• If not, a specially designed tool will be used to pry apart the top and bottom flanges.

    如果螺栓无法拆卸,将使用一种专门设计的工具把上下法兰盘撬开。

    youdao

  • The surface of flanges don't fit well.

    法兰平面贴合不好。

    youdao

  • CCD flanges for resolution or imaging optimization.

    优化成像质量或谱分辨率的两种CCD法兰盘。

    youdao

  • Slip on flanges are not to be used in Hydrogen Service.

    富氢环境中不允许使用活套法兰。

    youdao

  • Lower the valve into position between the pipeline flanges.

    将阀门放低,使其进入管道法兰之间的位置。

    youdao

  • This may cause an inadequate seal between the valve and flanges.

    这可能会导致阀门和法兰之间的密封出现问题。

    youdao

  • The engine-feed system interface is at the turbopump inlet flanges.

    发动机与供应系统的交界是在涡轮泵的进口法兰盘处。

    youdao

  • The engine-feed system interface is at the turbopump inlet flanges .

    发动机与供应系统的交界是在涡轮泵的进口法兰盘处。

    youdao

  • The gasket faces of girth flanges shall be machined after final heat treatment.

    在最终热处理后翼缘法兰的垫片的端面应进行加工。

    youdao

  • Class 250 cast iron and Class 300 steel flanges can not be used on these valves.

    在这些阀门上不能使用250磅级铸铁和300磅级钢法兰。

    youdao

  • Adjust windshield glass position until it is aligned with the flanges and adhesive.

    调整挡风玻璃位置直至与凸缘和粘结剂对准。

    youdao

  • This latter functional sulcus determines the extension limit of the denture flanges.

    后者,也就是功能性沟决定了基托的伸展范围。

    youdao

  • Casting parts, Machined parts, fasteners, flanges, stamped parts, well LIDS and the like.

    铸造件,机加工件,紧固件,法兰,冲压件,井盖等。

    youdao

  • Furthermore, the contribution of flanges to the shear resistance of the wall was analysed.

    同时还分析了翼缘对墙片的抗剪承载力的贡献。

    youdao

  • When installing the pipeline with flange, the gasket must be placed between the two butt flanges.

    安装带法兰的管路时,必须在两个对接法兰的密封间放置垫片。

    youdao

  • A. N. S. I. Standard b16.1-covers cast iron pipe flanges and flanged fittings (Class 125 and 250).

    标准B16.1 -包括铸铁管道法兰和法兰连接件(125磅级和250磅级)。

    youdao

  • Remove the old sleeve by bending the flanges at one end and withdrawing the sleeve from the other end.

    要拆卸旧套管,要通过弯曲法兰的一端,然后将套管从另一端抽出来。

    youdao

  • Rolling flanges should conform to Appendix A (standard appendix), and be selected according toTableA1, A2.

    轧制法兰应符合附录A(标准的附录)的规定,并按表A1,A2选用。

    youdao

  • Industrial pipeworks. Forged steel flanges and collars. Materials. Mechanical properties. Fabrication. Tests.

    工业管道系统。锻制钢法兰和套圈。材料。机械性能。制造。试验。

    youdao

  • Blend steel welding of flanges is allowed. Long neck flange should conform to related stipulations of GB 150.

    法兰允许用钢板拼接焊制,对长颈法兰应符合GB 150的有关规定。

    youdao

  • The type, rating and facing of nozzle flanges shall conform to those specified in Purchaser's drawing or data sheet.

    设备口法兰的类型、等级及端面应符合买方图纸或数据表的规定。

    youdao

  • The method can be also applied to the stress analysis of a conical shell with uniform thickness connected with flanges.

    本法亦可近似用于等壁厚锥壳与平法兰连接的应力计算。

    youdao

  • When installing the Series 4700, it is recommended that galvanized steel back up rings be used behind the valve flanges.

    在安装系列4700夹管阀时,建议在阀门法兰后面采用镀锌钢支撑环加固。

    youdao

  • The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt.

    本阀可水平安装或垂直安装,安装时两法兰联接中间必须加密封垫片,然后均匀锁紧螺栓。

    youdao

  • Formation of protective films in highly recessed areas such as flanges and box sections provides critical corrosion protection.

    电泳漆在非常隐蔽的部位,如翻边以及箱式结构,仍能形成完整的保护膜,从而得到较高的防腐蚀性。

    youdao

  • The main deformation areas of the rectangular box in deep drawing were flanges and the circle-corners of female die in the corners.

    盒形件拉深主要变形区集中在盒形件角部的法兰和凹模圆角部位。

    youdao

  • During the process of analysis, concerning the stiffening action on the flanges by bolts, the application range of the joint is given.

    在分析过程中,考虑了螺栓对法兰盘的加劲作用,并给出该类节点的使用范围。

    youdao

  • During the process of analysis, concerning the stiffening action on the flanges by bolts, the application range of the joint is given.

    在分析过程中,考虑了螺栓对法兰盘的加劲作用,并给出该类节点的使用范围。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定