high quality and uniform thin films, it is necessary that we study the plasma characteristics in PECVD system, especially the spatial distribution of electron characteristics.
为了制备出高质量的、均匀的薄膜材料，这就要求我们对该系统中的等离子体特性，特别是对电子特性的空间分布规律进行深入的研究。
For the high technical maturity and the high deposition quality, traditional plasma enhanced chemical vapour deposition (PECVD) technology was wide applied in the large-scale industrial production.
传统等离子体增强化学气相沉积(PECVD)技术，工艺成熟，制备的薄膜质量高，较适合大规模工业化生产。
For the high technical maturity and the high deposition quality, traditional plasma enhanced chemical vapour deposition (PECVD) technology was wide applied in the large-scale industrial production.
传统等离子体增强化学气相沉积(PECVD)技术，工艺成熟，制备的薄膜质量高，较适合大规模工业化生产。
应用推荐