The article also studied the tracking quality in which the system has used the motor encoder and the velocity gyro as the velocity loop feedback respectively.
研究了分别以电机编码器和速率陀螺输出信号作为速度环反馈时，系统输出的跟踪特性。
Since the entire encoder rides on large motor style bearings, the unit can tolerate considerable shaft movement.
自从大电机式轴承整个编码器游戏机，该单位可以容忍相当大轴的运动。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Using an optical incremental encoder and hardware interface, the position of the motor rotor between the two teeth of the motor stator is measured.
采用高分辨率的增量式光电编码器和相应的硬件接口电路，实现了变磁阻电机转子在定子两个齿之间位移的检测。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
The system with CPU drives the DC brushless motor, and the encoder indicates the motor position outputting the sine and cosine signal.
系统采用CPU驱动直流无刷电机转动，编码器输出的正余弦信号指示电机的位置。
Encoder cables for signal transmission systems, motor connection cables for power transmission systems, to the 6fx 8002 standard.
信号传输系统用编码器电缆，电力传输系统用马达电缆，符合6fx 8002标准。
A synchronous motor Angle encoder with low cost, high practicality and RS-232 serial output interface based on PIC16F874 MCU is introduced in the paper.
本文基于PIC 16f874单片机，介绍了一种低成本、实用性强并提供RS- 232串口输出的高精度同步机角度编码器。
Making use of wire feed motor with encoder, a digital wire feeder system based on speed feedback of rotation speed with encoder of wire feed motor.
介绍了利用编码器实现送丝电机转速的数字反馈转速控制调速系统。
A rotary encoder and a torque detector are attached to each motor.
电机分别与旋转式编码器和扭矩检测器相连接。
The drive reads the motor data from the encoder.
该驱动器从编码器中读取电机数据。
The slave implements taping by the close loop system of the step motor and the rotary encoder.
从站通过步进电机和旋转编码器构成的闭环系统实现收带功能。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The conveyor motor shall be driven by a VFD per the Electrical Specification complete with encoder, gearbox, couplings, and mounting hardware.
输送机驱动马达应每VFD电气规格与编码器，齿轮箱，联轴节，安装硬件的完整驱动。
The brushless motor precisely controls the rotation of the auger, with a programmable encoder that provides more than 57,000 counts per 360 degree revolution.
无电刷电机精确地控制旋转的钻头，它具有可编程编码器，每360度计数超过57,000次。
A control unit of a motor driver feedback-controls current supplied to a linear motor according to a detection value of a linear encoder.
电动机驱动器的控制部基于线性编码器的检测值反馈控制对线性电动机的供给电流。
An integral electronic board, mounted to the side of the valve, may be utilized to control the 4-way directional valve and motor direction (when not using a rotary encoder control).
安装在计量阀侧边的集成电板可用于控制该独特的4通阀门和马达方向（在不使用旋转编码控制器时）。
Stage features micrometer grade screw with lead pitch 0.5 mm, miniature linear bearing and non-contact limit switches with a choice of either stepper or DC servo motor with encoder.
阶段具有千分尺等级螺钉以及0.5毫米的引脚间距的特点，微型直线轴承和非接触式限位开关带有，任一步进机或直流伺服电机编码器的选择。
In the inner closed loop, general PID control method based on encoder feedback of motor is adopted, and in the outer closed loop, a new fuzzy control based on position feedback of joint is adopted.
利用电机码盘反馈构成内位置环控制，采用一般的PID控制律；通过关节位置反馈形成外位置环控制，采用模糊控制算法。
The encoder measures the rotated Angle of the step motor and solves the problem of pulse losing by supplementing pulse, which ensures that the tape moves one fit step every time.
编码器检测步进电机旋转角度，以补发脉冲的方式解决了步进电机的丢步问题，保证载带每次运行恰好一个工位。
Our company has developed PMSM, the new controller of three-phase asynchronous frequency conversion motor, PMSM matching with the new controller and small elevator door operator without encoder.
与电网供电相比，变频器供电的异步 电机绝缘系统承受了更高的应力，因而有必要以新的标准对变频电机的绝缘系统进行重新考虑。
Travelling control system is composed of a transducer, an AC servo motor, an optical encoder and other components, which achieves precise control of the movable bench's position.
通过变频器、交流伺服电机、行程光电编码器等设备组成了行程控制系统，实现了可移动台架位置的精确控制。
Travelling control system is composed of a transducer, an AC servo motor, an optical encoder and other components, which achieves precise control of the movable bench's position.
通过变频器、交流伺服电机、行程光电编码器等设备组成了行程控制系统，实现了可移动台架位置的精确控制。
应用推荐