Caprolactam can be polymerized to a high elongation nylon-6 by alkaline catalyst, without ther use of activator.
研究了在无活化剂存在时己内酰胺的碱性催化聚合反应。
The delayed fluorescence of 1-amino-4-hydroxy-anthraquinone is observed in the phosphorescence spectrum of dyed nylon-6 fiber.
在研究用染料1 -氨基- 4 -羟基蒽醌染色的尼龙- 6单丝的燐光光谱时,观察到染料的延迟荧光。
In this paper, the development and production of nylon-6 plastics, the developing trends of their new techniques and new kinds were described.
论述了尼龙6塑料的研制、生产情况、新技术、新品种的开发动向。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
介绍了国内尼龙6的双螺杆反应挤出工艺。
The results show that the nanoparticles of montmorillonite dispersed in nylon 6 matrix play the role of nucleating agent.
结果表明分散在尼龙6基体中的蒙脱土纳米粒子起成核剂的作用。
A triple effect evaporation intermittent distillation process is used to recover caprolactam in the extraction wastewater from nylon 6 production.
采用三效蒸发-间歇蒸馏技术,从锦纶6生产装置的萃取废水中回收己内酰胺。
The increased distance is in inverse proportion to the content of montmorillonite in nylon 6 matrix.
撑开的距离和蒙脱土在尼龙6基体中的含量成反比。
A new technique for the durable flame retarding treatment of hydroxymethyl nylon 6 textiles with reactive flame retardants is put forward.
提出以羟甲基改性尼龙- 6织物与反应型有机磷系、溴系阻燃剂进行耐久性阻燃整理的新方法。
Reactive compound amine modifiers were introduced during the polymerization of caprolactam and the nylon 6 with amine modifiers modified was obtained.
在己内酰胺水解聚合时加入一定量的可反应型复合胺类改性剂,合成出含有胺类改性剂的尼龙6树脂。
As shown by experimental results, the capacity of modified sericite with higher diameter thickness ratio in strengthening nylon 6 is improved significantly.
实验结果表明,高径厚比改性绢云母增强尼龙6的力学性能有显著的提高。
SEM photographs showed PES well dispersed in MC nylon 6 matrix.
扫描电子显微镜结果表明,PES均匀分散在基体MC尼龙6中。
Modified nylon 6 has been widely used in various fields because of its excellent overall performance.
改性尼龙6因其优异的综合性能在各领域得到广泛应用。
A pretreating method for waste nylon 6 short fiber was proposed to improve the adhesion between short fiber and waste PP matrix and the dispersion of short fiber in matrix.
出一种废尼龙6短纤维预处理方法。采用这种方法能提高短纤维与废pp基质的粘合性能并改善短纤维在基质中的分散。
The main recovery process for nylon 6 residue was analyzed. A new recovery process was proposed and studied.
分析了尼龙6残渣回收的主要方法,提出新的回收方案,并对新方案进行了研究。
After glass fiber reinforced nylon 6, the performance index such as tensile strength and bending strength has improved several times.
用玻璃纤维增强尼龙6,使其拉伸强度和弯曲强度等性能指标成倍提高。
The effects of traditional PTFE micropowder and MP flame retardant on the fire resistance of melt drip of melamine cyanurate (MCA) flame retarding nylon 6 were studied.
考察传统抗滴落剂聚四氟乙烯(PTFE)微粉和氮磷复合型阻燃剂三聚氰胺磷酸盐(MP)对三聚氰胺氰尿酸(mca)阻燃尼龙6抗熔滴燃烧性的影响。
Using 30% glass fiber reinforced nylon 6 as a sample, the influences of the length and its distribution of the glass fiber on properties of the reinforced nylon were analyzed and studied.
以玻纤填充质量分数为30%玻纤增强尼龙6为例,分析和研究了玻璃纤维长度及其分布对增强尼龙6主要性能的影响。
Iodine treatment results showed PPESK hindered crystal form transition of matrix nylon 6 due to interaction between PPESK and nylon 6.
碘处理研究发现PPESK对基体尼龙6的晶型转变起阻碍作用,表明PPESK与基体尼龙6间存在相互作用。
The process producing oligomer in the production of nylon 6 and the technical method of using oligomer to produce engineering plastics nylon 6 by direct polymerization have been introduced .
介绍尼龙6生产中低聚物产生的过程,以及利用低聚物直接聚合生产工程塑料用尼龙6的工艺方法。
Partial matrix yielding caused by this kind of flexible interlayer is the main mechanism of kaolin toughened nylon 6.
这种柔性界面层促使尼龙6基体局部区域塑性屈服被认为是高岭土增韧尼龙6的主要机理。
In this paper, three different kinds of polyazomethines(PAM)/nylon 6 in situ polymerization composites were prepared using the process of monomer casting.
本文利用三种聚甲亚胺的单体与尼龙6单体通过原位聚合反应,制备了三种聚甲亚胺/尼龙6原位聚合复合材料,制备工艺采用浇铸法。
The results show that the tensile strength, breaking elongation, impact strength and MFR of nylon 6 increase simultaneously after some PAMAM were added. The optimum increment is 1.0%.
结果发现,在尼龙6中添加pamam后,尼龙6的拉伸强度、断裂伸长率、缺口冲击强度及熔体流动速率均有所提高,PAMAM添加量为1.0%时效果最佳。
In view of the characteristics of the nitrogen containing, organic wastewater from the production of nylon 6 (PA 6), a pre denitrification process is proposed for the treatment of the wastewater.
针对锦纶- 6 (PA - 6)含氮有机废水特性,提出前置反硝化脱氮工艺处理锦纶- 6废水。
The recovery process of monomer smoke at strand spinneret from nylon 6 production was analyzed.
分析比较了尼龙6生产中注带处单体烟的几种回收方法。
This paper summarizes the research progress of nylon 6 in-situ composite civilly and abroad in recent years.
综述了近年来国内外尼龙6原位复合材料的研究进展。
By using computer tomography (CT) instrument, the X-ray shielding property of nylon 6 composite with high tungsten concentration was investigated.
利用计算机断层扫描(CT)仪对高钨含量尼龙6复合材料的X射线屏蔽性能进行了研究。
The invention is suitable for enterprises which take lactam as a raw material to produce high-strength nylon 6.
本发明方法适用于以己内酰胺为原料生产高强度尼龙6轮胎帘子线和工程塑料的企业。
Surface hardness improvements of Nylon 6 implanted with ions were linked to mechanism of energy loss of ions.
离子注入后,尼龙6表面硬度提高与离子能量损失机制有关。
Our company is the largest producer of Nylon 6 industrial yarn and Nylon 6 tyre cord fabric in China and Asia.
我公司是中国和亚洲最大的尼龙6工业丝和尼龙6浸胶帘子布的生产厂家。
Our company is the largest producer of Nylon 6 industrial yarn and Nylon 6 tyre cord fabric in China and Asia.
我公司是中国和亚洲最大的尼龙6工业丝和尼龙6浸胶帘子布的生产厂家。
应用推荐