With typical examples taken it summarized techniques of recovery and biodegradation waste from polymerization in nylon-6.
举出典型实例，综述了锦纶6聚合废弃物回收利用的方法和生物降解技术。
The recent advances regarding nylon-6 resin in polymerization technology, as well as processing methods and equipments were briefly reviewed.
介绍了尼龙6树脂的聚合新工艺、成型加工方法和设备特性。
Yellow-chip have an biggish effect on Nylon-6 chip quality, analyze the causes of producing yellow-chip and methods of solving this question.
黄粒子严重影响了尼龙-6切片质量，分析了黄粒子产生的原因及解决措施。
In this paper, the development and production of nylon-6 plastics, the developing trends of their new techniques and new kinds were described.
论述了尼龙6塑料的研制、生产情况、新技术、新品种的开发动向。
In this paper the preparation and process condition of nylon-6 resin, the development trends of new technique and new kinds of products were described.
本文论述了尼龙6树脂的研制、生产情况、新技术、新品种的开发动向。
A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to removal carbon and nitrogen from the nylon-6 production wastewater.
用包含水解酸化、硝化和反硝化三个反应器的组合式生物脱氮除碳系统处理尼龙6废水，着重分析了该系统的回流比，溶解氧。
The recovery process of monomer smoke at strand spinneret from nylon 6 production was analyzed.
分析比较了尼龙6生产中注带处单体烟的几种回收方法。
The results show that the nanoparticles of montmorillonite dispersed in nylon 6 matrix play the role of nucleating agent.
结果表明分散在尼龙6基体中的蒙脱土纳米粒子起成核剂的作用。
A triple effect evaporation intermittent distillation process is used to recover caprolactam in the extraction wastewater from nylon 6 production.
采用三效蒸发-间歇蒸馏技术，从锦纶6生产装置的萃取废水中回收己内酰胺。
A new technique for the durable flame retarding treatment of hydroxymethyl nylon 6 textiles with reactive flame retardants is put forward.
提出以羟甲基改性尼龙- 6织物与反应型有机磷系、溴系阻燃剂进行耐久性阻燃整理的新方法。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
介绍了国内尼龙6的双螺杆反应挤出工艺。
The increased distance is in inverse proportion to the content of montmorillonite in nylon 6 matrix.
撑开的距离和蒙脱土在尼龙6基体中的含量成反比。
Reactive compound amine modifiers were introduced during the polymerization of caprolactam and the nylon 6 with amine modifiers modified was obtained.
在己内酰胺水解聚合时加入一定量的可反应型复合胺类改性剂，合成出含有胺类改性剂的尼龙6树脂。
As shown by experimental results, the capacity of modified sericite with higher diameter thickness ratio in strengthening nylon 6 is improved significantly.
实验结果表明，高径厚比改性绢云母增强尼龙6的力学性能有显著的提高。
The glass fiber reinforced nylon 6 was modificated by the filling of the hollow microsphere.
利用空心微珠球型的特性，填充改性玻纤增强尼龙6。
Using 30% glass fiber reinforced nylon 6 as a sample, the influences of the length and its distribution of the glass fiber on properties of the reinforced nylon were analyzed and studied.
以玻纤填充质量分数为30%玻纤增强尼龙6为例，分析和研究了玻璃纤维长度及其分布对增强尼龙6主要性能的影响。
However, the melt behavior of nylon 6 in blends was nearly unchanged.
而尼龙6的熔融行为基本上没有变化。
Iodine treatment results showed PPESK hindered crystal form transition of matrix nylon 6 due to interaction between PPESK and nylon 6.
碘处理研究发现PPESK对基体尼龙6的晶型转变起阻碍作用，表明PPESK与基体尼龙6间存在相互作用。
The process producing oligomer in the production of nylon 6 and the technical method of using oligomer to produce engineering plastics nylon 6 by direct polymerization have been introduced .
介绍尼龙6生产中低聚物产生的过程，以及利用低聚物直接聚合生产工程塑料用尼龙6的工艺方法。
Partial matrix yielding caused by this kind of flexible interlayer is the main mechanism of kaolin toughened nylon 6.
这种柔性界面层促使尼龙6基体局部区域塑性屈服被认为是高岭土增韧尼龙6的主要机理。
SEM photographs showed PES well dispersed in MC nylon 6 matrix.
扫描电子显微镜结果表明，PES均匀分散在基体MC尼龙6中。
The observation by means of SEM show that the state in which the rigid chain PAM in nylon — 6 is rod shape crystal which use chain or chain — bunch as core, and nylon —6 as coating.
SEM观察结果表明：刚性链PAM在尼龙—6中的存在形式为：以链或链束为核，以尼龙—6结晶为表的棒状结晶体。
A pretreating method for waste nylon 6 short fiber was proposed to improve the adhesion between short fiber and waste PP matrix and the dispersion of short fiber in matrix.
出一种废尼龙6短纤维预处理方法。采用这种方法能提高短纤维与废pp基质的粘合性能并改善短纤维在基质中的分散。
Modified nylon 6 has been widely used in various fields because of its excellent overall performance.
改性尼龙6因其优异的综合性能在各领域得到广泛应用。
The control system of caprolactam polymerization and nylon 6 spinning are introduced respectively.
对锦纶长丝聚合纺丝部分的自控系统进行了简要的介绍。
The main recovery process for nylon 6 residue was analyzed. A new recovery process was proposed and studied.
分析了尼龙6残渣回收的主要方法，提出新的回收方案，并对新方案进行了研究。
After glass fiber reinforced nylon 6, the performance index such as tensile strength and bending strength has improved several times.
用玻璃纤维增强尼龙6，使其拉伸强度和弯曲强度等性能指标成倍提高。
Nylon 6 is the early developed species of engineering plastics, its production is one of the largest in polyamide plastic.
尼龙6是工程塑料中开发最早的品种，是目前聚酰胺塑料中产量最大的品种之一（略）。
The Application in a state of silk mica action reinforcement and glass fiber as composite reinforcing system in Nylon 6 modified was introduced.
本文介绍了绢云母在尼龙6改性中作为增强剂及与玻璃纤维构成复合增强体系的应用情况。
The Application in a state of silk mica action reinforcement and glass fiber as composite reinforcing system in Nylon 6 modified was introduced.
本文介绍了绢云母在尼龙6改性中作为增强剂及与玻璃纤维构成复合增强体系的应用情况。
应用推荐