Material removal of optical element is done in "polishing spot".
被抛光光学元件的材料去除是在抛光区内实现的。
In ultrasonic machining, machining efficiency is directly effected by material removal rate.
超声加工过程中，材料的去除率直接影响加工效率。
When establishing the optimization model, the material removal rate was set as one constrain.
设计优化数学模型时，将金属去除率作为一个约束条件。
An experiment on material removal amount with the cutting distance and shape of passage is described.
介绍了用于研究材料去除量与加工距离和形状关系的实验。
Using the polishing pad with grooves or rougher surfaces can increase the material removal and planarization rate.
抛光垫粗糙的表面有利于提高材料去除率。
Metal cutting process is a very complex process. Fig. 7.2 shows the basic material removal operation schematically.
金属切削过程是一个很复杂的过程。图7.2用图的形式显示了基本材料去除作业。
It is a contradiction to achieve a high material removal rate and a super smooth surface in lapping of magnetic head.
同时获得高去除率和超光滑平整的表面是硬盘磁头自由磨粒抛光的矛盾，研究自由磨粒抛光材料去除规律可以优化抛光工艺。
These measurements have correlated well with those made in conventional constant material removal rate grinding tests.
这些测量结果与用传统的恒磨除率磨削试验具有良好的相关性。
The results are important for the understanding of the mechanism of material removal in the CMP of microelectronic materials.
其结果对于正确理解微电子材料cmp加工中的材料去除机理具有实际意义。
Material removal profile is proposed to describe the depth of material removal orthogonal to the tool path on a mold surface.
提出用表面去除廓形来描述模具表面在垂直于抛光轨迹方向的抛光去除量。
The experimental results show that the tool materials and cooling condition have obvious influences on material removal rates.
结果表明：刀具材料和冷却方式是影响玻璃陶瓷材料加工去除的主要因素。
The small value of glass breakage diameter and high material removal rates can be obtained by using diamond tool with small slots.
在电镀金刚石工具端部开槽，可获得小的玻璃崩边直径和高的材料去除率。
The dissertation constructs a relatively completed library of material removal volumes and describes the elements of it in detail.
本文建立了一个比较完备的材料去除形素体积库，对库中的材料去除形素体积也进行了详细地描述。
The test results show that the mechanism of ductile-mode material removal of the brittle material is attributed to a combination of.
试验结果表明，脆性材料的延性切削模式的实现是由于云母晶体对裂纹走向的引导和玻璃相的强烈的剪切变形能力的共同作用。
EDM in gas can make less electrode wear, but its high short circuit ratio will lead to unstable process and thus low material removal rate.
气中电火花加工时电极相对损耗很小，但由于短路率过高导致加工不稳定、材料去除率不高，还会产生烧焦气味。
The existence of the soft layer could increase the material volume removed by one particle and increase the material removal rate during CMP.
软质层的存在一方面增大单个磨料所去除材料的体积，增加材料去除速率；
Residual stress redistribution of blank due to part material removal is an important factor that results in the deformation of monolithic part.
材料去除导致毛坯中的残余应力重新分布是引起加工变形的重要因素。
This paper introduced the progress of the study on material removal mechanisms in ceramic grinding, some conclusions and Suggestions are given.
本文介绍了陶瓷磨削的材料去除机理方面的研究进展，就其进行了一定的讨论，并得出相关的结论。
During the process, high material removal rates are obtained while the tool electrode wear is extremely small and the sub-surface is not damaged.
通过这个过程，当工具电极(阳级？)只有极小的损耗时材料便获得了了迁移速度，并且并不危害副表面。
Successful design of tools for the material removal processes requires, above all, a complete understanding of cutting tool function and geometry.
为材料的去除工艺而成功设计的刀具，首先需求的是对工具功能和形状的彻底了解。
In the process of EDM, dielectric medium has remarkable influence on material removal rate, surface quality of the workpiece and relative electrode wear ratio.
电火花加工中，放电介质对工件的材料去除率、表面质量以及电极相对损耗率有重要影响。
In this paper the development of the investigations of material removal mechanisms in ceramic grinding is described, and some discussions and conclusions are given.
介绍了陶瓷磨削的材料去除机理方面的研究进展，就其进行了一定的讨论，并得出相关的结论。
The experiment illustrated that the small value of glass breakage diameter and high material removal rates could be obtained by using diamond tool with small slots.
试验结果表明，在电镀金刚石工具端部开槽，可获得小的玻璃爆边直径和高的材料去除率。
Adding the right amount of the additives and increasing the particle size can improve the effect of the mechanical reaction to achieve higher material removal rate.
加入适量添加剂，可增大反应产物的体积，易于提高机械作用的效果，以获得较高的去除速率。
Normally as a result, material removal rates and therefore dicing speed is lowered and the laser capability with respect to the available power is far from optimized.
通常情况下，剥离速度和切割速度都是很低的。基于其本身的能力来讲，激光器没有运行在最优化的状态下。
The physical? composition of the workpiece greatly influences the selection of the machining method, the tool composition and geometry, and the rate of material removal.
合成工件很大程度上影响了加工方法的选择，工具的合成及其几何形状，还影响了材料的去除的速度。
Material removal by machining involves interaction of five elements: the cutting tool, the toolholding and guiding device, the workholder, the workpiece, and the machine.
材料的切削与5个因素有关：刀具，刀具的夹具和导向装置，工件的夹具，工件和加工机器。
Material removal by machining involves interaction of five elements: the cutting tool, the toolholding and guiding device, the workholder, the workpiece, and the machine.
材料的切削与5个因素有关：刀具，刀具的夹具和导向装置，工件的夹具，工件和加工机器。
应用推荐